| Citation: | LI Shao-bin, SU Jie-xian, WANG Zhong-qi. Redesign of a transonic compressor stage using highly loaded bowed stator[J]. Journal of Aerospace Power, 2006, 21(4): 741-746.
|
| [1] |
陈懋章.风扇/压气机技术发展和对今后工作的建议[J].航空动力学报,2002,17(1):1-15.CHEN Maozhang.Development of fan/compressor techniques and suggestions on further researches[J].Journal of Aerospace Power,2002,17(1):1-15.
|
| [2] |
Bryce J D,Cherrett M A,Lyes P A.Three-dimensional flow in a highly loaded single-stage transonic fan[J].ASME Journal of Turbomachinery,1995,117:22-28.
|
| [3] |
Emmerson P R.Three-dimensional flow calculations of the stator in a highly loaded transonic fan[R].ASME Paper 96-GT-546,Birmingham:1996.
|
| [4] |
Calvert W J,Emmerson P R,Moore J M.Design,test and analysis of a high-pressure-ratio transonic fan[R].ASME Paper GT2003-38302,Atlanta:2003.
|
| [5] |
Friedrichs J,Baumgarten S,Kosyna G,et al.Effect of stator design on stator boundary layer flow in a highly loaded single-stage axial-flow low-speed compressor[R].ASME Paper 2000-GT-0616,Munich:2000.
|
| [6] |
Boese M,Fottner L.Effects of riblets on the loss behavior of a highly loaded compressor cascade[R].ASME Paper GT-2002-30438,Amsterdam:2002.
|
| [7] |
Douglas J W,Li S M,Song B,et al.Effects of freestream turbulence on the losses of a highly loaded compressor stator blade[R].ASME Paper GT2003-38604,Atlanta:2003.
|
| [8] |
Hilgenfeld L,Pfitzner M.Unsteady boundary layer development due to wake passing effects on a highly loaded linear compressor cascade[R].ASME Paper GT2004-53186,Vienna:2004.
|
| [9] |
刘宝杰,邹正平,严明,等.叶轮机计算流体动力学技术现状与发展趋势[J].航空学报,2002,23(5):394-404.LIU Baojie,ZOU Zhengping,YAN Ming,et al.Present status and future development of CFD in turbomachinery[J].Acta Aeronautica et Astronautica Sinica,2002,23(5):394-404.
|
| [10] |
Bogod A B.Direct and inverted calculation of 2D axisymmetric and 3D flows in axial compressor blade rows[R].TsAGI,Russia:1992.
|
| [11] |
Weingold H D.Reduction of compressor stator endwall losses through the use of bowed stators[R].ASME Paper 95-GT-380,1995.
|
| [12] |
Fischer A,Riess W,Seume J R.Performance of strongly bowed stators in a 4-stage high speed compressor[R].ASME Paper GT2003-38392,2003.
|
| [13] |
Wellborn S R,Delaney R A.Redesign of a 12-stage axial-flow compressor using multistage CFD[R].ASME Paper 2001-GT-0351,2001.
|
| [14] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading,Part Ⅰ:University research and methods development[R].ASME Paper GT-2002-30328,2002.
|
| [15] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading,Part Ⅱ:Low and high speed designs and test verification[R].ASME Paper GT-2002-30329,2002.
|
| [16] |
Breugelmans F A E.Influence of dihedral on the secondary flow in a two-dimensional compressor cascade[J].ASME Journal of Engineering for Gas Turbine and Power,1984,106(3):578-584.
|
| [17] |
Brilliant L,Balamucki S,Burger G,et al.Application of multistage CFD analysis to low pressure compressor design[R].ASME Paper GT2004-54263,2004.
|
| [18] |
李绍斌,苏杰先,冯国泰,等.弯曲及局部修型对大折转角扩压叶栅性能的影响(论文编号:052043)[A].第十一届热机气动热力学年会论文集[C].中国工程热物理学会,北京:2005.
|
DownLoad: