| Citation: | ZHU Jianqin, LI Dike, TAO Zhi, et al. Predicting method of film cooling effectiveness distribution based on constrained neural network[J]. Journal of Aerospace Power, 2023, 38（7）：1537-1545 doi: 10.13224/j.cnki.jasp.20220685
|
To improve the design efficiency of film cooling in turbine vane, a neural network constrained by Gaussian function was proposed to predict the cooling effectiveness distribution of single film row, and the distribution of multi film rows was predicted by combining the modified superposition principle. For a single film row on the flat-plate, three coefficients of the Gaussian function were predicted with the main flow turbulence degree, density ratio, blowing ratio, film inclined angle, length-width ratio and dimensionless flow direction distance taken as inputs, and then the dimensionless lateral distance was substituted into the predicted Gaussian function to calculate the cooling effectiveness. The prediction error of the Gauss function constrained neural network for the average cooling effectiveness of the test samples was only 5.70%, which was 67% lower than that of network without constraints. Based on the model of single film row and the correction coefficient of multi film rows superposition principle predicted according to the blowing ratio and dimensionless coordinates, the cooling effectiveness distribution of multi film rows was calculated. The prediction errors of the average cooling effectiveness were only 6.19% and 12.19% with the blowing ratio at 0.5 and 1, respectively. According to the results, the proposed method can predict the film cooling effectiveness distribution accurately.
| [1] |
JOHNSON B,TIAN Wei,ZHANG Kai,et al. An experimental study of density ratio effects on the film cooling injection from discrete holes by using PIV and PSP techniques[J]. International Journal of Heat and Mass Transfer,2014,76: 337-349. doi: 10.1016/j.ijheatmasstransfer.2014.04.028
|
| [2] |
WU P S,TSAI S T,JHUO Y H,et al. Effect of turbulence intensity on cross-injection film cooling at a stepped or smooth endwall of a gas turbine vane passage[J]. The Scientific World Journal,2014,2014: 256136.1-256136.13.
|
| [3] |
刘高文,刘松龄. 喷射角对涡轮叶栅端壁气膜冷却传热的影响[J]. 推进技术,2002,23(6): 496-499. doi: 10.3321/j.issn:1001-4055.2002.06.015
LIU Gaowen,LIU Songling. Effect of injection angle on film cooling heat transfer of turbine cascade endwall[J]. Journal of Propulsion Technology,2002,23(6): 496-499. (in Chinese) doi: 10.3321/j.issn:1001-4055.2002.06.015
|
| [4] |
GHORAB M G,HASSAN I G,LUCAS T. An experimental investigation of film cooling performance of louver scheme[J]. Journal of Heat and Mass Transfer,2011,54: 1387-1399. doi: 10.1016/j.ijheatmasstransfer.2010.12.002
|
| [5] |
曹玉璋. 航空发动机传热学[M]. 北京: 北京航空航天大学出版社, 2005.
|
| [6] |
葛绍岩. 气膜冷却[M]. 北京: 科学出版社, 1985.
|
| [7] |
BALDAUF S, SCHEURLEN M, SCHULZ A, et al. Correlation of film cooling effectiveness from thermographic measurements at engine like conditions[R]. ASME GT2002-30180, 2002.
|
| [8] |
WALTERS D K. A systematic computational methodology applied to a three-dimensional film-cooling flow field[J]. Journal of Turbomachinery,1997,119(4): 777-785. doi: 10.1115/1.2841188
|
| [9] |
LI Xueying, REN Jing, JIANG Hongde. Algebraic anisotropic eddy-viscosity modeling for application to turbulent film cooling flows[R]. ASME GT2011-45791, 2011.
|
| [10] |
NAGHASHNEJAD M,AMANIFARD N,DEYLAMI H M. A predictive model based on a 3-D computational approach for film cooling effectiveness over a flat plate using GMDH-type neural networks[J]. Heat and Mass Transfer,2014,50(1): 139-149. doi: 10.1007/s00231-013-1239-3
|
| [11] |
DOLATI S,AMANIFARD N,DEYLAMI H M. Numerical study and GMDH-type neural networks modeling of plasma actuator effects on the film cooling over a flat plate[J]. Applied Thermal Engineering,2017,123: 734-745. doi: 10.1016/j.applthermaleng.2017.05.149
|
| [12] |
DAVALOS J O,GARCIA J C,URQUIZA G,et al. Prediction of film cooling effectiveness on a gas turbine blade leading edge using ANN and CFD[J]. International Journal of Turbo and Jet-Engines,2018,35(2): 101-111.
|
| [13] |
秦晏旻,李雪英,任静,等. 基于BP神经网络的多参数气膜冷却效率研究[J]. 工程热物理学报,2011,32(7): 1127-1130.
QIN Yanwen,LI Xueying,REN Jing,et al. Research on multi parameter film cooling effectiveness based on BP neural network[J]. Journal of Engineering Thermophysics,2011,32(7): 1127-1130. (in Chinese)
|
| [14] |
LEE K D,CHOI D W,KIM K Y. Optimization of ejection angles of double-jet film-cooling holes using RBNN model[J]. International Journal of Thermal Sciences,2013,73: 69-78. doi: 10.1016/j.ijthermalsci.2013.05.015
|
| [15] |
WANG Chunhua,ZHANG Jingzhou,ZHOU Junhui. Optimization of a fan-shaped hole to improve film cooling performance by RBF neural network and genetic algorithm[J]. Aerospace Science and Technology,2016,58: 18-25. doi: 10.1016/j.ast.2016.08.004
|
| [16] |
HUANG Ying,ZHANG Jingzhou,WANG Chunhua. Shape-optimization of round-to-slot holes for improving film cooling effectiveness on a flat surface[J]. Heat and Mass Transfer,2018,54: 1741-1754. doi: 10.1007/s00231-017-2272-4
|
| [17] |
CAROLE E A,WAHID G,IBRAHIM H. Aerothermal optimization and experimental verification for discrete turbine airfoil film cooling[J]. Journal of Propulsion and Power,2015,31(2): 543-558. doi: 10.2514/1.B35235
|
| [18] |
WANG Chunhua,SUN Xiaokai,ZHANG Jingzhou. Uncertainty analysis of trench film cooling on flat plate[J]. Applied Thermal Engineering,2019,156: 562-575. doi: 10.1016/j.applthermaleng.2019.04.099
|
| [19] |
SINHA A K,BOGARD D G,CRAWFORD M E,et al. Film-cooling effectiveness downstream of a single row of holes with variable density ratio[J]. Journal of Turbomachinery,1991,113(3): 442-449. doi: 10.1115/1.2927894
|
DownLoad:
