| Citation: | SUN Jian, CHI Ke-wei, FENG Mao-lin, ZHANG Wen-ming. Performance analysis of special cross section rubber seal ring[J]. Journal of Aerospace Power, 2007, 22(1): 30-36.
|
| [1] |
(德)海因茨 K 米勒,(英)伯纳德 S 纳乌著.流体密封技术[M].北京:机械工业出版社,2002.
|
| [2] |
顾永泉.流体动密封(下)[M].北京:中国石化出版社,1992.
|
| [3] |
吕和祥.橡皮轴对称大变形分析[J].大连工学院学报,1984,23(1):17-23.LU Hexiang.Analysis of axisymmetric large deformation of rubber[J].Journal of Dalian Institute of Technology,1984,23(1):17-23
|
| [4] |
吕和祥.橡皮环大变形接触问题[J].应用数学和力学,1986,7(3):239-248.LU Hexiang.Contact problem of rubber rings with large deformation[J].Applied Mathematics and Mechanics.1986,7(3):239-248.
|
| [5] |
廖日东,左正兴,邹文胜.O 形圈轴对称超弹性接触问题的有限元分析[J].润滑与密封,1996(5):30-33.LIAO Ridong,ZUO Zhengxing,ZOU Wensheng.Finit element analysis of the axial symmetric hyperelastic contact problem of O ring[J].Lubrication Engineering.1996(5):30-33.
|
| [6] |
任全彬,陈汝训,杨卫国.橡胶O形圈的变形及应力分析[J].航空动力学报,1995,10(3):241-244REN Quanbin,CHEN Ruxun,YANG Weiguo.Deformation and stress analysis of rubber O-ring[J].Journal of Aerospace Power.1995,10(3):241-24.
|
| [7] |
Salita M.A simple finite element model of o-ring deformation and activation during squeeze and pressurization[R].Paper AIAA-87-1739.American Institute of aeronautics and astronautics,1987.
|
| [8] |
Gadia M S.Alternative methods for the solution of hyperelastic problems with incompressibility[J].Computer and Structures,1992,42(1):1-10.
|
| [9] |
蒋友谅.非线性有限元法[M].北京:北京工业学院出版社,1988.
|
| [10] |
ANSYS理论手册[M].美国ANSYS公司,2002.
|
| [11] |
王勖成,邵敏.有限单元法基本原理和数值方法[M].北京:清华大学出版社,1997.
|
| [12] |
巴斯.工程分析中的有限元法[M].北京:机械工业出版社,1991.
|
DownLoad: