| Citation: | LUO Ya, YANG Benmeng, TU Wenbing. Dynamic modeling of the contact between cage and rolling element in rolling bearing and contact characteristics[J]. Journal of Aerospace Power, 2022, 37（12）：2887-2895 doi: 10.13224/j.cnki.jasp.20220571
|
Nonlinear spring element and damping element were used to simulate the collision contact between the cage and the rolling element, and a dynamic model of rolling bearing was proposed considering some nonlinear factors such as collision contact, friction, cage pocket clearance, etc. Collision contact characteristics between the cage and the rolling element were investigated by dynamic simulation, the influences of bearing load and rotational speed on the cage contact characteristics were also analyzed. The results showed that discontinuous collision contacts appeared between the rolling element and cage pocket front bar or rear bar alternately, and the rotational speed of the cage fluctuate d irregularly because of the contact forces. The maximum contact force and the fluctuation range of cage rotatioanal speed decreased with the increase of bearing radial load, and increased with the increase of rotational speed of bearing. The proposed model can provide a theoretical basis for the design of rolling bearing and failure analysis of the cage.
| [1] |
GHAISAS N,WASSGREN C R,SADEGHI F. Cage instabilities in cylindrical roller bearings[J]. Journal of Tribology,2004,126(4): 681-689. doi: 10.1115/1.1792674
|
| [2] |
KINGSBURY E P. Torque variations in instrument ball bearings[J]. ASLE Transactions,1965,8(4): 435-441. doi: 10.1080/05698196508972113
|
| [3] |
GUPTA P K. Modeling of instabilities induced by cage clearances in cylindrical roller bearings[J]. Tribology Transactions,1991,34(1): 1-8. doi: 10.1080/10402009108982002
|
| [4] |
GUPTA P K. Cage unbalance and wear in ball bearings[J]. Wear,1991,147(1): 93-104. doi: 10.1016/0043-1648(91)90121-A
|
| [5] |
陈世金, 王瑞祥, 陈晓阳, 等. 不同工况下高速角接触球轴承-刚性转子系统动力学耦合特性分析[J]. 航空动力学报, 2022, 37(2): 344-355.
CHEN Shijin, WANG Ruixiang, CHEN Xiaoyang, et al. Analysis of dynamic coupling characteristics of high speed angular contact ball bearing-rigid rotor system under different working conditions[J]. Journal of Aerospace Power, 2022, 37(2): 344-355. (in Chinese)
|
| [6] |
邓四二,顾金芳,崔永存,等. 高速圆柱滚子轴承保持架动力学特性分析[J]. 航空动力学报,2014,29(1): 207-215. DENG Sier,GU Jinfang,CUI Yongcun,et al. Analysis on dynamic characteristics of cage in high-speed cylindrical roller bearing[J]. Journal of Aerospace Power,2014,29(1): 207-215. (in Chinese doi: 10.13224/j.cnki.jasp.2014.01.027
|
| [7] |
姚廷强,王立华,刘孝保,等. 变工况下角接触球轴承保持架稳定性分析[J]. 振动与冲击,2016,35(18): 172-180. YAO Tingqiang,WANG Lihua,LIU Xiaobao,et al. Dynamic stability analysis on the cage of ball bearing under varying working environment[J]. Journal of Vibration and Shock,2016,35(18): 172-180. (in Chinese doi: 10.13465/j.cnki.jvs.2016.18.028
|
| [8] |
孙雪, 邓四二, 陈国定, 等. 弹性支承下圆柱滚子轴承保持架稳定性分析[J]. 航空动力学报, 2018, 33(2): 487-496.
SUN Xue, DENG Sier, CHEN Guoding, et al. Analysis of cage’s stability in a cylindrical roller bearing with elastic support[J]. Journal of Aerospace Power, 2018, 33(2): 487-496. (in Chinese)
|
| [9] |
LIU Y,CHEN Z,TANG L,et al. Skidding dynamic performance of rolling bearing with cage flexibility under accelerating conditions[J]. Mechanical Systems and Signal Processing,2021,150: 107257.1-107257.21. doi: 10.1016/j.ymssp.2020.107257
|
| [10] |
涂文兵,杨锦雯,罗丫,等. 转速波动工况滚动轴承打滑动力学特性分析[J]. 振动、测试与诊断,2019,38(6): 1193-1198,1294. TU Wenbing,YANG Jinwen,LUO Ya,et al. Skidding dynamic characteristics of rolling bearing under rotational speed fluctuations[J]. Journal of Vibration, Measurement and Diagnosis,2019,38(6): 1193-1198,1294. (in Chinese
|
| [11] |
涂文兵,杨锦雯,罗丫,等. 高速列车轴箱圆柱滚子轴承启动过程的打滑动力学特性[J]. 振动与冲击,2020,39(10): 127-132. TU Wenbing,YANG Jinwen,LUO Ya,et al. Skidding dynamic characteristics of axle box roller bearing of high-speed trains during start-up[J]. Journal of Vibration and Shock,2020,39(10): 127-132. (in Chinese doi: 10.13465/j.cnki.jvs.2020.10.017
|
| [12] |
曹伟,王家序,蒲伟,等. 加速工况下圆柱滚子轴承运动特性[J]. 中南大学学报(自然科学版),2018,49(3): 583-591. CAO Wei,WANG Jiaxu,PU Wei,et al. Kinetic characteristics of cylindrical roller bearing during acceleration[J]. Journal of Central South University (Science and Technology),2018,49(3): 583-591. (in Chinese
|
| [13] |
ZHANG W,DENG S,CHEN G,et al. Influence of lubricant traction coefficient on cage’s nonlinear dynamic behavior in high-Speed cylindrical roller bearing[J]. Journal of Tribology,2017,139(6): 1-11.
|
| [14] |
高帅,韩勤锴,褚福磊. 考虑热流固耦合的角接触滚动轴承动力学特性及打滑状态分析[J]. 机械工程学报,2022,58(9): 87-97. GAO Shuai,HAN Qinkai,CHU Fulei. Analysis of dynamic characteristics and skidding state of angular contact bearing by thermo-hydro-elasto-dynamic coupling model[J]. Journal of Mechanical Engineering,2022,58(9): 87-97. (in Chinese
|
| [15] |
SHI Z,LIU J,LI H,et al. Dynamic simulation of a planet roller bearing considering the cage bridge crack[J]. Engineering Failure Analysis,2022,131: 105849.1-105849.14. doi: 10.1016/j.engfailanal.2021.105849
|
| [16] |
张文虎,胡余生,邓四二,等. 高速圆柱滚子轴承保持架振动特性研究[J]. 振动与冲击,2019,38(22): 85-94. ZHANG Wenhu,HU Yusheng,DENG Sier,et al. Cage vibration behaviors of high-speed cylindrical roller bearings[J]. Journal of Vibration and Shock,2019,38(22): 85-94. (in Chinese doi: 10.13465/j.cnki.jvs.2019.22.012
|
| [17] |
LEBLANC A,NELIAS D,DEFAYE C. Nonlinear dynamic analysis of cylindrical roller bearing with flexible rings[J]. Journal of Sound and Vibration,2009,325(1): 145-160.
|
| [18] |
黄运生, 邓四二, 张文虎, 等. 冲击载荷对铁路轴箱轴承塑料保持架动态性能影响研究. 振动与冲击, 2018, 37(1): 172-180.
HUANG Yunsheng, DENG Sier, ZHANG Wenhu, et al. Influence of impact loads on the dynamic characteristics of plastic cages in railway axle bearings [J]. Journal of Vibration and Shock, 2018, 37(1): 172-180. (in Chinese)
|
| [19] |
CUI Y,DENG S,ZHANG W,et al. The impact of roller dynamic unbalance of high-speed cylindrical roller bearing on the cage nonlinear dynamic characteristics[J]. Mechanism and Machine Theory,2017,118: 65-83. doi: 10.1016/j.mechmachtheory.2017.08.001
|
| [20] |
NIU L,CAO H,HE Z,et al. An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations[J]. Tribology International,2016,103: 12-24. doi: 10.1016/j.triboint.2016.06.026
|
| [21] |
刘延斌,邱明,张占立. 圆弧兜孔圆柱滚子轴承的动态不稳定规律特性研究[J]. 振动与冲击,2019,38(5): 53-59. LIU Yanbin,QIU Ming,ZHANG Zhanli. Dynamic unstable law characteristics of cylindrical roller bearings with arc cage pocket[J]. Journal of Vibration and Shock,2019,38(5): 53-59. (in Chinese doi: 10.13465/j.cnki.jvs.2019.05.008
|
| [22] |
ZHANG X, YAN K, WANG M, et al. Analysis on the influence of guidance mode on the motion characteristics of angular contact ball bearing cage[C]//International Conference on Mechanical Design. Singapore: Springer, 2021: 433-445.
|
| [23] |
涂文兵,梁杰,杨锦雯,等. 变工况下滚动轴承保持架碰撞接触动力学特性分析[J]. 振动与冲击,2022,41(4): 278-286. TU Wenbing,LIANG Jie,YANG Jinwen,et al. Dynamic analysis of impact contact characteristics of the cage of a rolling bearing under variable working conditions[J]. Journal of Sound and Vibration,2022,41(4): 278-286. (in Chinese
|
| [24] |
王云龙,王文中,卿涛,等. 角接触球轴承-转子加减速过程动力学分析[J]. 机械工程学报,2018,54(9): 9-16. WANG Yunlong,WANG Wenzhong,QING Tao,et al. Dynamic analysis of angular contact ball bearing–rotor system during start up and shut down[J]. Journal of Mechanical Engineering,2018,54(9): 9-16. (in Chinese
|
| [25] |
HONG S W,TONG V C. Rolling element bearing modeling: a review[J]. International Journal of Precision Engineering and Manufacturing,2016,17(12): 1729-1749. doi: 10.1007/s12541-016-0200-z
|
| [26] |
GUPTA P K. Transient ball motion and skid in ball bearings[J]. Journal of Lubrication Technology,1975,97(2): 261-269. doi: 10.1115/1.3452568
|
| [27] |
LI Y,CAO H,NIU L,et al. A general method for the dynamic modeling of ball-bearing rotor systems[J]. Journal of Manufacturing Science and Engineering,2015,137(2): 021016.1-021016.12. doi: 10.1115/1.4029312
|
| [28] |
QIAN W. Dynamic simulation of cylindrical roller bearings[D]. Aachen, Germany: RWTH Aachen University, 2014.
|
DownLoad:
