| Citation: | YAN Pei-gang, WANG Song-tao, FENG Guo-tai. Numerical Simulation of the Influence of Bowed Blade on the Performance of Turbine Cascade with Film-Cooling[J]. Journal of Aerospace Power, 2006, 21(2): 261-267.
|
| [1] |
Chernobrovkin A,Lakshminarayana B.Numerical Simulation and Aero-Thermal Physics of Leading Edge Film Cooling[R].ASME Paper 98-GT-504.,Stockholm,1998.
|
| [2] |
Dennis B H,Egorov I N,George S.Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade[R].ASME Paper 2003-GT-38051.,Atlanta,2003.
|
| [3] |
Salcudean M,Garshore I,Zhang K.An Experimental Study of Film Cooling Effectiveness Near the Leading Edge of a Turbine Blade[J].ASME Journal of Turbomachinery,1994,116(1):71～79.
|
| [4] |
王仲奇,苏杰先,钟兢军.弯曲叶片栅内减少能量损失机理研究的新进展[J].工程热物理学报,1994,15(2):147～152.Wang Zhongqi,Su Jiexian,Zhong jingjun.New Development of Research on Energy Loss Reduction in Bowed Blade Cas cade[J].Journal of Engineering Thermoph ysics,1994,15(2):147～152.
|
| [5] |
王松涛.叶轮机三维粘性流场数值方法与弯叶片内涡系结构的研究[D].黑龙江:哈尔滨工业大学,1999.
|
| [6] |
Demuren O,Ibraheen S O.Multigrid Method for the Euler and Navier-Stokes Equations[J].AIAA Journal,1998,36(1):31～37.
|
| [7] |
施法中.计算机辅助几何设计与非均匀有理B样条[M].北京:北京航空航天大学出版社,1 994:30～121.
|
| [8] |
王松涛,颜培刚,孙玺淼,等.涡轮叶栅冷气掺混数值模拟方法[J].航空动力学报,2003,18(4):558～562.Wang Songtao,Yan Peigang,Sun Ximiao,et al.Numerical Method for Coolant Mixing in Turbine Cascade Flow Field[J].Journal of Aerospace Power,2 00 3,18 (4):558～562.
|
| [9] |
Friendrichs S,Hodson H P,Dawes W N.The Design of Improved Endwall Film-Cooling[J].Transactions of ASME 1997,119(5):788～793.
|
| [10] |
Oke R,Simon T,Shih T.Measurements Over a FilmCooled,Contoured Endwall With Various Coolant Injection Rates[R].ASME Paper 2001-GT-0140.,New Orleans.
|
DownLoad: