| Citation: | WU Yan-hui, CHU Wu-li, LIU Zhi-wei. Influence of Moving End-Wall on Tip Clearance Flow in an Axial-Flow Compressor Cascade[J]. Journal of Aerospace Power, 2006, 21(1): 112-118.
|
| [1] |
Inoue M,Kuroumaru M.Structure of Tip Clearance Flow in an Isolated Axial Flow Compressor Rotor[J].ASME Journal of Turbomachinery,1989,111 (2) ; 250～256.
|
| [2] |
Inoue M,Kuroumaru M.Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor[J].ASME Journal of Engineering for Gas Turbine and Power,1986,108 (1); 7 ～ 14.
|
| [3] |
Kunz R F,et al.Investigation of Tip Clearance Phenomena in an Axial Flow Compressor Cascade Using Euler and NavierStokes Procedures[J].AS M E Journal of Turbomachinery,1993,115;453～467.
|
| [4] |
Kang S,Hirsch C.Numerical Simulation of Three Dimensional Viscous Flow in a Linear Compressor Cascade with Tip Clearance[J].ASME Journal of Turbomachinery,1996,118;492～503.
|
| [5] |
Yaras M I,Sjolander S A.Effects of Simulated Rotation on Tip Leakage Flow in a Planar Cascade of Turbine Blades; Part I -Tip Gap Flow[J].ASME Journal of Turbomachinery,1992,114 (3) ;652～659.
|
| [6] |
Yaras M I,Sjolander S A.Effects of Simulated Rotation on Tip Leakage in a Planar Cascade of Turbine Blades; Part Ⅱ -Downstream Flow Field and Blade Loading[J].ASME Journal of Turbomachinery,1992,114; 660 ～ 667.
|
| [7] |
Peter L J.Influence of a Moving End Wall on the Tip Clearance Vortex in an Axial Compressor Cascade[R].AFIT/GAE/ ENY /95D-19,1995.
|
| [8] |
Mcmullan R J.Influence of Tip Clearance on the Flow Field in a Compressor Cascade with a Moving Endwall[R].AFIT/GAE/ ENY /96D-5,1996.
|
| [9] |
王正明,贾希诚,王嘉伟.不同间隙条件下的叶顶区流动[J].工程热物理学报,2003,24(2);228～230.Jia Xicheng,Wang Zhengming,Wang Jiawei.The Flow in Blade Tip Region under Different Clearance Conditions[J].Journal of Engineering Thermophysics,2003,24 (2); 228 ～230.
|
| [10] |
贾希诚,王正明,王嘉伟.叶轮机械中的泄漏流动与泄漏涡[J].工程热物理学报,2003,24(5);753～756.Jia Xicheng,Wang Zhengming,Wang Jiawei.Leakage Flow and Leakage Vortex in Turbomachinery[J].Journal of Engineering Thermophysics,2003,24 (5) ;753～756.
|
| [11] |
邓向阳,张宏武.叶顶间隙大小和壁面相对运动对低速轴流压气机孤立转子性能的影响[J].工程热物理学报,2004,25(5);773～775.Deng Xangyang,Zhang Yongwu.The Effect of Tip Clearance Gap Size and Wall Rotation on the Performance of a Low-Speed Axial Compressor Rotor[J].Journal of Engineering Thermophysics,2004,25 (5); 753～756.
|
DownLoad: