| Citation: | LIU Daxiang, JIN Jie, LIU Denghuan. Position and function of numerical simulation technology in aero-engine development[J]. Journal of Aerospace Power, 2022, 37（10）：2017-2024 doi: 10.13224/j.cnki.jasp.20220103
|
The definition and implication of numerical simulation technology were proposed based on the technical development requirements of advanced aero-engines development.The dimensions of aero-engine numerical simulation technology were studied from specialty,discipline,space,time and tools,while the strategic position and function in promoting the transformation of aero-engine development method were analyzed.The disparity of numerical technology for aero-engine at home and abroad was discussed by analyzing the development status of typical foreign research plans and projects.It is proposed to fully understand the important position and function of numerical simulation technology in the aero-engine development,and to build and develop our own aero-engine numerical system and industry-wide “aero-engine database” as soon as possible.
| [1] |
曹建国. 航空发动机仿真技术研究现状、挑战和展望[J]. 推进技术,2018,39(5): 961-970.
CAO Jianguo. Status,challenges and perspectives of aero-engine simulation technology[J]. Journal of Propulsion Technology,2018,39(5): 961-970. (in Chinese)
|
| [2] |
孙见忠,易杨,文洪,等. 航空发动机全寿命维修概率建模与仿真[J]. 航空动力学报,2022,37(3): 573-588. doi: 10.13224/j.cnki.jasp.20210160
SUN Jianzhong,YI Yang,WEN Hong,et al. Life cycle probabilistic modeling and simulation of aero-engine maintenance[J]. Journal of Aerospace Power,2022,37(3): 573-588. (in Chinese) doi: 10.13224/j.cnki.jasp.20210160
|
| [3] |
朱芳,陈云永,卫飞飞,等. 某民用大涵道比涡扇发动机风扇缩尺试验件气动性能数值仿真[J]. 航空动力学报,2013,28(7): 1539-1548.
ZHU Fang,CHEN Yunyong,WEI Feifei,et al. Numerical simulation of aerodynamic performance of scaled fan of a civil high-bypass-ratio turbofan engine[J]. Journal of Aerospace Power,2013,28(7): 1539-1548. (in Chinese)
|
| [4] |
关鹏,艾延廷,王志,等. 热冲击后气膜冷却叶片结构强度流固热耦合仿真[J]. 航空动力学报,2018,33(8): 1811-1820.
GUAN Peng,AI Yanting,WANG Zhi,et al. Structural strength simulation of film cooling vane after heat shock by thermal/flow/structure coupling[J]. Journal of Aerospace Power,2018,33(8): 1811-1820. (in Chinese)
|
| [5] |
楚娜娜,张曙光,高艳蕾,等. 基于Simscape模型的航空发动机系统安全性分析方法[J]. 航空动力学报,2021,36(4): 885-896.
CHU Nana,ZHANG Shuguang,GAO Yanlei,et al. Safety analysis method of aero-engine systems based on Simscape model[J]. Journal of Aerospace Power,2021,36(4): 885-896. (in Chinese)
|
| [6] |
洪杰,张姿,徐筱李,等. 航空发动机结构系统的可靠性模型[J]. 航空动力学报,2016,31(8): 1897-1904.
HONG Jie,ZHANG Zi,XU Xiaoli,et al. Reliability model of aero-engine structural system[J]. Journal of Aerospace Power,2016,31(8): 1897-1904. (in Chinese)
|
| [7] |
杜方舟,孙有朝,郭媛媛. 基于数据的航空发动机排气温度裕度及剩余寿命计算方法[J]. 航空动力学报,2020,35(11): 2456-2464.
DU Fangzhou,SUN Youchao,GUO Yuanyuan. Calculation method of aero-engine exhaust gas temperature margin,and remaining life based on data[J]. Journal of Aerospace Power,2020,35(11): 2456-2464. (in Chinese)
|
| [8] |
陶海亮,朱阳历,郭宝亭,等. 压气机叶片流固耦合数值计算[J]. 航空动力学报,2012,27(5): 1054-1060. doi: 10.13224/j.cnki.jasp.2012.05.016
TAO Hailiang,ZHU Yangli,GUO Baoting,et al. Numerical simulation of aeroelastic response in compressor based on fluid-structure coupling[J]. Journal of Aerospace Power,2012,27(5): 1054-1060. (in Chinese) doi: 10.13224/j.cnki.jasp.2012.05.016
|
| [9] |
刘邓欢,金捷,王方,等. 涡轮喷气式发动机整机环境下折流燃烧室性能试验[J]. 航空动力学报,2015,30(10): 2410-2415.
LIU Denghuan,JIN Jie,WANG Fang,et al. Performance test of slinger combustor of turbojet engine running in engine test[J]. Journal of Aerospace Power,2015,30(10): 2410-2415. (in Chinese)
|
| [10] |
SKIRA C A. Reducing military aircraft engine development cost through modeling and simulation[R]. Paris:RTO Meeting,2002.
|
| [11] |
金捷. 美国推进系统数值仿真(NPSS)计划综述[J]. 燃气涡轮试验与研究,2003,16(1): 57-62. doi: 10.3969/j.issn.1672-2620.2003.01.013
JIN Jie. A summary of numerical propulsion simulation system (NPSS) by NASA[J]. Gas Turbine Experiment and Research,2003,16(1): 57-62. (in Chinese) doi: 10.3969/j.issn.1672-2620.2003.01.013
|
| [12] |
NICHOLS D L,CHAMIS C C. Numerical propulsion system simulation:an interdisciplinary approach[R]. AIAA-91-3554,1991.
|
| [13] |
LYTLE J,REMAKLUS D A,NICHOLS L D. Numerical propulsion system simulation[J]. Computing Systems in Engineering,1990,2(4): 357-364.
|
| [14] |
TURNER M. Lessons learned from the GE90 3-D full engine simulations[R]. AIAA-2010-1606,2010.
|
| [15] |
TURNER M,NORRIES A,VERES J. High fidelity 3D simulation of the GE90 (invited)[R]. AIAA-2003-3996,2003.
|
| [16] |
IVANOV M,NIGMATULLIN R. Interconnected multi-level design of gas turbine elements[R]. AIAA- 2003-1215,2003.
|
| [17] |
PANCHENKO V,MOUSTAPHA H,MAH S,et al. Preliminary multi-disciplinary optimization in turbomachinery design[R]. Paris:RTO Meeting,2002.
|
| [18] |
LARSSON T C,HOMSI P. VIVACE - value improvement through a virtual aeronautical collaborative enterprise[R]. Helsinki:VIVACE Public,2014.
|
DownLoad:
