Volume 37 Issue 6
Jun.  2022
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2022  >  37(6): 1217-1224
ZHANG Huan, LIAO Mingfu. Method of dynamic stress measurement calibration tests for compressor blades[J]. Journal of Aerospace Power, 2022, 37(6): 1217-1224. doi: 10.13224/j.cnki.jasp.20210273
Citation: ZHANG Huan, LIAO Mingfu. Method of dynamic stress measurement calibration tests for compressor blades[J]. Journal of Aerospace Power, 2022, 37(6): 1217-1224. doi: 10.13224/j.cnki.jasp.20210273
shu

Method of dynamic stress measurement calibration tests for compressor blades

doi: 10.13224/j.cnki.jasp.20210273
  • 1.

    School of Power and Energy， Northwestern Polytechnical University，Xi'an 710072，China

  • 2.

    Commercial Aircraft Engine Corporation Limited， Aero Engine Corporation of China，Shanghai 201306，China

  • Received Date: 2021-06-01
  • Publish Date: 2022-06-28
    Abstract
  • A method to improve the dynamic stress measurement accuracy for compressor blades was introduced.Dynamic stress calibration tests of the instrumented blades were carried out before assembly of the rotor.Strain gauge sensitivity ratios of the measured strain to the maximum modal strain for each vibration mode of the instrumented blades were acquired.The ratios were helpful in defining strain monitoring limits for the blades during engine tests，which made blade vibration safety monitoring more accurate.Advantages and drawbacks of two calibration methods，direct stress and af strength method （the product of vibration amplitude a multiplies vibration frequency f），were comparatively analyzed.Based on the direct stress method，stress calibration tests for two compressor blades were carried out.Results showed that the measured gauge sensitivity ratios of the 1# blade for the 1st mode and the 3rd mode were larger than the theoretical ratios with values of 17.4% and 24% respectively.And the gauge sensitivity ratio differences of the two blades （1# blade and 2# blade） for the 1st vibration mode reached 14.8%.It proved that calibration tests could improve measured data validation for blade dynamic stress comprehensively.

     

    • FullText(HTML)
  • loading
    • References(20)
  • [1]
    170厂,驻170厂军代表室.航空发动机叶片失效分析及预防措施研究[C]∥航空发动机叶片故障及预防研讨会论文集.北京:航空工业出版社，2005:74-95.
    [2]
    COWLES B A.High cycle fatigue in aircraft gas turbines-an industry perspective[J].International Journal of Fracture，1996，80（2）:147-163.
    [3]
    NICHOLAS T.High cycle fatigue A mechanics of materials perspective[M].London，UK:Elsevier，2006.
    [4]
    Federal Aviation Administration.Airworthiness standards:aircraft engines：14 CFR Part 33 Subpart F[S].Washington,US：Federal Aviation Administration，2003:45.
    [5]
    吴大观.不容忽视发动机叶片动应力测量的作用[J].燃气涡轮试验与研究，1996，9（1）:58-62.
    [6]
    彭建，刘兵.压气机转子叶片动频动应力测试技术和应用研究[J].燃气涡轮试验与研究，2003，16（1）:10-13.
    [7]
    曹昆华，黄家经.某型发动机低压涡轮转子叶片动测技术及应用研究[J].燃气涡轮试验与研究，2008，21（1）：22-25.
    [8]
    卢艳辉，梅庆，雷沫枝，等.高转速压气机转子叶片的动应力测试与动力学设计评估[J].推进技术，2014，35（10）：1398-1403.
    [9]
    王奉明，贺进，朱俊强.高转速小尺寸涡轮叶片动应力测量方法与应用[J].推进技术，2018，39（6）:1406-1411.
    [10]
    张再德，文华.涡轴发动机燃气涡轮叶片动应力测试技术研究及验证[J].燃气涡轮试验与研究，2019，32（3）:8-12.
    [11]
    WILLIAMS R J，JOHAL K L，BARTON H A，et al.Prediction and measurement of rotor blade/stator vane dynamic characteristics of a modern aero-engine axial compressor[C]∥Proceedings of the Conference Held at the University of Liverpool，Oxford，UK:Pergamon Press，1989:163-169.
    [12]
    DANFORTH C E.Blade vibration:some key elements in design verification[J].Journal of Aircraft，1975，12（4）:333-342.
    [13]
    SARAVANAMUTTOO H I H，ROGERS G F C，COHEN H，et al.Gas turbine theory[M].7th ed.Harlow，UK:Pearson Education Limited，2017.
    [14]
    ARMSTRONG E K.Recent blade vibration techniques[J].Journal of Engineering for Power，1967,89（3）:437-444.
    [15]
    ARMSTRONG E K.Fatigue and assessment methods of blade vibration[M]∥AGARD（Advisory Group for Aerospace Reaearch and Development）.AGARD Manual on Aeroelasticity in Axial-Flow Turbomachines:Volume 2 Structural Dynamics and Aeroelasticity，Essex，UK:Specialised Printing Services Limited，1988:33-34.
    [16]
    宋兆泓.航空燃气涡轮发动机强度设计[M].北京：北京航空学院出版社，1988.
    [17]
    BLACKWELL B D.Some investigations in the field of blade engineering[J].Journal of the Royal Aeronautical Society，1958，62（573）:633-646.
    [18]
    ARMSTRONG E K，CROWCROFT R S，HUNT T M.Fatigue life of compressor blading[C]∥Proceedings of the Institution of Mechanical Engineers，London:SAGE Publications，1966,180（39）:61-70.
    [19]
    PASSEY R D C.Reliability of compressor aero foils[J].Progress in Aerospace Sciences，1976，17（3）:67-92.
    [20]
    中国民用航空局.航空发动机适航规定:CCAR-33-R2[S].北京：中国民用航空局，2016:37.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(694.0KB)
    XML

    Article Metrics

    Article views (495) PDF downloads(112) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return