Volume 37 Issue 4
Apr.  2022
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2022  >  37(4): 856-868
ZENG Biao, ZHOU Yuansheng, WANG Shenghui, HE Yuhui, TANG Jinyuan. Tooth profile error measurement of face gear based on general coordinate measuring machine[J]. Journal of Aerospace Power, 2022, 37(4): 856-868. doi: 10.13224/j.cnki.jasp.20210238
Citation: ZENG Biao, ZHOU Yuansheng, WANG Shenghui, HE Yuhui, TANG Jinyuan. Tooth profile error measurement of face gear based on general coordinate measuring machine[J]. Journal of Aerospace Power, 2022, 37(4): 856-868. doi: 10.13224/j.cnki.jasp.20210238
shu

Tooth profile error measurement of face gear based on general coordinate measuring machine

doi: 10.13224/j.cnki.jasp.20210238
  • 1.

    College of Mechanical and Electrical Engineering， Central South University，Changsha 410083，China

  • 2.

    State Key Laboratory of High Performance Complex Manufacturing， Central South University，Changsha 410083，China

  • Received Date: 2021-05-13
  • Publish Date: 2022-04-28
    Abstract
  • By considering the truth of the existence of machining errors of face gear，an iterative method was applied to make measurement coordinate system as close as possible to design coordinate system.The optimization model of the relationship between measurement coordinate system and design coordinat system was constrained according to the machining errors.This optimization model was accurately solved based on the above two steps.Furthermore，a mathematical model between the theoretical measurement point and the practical measurement point was established to compensate the related measurement errors caused by machining errors.Finally，the actual measurement experiment was carried out.The results showed that the error between the measurement coordinate system and the design coordinate system of this method was reduced by more than 89% compared with the traditional method，the maximum measurement deviation was reduced by more than 54%，presenting more real and reliable measurement results.

     

