| Citation: | JIANG Kanghe, YAN Lin, CHEN Jingwei, et al. Effect of geometric parameters on fretting fatigue life of turbine attachment: test[J]. Journal of Aerospace Power, 2023, 38（6）：1474-1480 doi: 10.13224/j.cnki.jasp.20230090
|
Test and simulation studies were conducted to investigate the fretting fatigue behaviour and damage characterization of turbine attachment. Seven types of turbine attachment with different pressure angles, tooth angles, and tooth spacing were designed, and fatigue tests were carried out under high and low cycle loads. The second tooth of the tenon of all types suffered fretting fatigue failure. And the effect of the geometric parameters of the tenon on fretting fatigue was obtained: with the increase of pressure angle and tooth pitch, the fretting fatigue life gradually decreased; while with the increase of tooth shape angle, the fretting fatigue life was first kept basically the same, and then increased significantly. Critical evidence was provided to reveal the failure mechanism under combined high and low cycle loads, meanwhile important data were generated for determining the controlling parameter and validating the established model of the fretting fatigue for turbine tenons.
| [1] |
WANG R Q,WEI J M,HU D Y,et al. Investigation on experimental load spectrum for high and low cycle combined fatigue test[J]. Propulsion and Power Research,2013,2(4): 235-242. doi: 10.1016/j.jppr.2013.11.004
|
| [2] |
RAYKOWSKI A,HADER M. Blast cleaning of gas turbine components: deposit removal and substrate deformation[J]. Wear,2001,249(1): 126-131.
|
| [3] |
XIE M L,ZHONG P D. Analysis of fracture failure of fir-tree serrations of stage Ⅱ: turbine disks[J]. Engineering Failure Analysis,2000,7(4): 249-260. doi: 10.1016/S1350-6307(99)00022-9
|
| [4] |
陈光. 航空燃气涡轮发动机结构设计[M]. 北京: 北京航空航天大学出版社, 1994.
|
| [5] |
郑旭东,蔚夺魁,王兆丰,等. 某型航空发动机涡轮叶片和轮盘榫齿裂纹故障力学分析[J]. 航空发动机,2005,31(3): 35-38. doi: 10.3969/j.issn.1672-3147.2005.03.009
ZHENG Xudong,YU Duokui,WANG Zhaofeng,et al. Mechanical analysis of crack failures in turbine blade and disk serration of an aeroengine[J]. Aeroengine,2005,31(3): 35-38. (in Chinese) doi: 10.3969/j.issn.1672-3147.2005.03.009
|
| [6] |
古远兴. 高低周复合载荷下燕尾榫结构微动疲劳寿命研究[D]. 南京: 南京航空航天大学, 2007.
GU Yuanxing. Research on fretting fatigue life of dovetail joint under HCF-LCF load[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007. (in Chinese)
|
| [7] |
姚华兴,闫沙林. 航空发动机涡轮盘榫齿裂纹故障研究[J]. 航空动力学报,1991,6(1): 51-53.
YAO Huaxing,YAN Shalin. A research on cracked failures of Fir-tree serration in aeroengine turbine disc[J]. Journal of Aerospace Power,1991,6(1): 51-53. (in Chinese)
|
| [8] |
宋兆泓. 航空发动机典型故障分析[M]. 北京: 北京航空航天大学出版社, 1993.
|
| [9] |
魏大盛,王延荣. 榫连结构接触面几何构形对接触区应力分布的影响[J]. 航空动力学报,2010,25(2): 407-411. doi: 10.13224/j.cnki.jasp.2010.02.010
WEI Dasheng,WANG Yanrong. Effects of profile of contact surfaces on the stress distribution for tenon jointing in blade disk assesmblies[J]. Jounal of Aerospace Power,2010,25(2): 407-411. (in Chinese) doi: 10.13224/j.cnki.jasp.2010.02.010
|
| [10] |
UCHINO K, KAMIYAMA T, INAMURU T, et al. Three-dimensional photoelastic analysis of aeroengine rotary parts [C]//Proceedings of International Symposiumon Photoelasticity. New York: Springer, 1986: 209-214.
|
| [11] |
张野,申秀丽. 榫接结构接触面几何形式对接触应力的影响[J]. 航空动力学报,2016,31(12): 2949-2956. doi: 10.13224/j.cnki.jasp.2016.12.017
ZHANG Ye,SHEN Xiuli. Influence of tenon structure contact surface geometry on contact stress[J]. Journal of Aerospace Power,2016,31(12): 2949-2956. (in Chinese) doi: 10.13224/j.cnki.jasp.2016.12.017
|
| [12] |
MEGUID S A,KANTH P S,CZEKANSKI A. Finite element analysis of fir-tree region in turbine discs[J]. Finite Elements in Analysis and Design,2000,35(4): 305-317. doi: 10.1016/S0168-874X(99)00072-4
|
| [13] |
CHAN S K,TUBA I S. A finite element method for contact problems of solid bodies: Part Ⅱ application to turbine blade fastenings[J]. International Journal of Mechanical Science,1971,13(7): 627-639. doi: 10.1016/0020-7403(71)90033-6
|
| [14] |
ZBOINSKI G. Physical and geometrical non-linearities in contact problems of elastic blade attachments[J]. Mechanics Engineering Science,1995,209(4): 273-286. doi: 10.1243/PIME_PROC_1995_209_154_02
|
| [15] |
ZBOINSKI G. Finite element computer program for incremental analysis of large three dimensional fractional contact problems of linear elasticity[J]. Computer Structure,1993,46(4): 679-687. doi: 10.1016/0045-7949(93)90396-U
|
| [16] |
SINCLAIR G B,CORMIER N G. Contact stresses in dovetail attachments: alleviation via precision crowning[J]. Journal of Engineering for Gas Turbines and Power,2003,125(4): 1033-1041. doi: 10.1115/1.1584477
|
| [17] |
SINCLAIR G B,CORMIER N G,GRIFFIN J H,et al. Contact stresses in dovetail attachments: finite element modeling[J]. Journal of Engineering for Gas Turbines and Power,2002,124(1): 182-189. doi: 10.1115/1.1391429
|
| [18] |
SINCLAIR G B,CORMIER N G. Contact stresses in dovetail attachments: physical modeling[J]. Journal of Engineering for Gas Turbines and Power,2002,124(2): 325-331. doi: 10.1115/1.1415740
|
| [19] |
中国航空工业总公司. 材料疲劳试验统计分析方法: HB/Z112-1986[S]. 北京: 航空工业出版社, 1986: 1-50.
|
DownLoad:
