Volume 40 Issue 6
Jun.  2025
Turn off MathJax
Article Contents
LI Na, YAN Xu, CHEN Xuheng, et al. Efficient prediction of heat transfer characteristics of compact heat exchangers[J]. Journal of Aerospace Power, 2025, 40(6):20230811 doi: 10.13224/j.cnki.jasp.20230811
Citation: LI Na, YAN Xu, CHEN Xuheng, et al. Efficient prediction of heat transfer characteristics of compact heat exchangers[J]. Journal of Aerospace Power, 2025, 40(6):20230811 doi: 10.13224/j.cnki.jasp.20230811

Efficient prediction of heat transfer characteristics of compact heat exchangers

doi: 10.13224/j.cnki.jasp.20230811
  • Received Date: 2023-12-22
    Available Online: 2024-08-29
  • The research focused on the flow heat transfer characteristics and efficient calculation methods in compact heat exchangers. To achieve the research objectives, a fast calculation method for the temperature distribution of a compact heat exchanger based on the porous media theory was established. The heat transfer models of the staggered tube bundle of the pre-cooler configuration for the reference ATREX engine and the involute spiral tube bundle pre-cooler configuration for the SABRE engine were analyzed for performance, respectively. The corresponding methodology and procedure for rapid calculation of heat transfer performance were established. The results showed that the prediction results were consistent with the FLUENT 3D tube bundle model simulation results but the time consumed was less than 1% of CFD simulation. The advantages of the fast prediction method in terms of calculation cost and speed were demonstrated.

     

  • loading
  • [1]
    VARVILL R,BOND A. A comparison of propulsion concepts for SSTO reusable launchers[J]. Journal of the British Interplanetary Society,2003,56: 108-117.
    [2]
    TANATSUGU N,SATO T,BALEPIN V,et al. Development study on ATREX engine[R]. AIAA 1996-4553,1996.
    [3]
    TANATSUGU N,SATO T,BALEPIN V. Development study on ATREX engine[J]. Acta Astronautica,1997,40(2): 165-170.
    [4]
    VARVILL R,BOND A. The skylon spaceplane: progress to realisation[J]. Journal of the British Interplanetary Society,2008,46: 412-418.
    [5]
    邹正平,刘火星,唐海龙,等. 高超声速航空发动机强预冷技术研究[J]. 航空学报,2015,36(8): 2544-2562. ZOU Zhengping,LIU Huoxing,TANG Hailong,et al. Precooling technology study of hypersonic aeroengine[J]. Acta Aeronautica et Astronautica Sinica,2015,36(8): 2544-2562. (in Chinese

    ZOU Zhengping, LIU Huoxing, TANG Hailong, et al. Precooling technology study of hypersonic aeroengine[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(8): 2544-2562. (in Chinese)
    [6]
    邹正平,王一帆,额日其太,等. 高超声速强预冷航空发动机技术研究进展[J]. 航空发动机,2021,47(4): 8-21. ZOU Zhengping,WANG Yifan,Eriqitai,et al. Research progress on hypersonic precooled airbreathing engine technology[J]. Aeroengine,2021,47(4): 8-21. (in Chinese

    ZOU Zhengping, WANG Yifan, Eriqitai, et al. Research progress on hypersonic precooled airbreathing engine technology[J]. Aeroengine, 2021, 47(4): 8-21. (in Chinese)
    [7]
    MA H B,PETERSON G P. Pressure drop and heat transfer of laminar flow in a microchannel heat sink[J]. International Journal of Heat and Mass Transfer,1996,39(5): 939-945.
    [8]
    HETSRONI G,MOSYAK A,SEGAL Z. Thermal-hydraulic aspects of high heat flux cooling with minichannel and microchannel[J]. Heat Transfer Engineering,2005,26(6): 5-14.
    [9]
    MURRAY J J,GUHA A,BOND A. Overview of the development of heat exchangers for use in air-breathing propulsion pre-coolers[J]. Acta Astronautica,1997,41(11): 723-729. doi: 10.1016/S0094-5765(97)00199-9
    [10]
    BOND A,YAN J. Development of CFD methods for the analysis of SABRE engine intakes and combustion chambers[J]. Proceedings of the Institution of Mechanical Engineers: Part G Journal of Aerospace Engineering,2013,227(4): 598-615.
    [11]
    CUI X,CHUA K J,ISLAM M R,et al. Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers[J]. Energy Conversion and Management,2014,88: 372-381. doi: 10.1016/j.enconman.2014.08.056
    [12]
    GARCÍA J M,PONCE J M,SERNA M. A hybrid methodology for detailed heat exchanger design in the optimal synthesis of heat exchanger networks[J]. Computer Aided Chemical Engineering,2006,21: 979-984.
    [13]
    HENDRICK P,HEINTZ N,BIZZARRI D,et al. Air-hydrogen heat exchangers for advanced space launchers[J]. Journal of Propulsion and Power,2009,25(6): 1211-1219. doi: 10.2514/1.41780
    [14]
    NAVARRO H A,CABEZAS-GÓMEZ L,ZOGHBI FILHO J R B,et al. Effectiveness-NTU data and analysis for air conditioning and refrigeration air coils[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2010,32(3): 218-226. doi: 10.1590/S1678-58782010000300004
    [15]
    YU Xuanfei,WANG Cong,YU Daren. Precooler-design & engine-performance conjugated optimization for fuel direct precooled airbreathing propulsion[J]. Energy,2019,170: 546-556. doi: 10.1016/j.energy.2018.12.192
    [16]
    ZHANG Jianqiang,WANG Zhenguo,LI Qinglian. Thermodynamic efficiency analysis and cycle optimization of deeply precooled combined cycle engine in the air-breathing mode[J]. Acta Astronautica,2017,138: 394-406. doi: 10.1016/j.actaastro.2017.06.011
    [17]
    罗佳茂,杨顺华,张建强,等. 换热预冷发动机预冷特性和发动机性能数值研究[J]. 航空学报,2019,40(5): 106-118. LUO Jiamao,YANG Shunhua,ZHANG Jianqiang,et al. Numerical investigation of pre-cooling characteristics of heat exchange pre-cooling engine and engine performance[J]. Acta Aeronautica et Astronautica Sinica,2019,40(5): 106-118. (in Chinese

    LUO Jiamao, YANG Shunhua, ZHANG Jianqiang, et al. Numerical investigation of pre-cooling characteristics of heat exchange pre-cooling engine and engine performance[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(5): 106-118. (in Chinese)
    [18]
    MISSIRLIS D,YAKINTHOS K,PALIKARAS A,et al. Experimental and numerical investigation of the flow field through a heat exchanger for aero-engine applications[J]. International Journal of Heat and Fluid Flow,2005,26(3): 440-458. doi: 10.1016/j.ijheatfluidflow.2004.10.003
    [19]
    MORENO R R,PÉREZ A M,PÉREZ R B. Numerical optimization of a heat exchanger with slit fins and vortex generators using genetic algorithms[J]. International Journal of Refrigeration,2020,119: 247-256. doi: 10.1016/j.ijrefrig.2020.07.023
    [20]
    XIE Jingzhe,LI Shulei,YAN Hongbin,et al. Numerical analysis on thermal-hydraulic performances of staggered tube bundles for an aero-engine compact precooler[J]. Journal of Thermal Analysis and Calorimetry,2020,141(1): 387-399. doi: 10.1007/s10973-020-09672-1
    [21]
    KIM S J,KIM D,LEE D Y. On the local thermal equilibrium in microchannel heat sinks[J]. International Journal of Heat and Mass Transfer,2000,43(10): 1735-1748. doi: 10.1016/S0017-9310(99)00259-8
    [22]
    MAHMOUDI Y. Constant wall heat flux boundary condition in micro-channels filled with a porous medium with internal heat generation under local thermal non-equilibrium condition[J]. International Journal of Heat and Mass Transfer,2015,85: 524-542. doi: 10.1016/j.ijheatmasstransfer.2015.01.134
    [23]
    YANG Kun,VAFAI K. Analysis of temperature gradient bifurcation in porous media-an exact solution[J]. International Journal of Heat and Mass Transfer,2010,53(19/20): 4316-4325.
    [24]
    吕多,陆海鹰,周建军,等. 临近空间飞行器推进系统预冷器关键技术[J]. 航空学报,2016,37(增刊1): 119-126. LYU Duo,LU Haiying,et al. Key technology for pre-cooler in near space vehicle propulsion system[J]. Acta Aeronautica et Astronautica Sinica,2016,37(Suppl.1): 119-126. (in Chinese

    LYU Duo, LU Haiying, et al. Key technology for pre-cooler in near space vehicle propulsion system[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(Suppl.1): 119-126. (in Chinese)
    [25]
    LI Hui,ZOU Zhengping,LIU Yumin. A refined design method for precoolers with consideration of multi-parameter variations based on low-dimensional analysis[J]. Chinese Journal of Aeronautics,2022,35(3): 329-344. doi: 10.1016/j.cja.2021.08.031
    [26]
    高远,陈玉春,史新兴. SABRE预冷器计算模型及其在整机模型中的应用[J]. 推进技术,2021,42(11): 2485-2493. GAO Yuan,CHEN Yuchun,SHI Xinxing. SABRE precooler calculation model and its application in engine model[J]. Journal of Propulsion Technology,2021,42(11): 2485-2493. (in Chinese

    GAO Yuan, CHEN Yuchun, SHI Xinxing. SABRE precooler calculation model and its application in engine model[J]. Journal of Propulsion Technology, 2021, 42(11): 2485-2493. (in Chinese)
    [27]
    MURRAY J J,HEMPSELL C M,BOND A. An experimental precooler for airbeathing rocket engines[J]. Journal of the British Interplanetary Scoiety,2001,5: 199-209.
    [28]
    魏鑫,金峰,刘天依,等. SABRE空气预冷器流动与换热数值研究[J]. 火箭推进,2019,45(5): 8-16. WEI Xin,JIN Feng,LIU Tianyi,et al. Numerical study on flow and heat transfer of air precooler in SABRE[J]. Journal of Rocket Propulsion,2019,45(5): 8-16. (in Chinese

    WEI Xin, JIN Feng, LIU Tianyi, et al. Numerical study on flow and heat transfer of air precooler in SABRE[J]. Journal of Rocket Propulsion, 2019, 45(5): 8-16. (in Chinese)
    [29]
    DYBBS A,EDWARDS R V. A new look at porous media fluid mechanics: darcy to turbulent[M]//BEAR J,CORAPCIOGLU M Y. Fundamentals of Transport Phenomena in Porous Media. Dordre-cht,Holland: Springer,1984: 199-256.
    [30]
    HALL M J,HIATT J P. Measurements of pore scale flows within and exiting ceramic foams[J]. Experiments in Fluids,1996,20(6): 433-440. doi: 10.1007/BF00189382
    [31]
    SEGUIN D,MONTILLET A,COMITI J,HUET F. Experimental characterization of flow regimes in various porous media: Ⅱ transition to turbulent regime[J]. Chemical Engineering Science,1998,53(22): 3897-3909.
    [32]
    TIEN C L,KUO S M. Analysis of forced convection in microstructures for electronic system cooling[J]. Cooling Technology for Electronic Equipment,1987: 217-226.
    [33]
    CHEN Xuheng,LI Na,ZHOU Xin,et al. Prediction of heat transfer for compact tube heat exchanger based on porous models[J]. Journal of Thermal Science and Engineering Applications,2024,16(3): 031002. doi: 10.1115/1.4064169
    [34]
    罗佳茂,游进,焦思,等. 甲烷预冷器三维换热特性数值研究[J]. 航空动力学报,2024,39(8): 20220603. LUO Jiamao,YOU Jin,JIAO Si,et al. Numerical study on heat exchange performance for three-dimensional methane pre-cooler[J]. Journal of Aerospace Power,2024,39(8): 20220603. (in Chinese

    LUO Jiamao, YOU Jin, JIAO Si, et al. Numerical study on heat exchange performance for three-dimensional methane pre-cooler[J]. Journal of Aerospace Power, 2024, 39(8): 20220603. (in Chinese)
    [35]
    SATO T,TANATSUGU N,NARUO Y,et al. Development study on ATREX engine for future spaceplane[R]. AIAA-1996-4553,1996.
    [36]
    魏鑫. 吸气预冷发动机热力循环及预冷器传热特性研究[D]. 南京: 南京航空航天大学,2019. WEI Xin. Study on thermodynamic cycle of air-breathing precooling engine and heat transfer characteristics of precooler[D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2019. (in Chinese

    WEI Xin. Study on thermodynamic cycle of air-breathing precooling engine and heat transfer characteristics of precooler[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2019. (in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (513) PDF downloads(79) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return