    • FullText(HTML)
  • loading
    • References(33)
  • [1]
    LEWICKI D G,HANDSCHUH R F,HEATH G F,et al.Evaluation of carburized and ground face gears[J].Journal of the American Helicopter Society,2000,45（2）:118-124.
    [2]
    LITVIN F L,FUENTES A,HOWKINS M.Design generation and TCA of new type of asymmetric face-gear drive with modified geometry[J].Computer Methods in Applied Mechanics and Engineering,2001,190（43/44）:5837-5865.
    [3]
    贾振元,王永青,王福吉,等.高性能复杂曲面零件测量-再设计-数字加工一体化加工方法[J].机械工程学报,2013,49（19）:126-132.
    [4]
    SHI Xianlin,ZHOU Yuansheng,TANG Jinyuan,et al.An innovative generated approach to dressing the worm for grinding spur face gears[J].Manufacturing Letters,2020,25:26-29.
    [5]
    TANG Jinyuan,YIN Feng,CHEN Xingming.The principle of profile modified face-gear grinding based on disk wheel[J].Mechanism and Machine Theory,2013,70（2）:1-15.
    [6]
    BAGCI E.Reverse engineering applications for recovery of broken or worn parts and re-manufacturing:three case studies[J].Advances in Engineering Software,2009,40（6）:407-418.
    [7]
    GONZALEZ P I,FUENTES A.Tooth contact analysis of cylindrical gears reconstructed from point clouds[M].Berlin,Germany:Springer，2020:219-237.
    [8]
    GUO Xiaozhong,SHI Zhaoyao,YU Bo,et al.3D measurement of gears based on a line structured light sensor[J].Precision Engineering,2020,61:26-29.
    [9]
    LU Chunxia,WANG Jianhua,YIN Peili,et al.Error identification of measurement software based on digital twin of gear measuring center[J].Measurement,2020,173:108666.1-108666.9.
    [10]
    LIN Hu,KELLER F,MARTIN S.Influence and compensation of CMM geometric errors on 3D gear measurements[J].Measurement,2020,151:107110.1-107110.9.
    [11]
    石照耀,韦志会.精密测头技术的演变与发展趋势[J].工具技术,2007,41（2）:3-8.
    [12]
    TAKEDA R,FANG Suping,LIU Yongsheng,et al.Precision compensation method for tooth flank measurement error of hypoid gear[J].Measurement,2016,89:305-311.
    [13]
    FEI Lan,DANTAN J,BAUDOUIN C,et al.Calibration and uncertainty estimation of non-contact coordinate measurement systems based on Kriging models[J].Precision Engineering,2019,57:16-29.
    [14]
    石照耀,张华,汤洁.论曲面测量各向异性[J].机械工程学报,2014,50（18）:1-6.
    [15]
    LIU Yongsheng,FANG Suping,WANG Huiyi,et al.Compensation method for the alignment angle error in pitch deviation measurement[J].Measurement Science and Technology,2016,27（5）:055008.1-055008.8.
    [16]
    FANG Suping,LIU Yongsheng,WANG Huiyi,et al.Compensation method for the alignment angle error of a gear axis in profile deviation measurement[J].Measurement Science and Technology,2013,24（5）:55-58.
    [17]
    SHI Yipei,YOU C H.On-machine quasi-3D scanning measurement of bevel gears on a five-axis CNC machine[J].Journal of Engineering,2017,40（3）:207-218.
    [18]
    LI Gang,WANG Zhonghou,KUBO A.Error-sensitivity analysis for hypoid gears using a real tooth surface contact model[J].Proceedings of the Institution of Mechanical Engineers:Part C Journal of Mechanical Engineering Science,2015,231（3）:507-521.
    [19]
    ZHANG Yanshun,GUO Yajing,LI Kui,et al.Error compensation method for inclination measurement under the influence of the dynamic interference[J].IEEE Sensors Journal,2016,16（3）:734-741.
    [20]
    LIN Chao,CAO Xijun,FAN Yu,et al.Pitch deviation measurement and analysis of curve-face gear pair-science direct[J].Measurement,2016,81:95-101.
    [21]
    ZHAO Ning,HOU Shengwen,GUO Hui,et al.The correction of face gear tooth flank deviation[J].Advanced Materials Research,2012,503/504:1120-1124.
    [22]
    王延忠,王庆颖,吴灿辉,等.正交面齿轮齿面偏差的坐标测量[J].机械传动,2010,34（7）:1-4.
    [23]
    王延忠,钟扬,侯良威,等.航空面齿轮磨削碟形砂轮修整方法及误差分析[J].航空动力学报,2017,32（1）:120-129.
    [24]
    HEATH G,FILLER R,TAN Jie.Development of face gear technology for industrial and aerospace power transmission[R].NASA/CR-2002-211320,2002.
    [25]
    王志,石照耀.CMM测量正交面齿轮的误差理论分析[J].北京工业大学学报,2012,38（5）:663-667.
    [26]
    唐进元,李武俊,张燕,等.基于齿距偏差曲面的面齿轮齿距偏差测量[J].中南大学学报（自然科学版）,2015,46（2）:459-464.
    [27]
    林超,曹喜军,王瑶,等.正交变传动比面齿轮齿面法向偏差测量及分析[J].东北大学学报（自然科学版）,2015,36（11）:1658-1662.
    [28]
    ZHOU Yuansheng,WU Yuanhang,WANG Liming,et al.A new closed-form calculation of envelope surface for modeling face gears[J].Mechanism and Machine Theory,2019,137:211-226.
    [29]
    WANG Shenghui,ZHOU Yuansheng,TANG Jinyuan,et al. Digital tooth contact analysis of face gear drives with an accurate measurement model of face gear tooth surface inspected by CMMs[J].Mechanism and Machine Theory,2022,167：104498.1-104498.20.
    [30]
    SHAO Wen,DING Han,TANG Jinyuan.Data-driven operation and compensation approaches to tooth flank form error measurement for spiral bevel and hypoid gears[J].Measurement,2018,122:347-357.
    [31]
    LITVIN F L,FUENTES A.Gear geometry and applied theory[M].2nd.ed.New York:Cambridge University Press,2008:97-99.
    [32]
    孙玉文,郭东明,贾振元.复杂曲面的测量加工一体化[J].科学通报,2015,60（9）:781-791.
    [33]
    王军,王小椿,姜虹,等.螺旋锥齿轮齿面的三坐标测量[J].机械工程学报,2003,39（6）:151-154.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(2274.0KB)
    XML

    Article Metrics

    Article views (563) PDF downloads(87) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return