| Citation: | CHEN Yalong, MA Huifang, HUANG Yanzhong, et al. Experimental study on the effect of cavitation of squeeze film damper under low oil supply pressure[J]. Journal of Aerospace Power, 2024, 39（7）：20220061 doi: 10.13224/j.cnki.jasp.20220061
|
Oil film cavitation can’t be avoided during normal operation of squeeze film damper (SFD). In order to study the change of rotor fundamental frequency vibration during long-term operation of SFD and the erosion of SFD oil film cavitation effect on the metal surface of inner and outer rings of SFD, experimental study of SFD cavitation effect under low oil supply pressure (0.02—0.05 Mpa) was carried out based on a full-scale aeroengine high-pressure rotor test rig to investigate the change of rotor fundamental frequency vibration during long-term operation of SFD at critical speed, and the effect of oil film cavitation on the internal and external surface morphology of SFD after long-time operation. The experiment results showed that the SFD oil film cavitation could erode the surface of the inner ring of SFD after long-time operation, forming water drop, oval and irregular pit groups, proving that assessing the SFD cavitation effect near the critical speed is a necessary experiment content for the operation safety of SFD under low oil supply pressure.
| [1] |
KU C P,TICHY J A. An experimental and theoretical study of cavitation in a finite submerged squeeze film damper[J]. Journal of Tribology,1990,112(4): 725-732. doi: 10.1115/1.2920321
|
| [2] |
DIAZ S E,SAN ANDRES L A. Measurements of pressure in a squeeze film damper with an air/oil bubbly mixture[J]. Tribology Transactions,1998,41(2): 282-288. doi: 10.1080/10402009808983749
|
| [3] |
ZEIDAN F Y,VANCE J M. Cavitation leading to a two phase fluid in a squeeze film damper[J]. Tribology Transactions,1989,32(1): 100-104. doi: 10.1080/10402008908981868
|
| [4] |
WANG Zhenlin,ZHANG Guanghui,WEN Jianquan,et al. Numerical modeling of the flow in the squeeze film dampers with oil feed groove by computational fluid dynamic analysis[J]. Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology,2017,231(6): 693-707.
|
| [5] |
SAN ANDRÉS L,DELGADO A. Identification of force coefficients in a squeeze film damper with a mechanical end seal—centered circular orbit tests[J]. Journal of Tribology,2007,129(3): 660-668. doi: 10.1115/1.2736708
|
| [6] |
LAURENTIU M. A brief discussion regarding types of cavitation in squeeze film dampers and cavitation effects[J]. INCAS BULLETIN,2017,9(1): 71-76. doi: 10.13111/2066-8201.2017.9.1.7
|
| [7] |
FAN Tieshu,HAMZEHLOUIA S,BEHDINAN K. The effect of lubricant inertia on fluid cavitation for high-speed squeeze film dampers[J]. Journal of Vibroengineering,2017,19(8): 6122-6134. doi: 10.21595/jve.2017.19314
|
| [8] |
崔颖,李婷,江齐,等. 基于两相流模型的挤压油膜阻尼器空化流场特性数值模拟[J]. 航空动力学报,2019,34(8): 1781-1787. CUI Ying,LI Ting,JIANG Qi,et al. Numerical simulation on cavitation flow field characteristics of squeeze film damper based on two-phase flow model[J]. Journal of Aerospace Power,2019,34(8): 1781-1787. (in Chinese
|
| [9] |
YAN W,LI X,LI Y. CFD simulation of air ingestion in a squeeze film damper: GT2019-91285 [R]. Phoenix,US: ASME ,2019.
|
| [10] |
IACOBELLIS V,BEHDINAN K,CHAN D,et al. Effect of hole feed system on the response of a squeeze film damper supported rotor[J]. Tribology International,2020,151: 106450. doi: 10.1016/j.triboint.2020.106450
|
| [11] |
TUL’CHINSKII G A,PANKRATOV G A. Experience of on-site investigations of the cavitation erosion of hydraulic turbines[J]. Hydrotechnical Construction,1988,22(2): 120-123. doi: 10.1007/BF01428977
|
| [12] |
OKADA T,IWAI Y,AWAZU K. A study of cavitation bubble collapse pressures and erosion part 1: a method for measurement of collapse pressures[J]. Wear,1989,133(2): 219-232. doi: 10.1016/0043-1648(89)90037-9
|
| [13] |
CHEN Haosheng,LI Jiang,CHEN Darong,et al. Damages on steel surface at the incubation stage of the vibration cavitation erosion in water[J]. Wear,2008,265(5/6): 692-698.
|
| [14] |
OKA Y I,HAYASHI H. Evaluation of erosion resistance for metal–ceramic composites and cermets using a water-jet testing apparatus[J]. Wear,2011,271(9/10): 1397-1403.
|
| [15] |
KAZAMA T,KUMAGAI K,OSAFUNE Y,et al. Erosion of grooved surfaces by cavitating jet with hydraulic oil[J]. Journal of Flow Control,Measurement & Visualization,2015,3(2): 41-50.
|
| [16] |
DULAR M,PETKOVŠEK M. On the mechanisms of cavitation erosion–coupling high speed videos to damage patterns[J]. Experimental Thermal and Fluid Science,2015,68: 359-370. doi: 10.1016/j.expthermflusci.2015.06.001
|
| [17] |
ROMANOV A,EVDOKIMOV S,SELIVERSTOV V. Cavitation research results of hydroturbine impeller blades and their analysis[J]. MATEC Web of Conferences,2018,196: 02006. doi: 10.1051/matecconf/201819602006
|
| [18] |
ABOUEL-KASEM A,OSMAN O O,KARRAB S A,et al. The limited role of pit formed by microjet in evolution of cavitation erosion in the incubation period[J]. Journal of Tribology,2022,144(4): 041702. doi: 10.1115/1.4051653
|
| [19] |
ZAKRZEWSKA D E,BUSZKO M H,KRELLA A K,et al. Damage development on the surface of nickel coating in the initial period of erosion[J]. Materials,2021,14(11): 3123.1-3123.14. doi: 10.3390/ma14113123
|
| [20] |
ZEIDAN F,VANCE J. Cavitation and air entrainment effects on the response of squeeze film supported rotors[J]. Journal of Tribology,1990,112(2): 347-353. doi: 10.1115/1.2920263
|
| [21] |
DIAZ S,SAN ANDRE´S L. A model for squeeze film dampers operating with air entrainment and validation with experiments[J]. Journal of Tribology,2001,123(1): 125-133. doi: 10.1115/1.1330742
|
| [22] |
张微,王浩洁,丁千,等. 极低压下两相流挤压油膜阻尼器油膜参数特性[J]. 航空动力学报,2020,35(3): 560-568. ZHANG Wei,WANG Haojie,DING Qian,et al. Oil film characteristic of two-phase flow squeeze film damper under extremely low oil supply pressure[J]. Journal of Aerospace Power,2020,35(3): 560-568. (in Chinese
|
DownLoad:
