| Citation: | ZHAO Meng-meng, ZHANG Chi, LIN Yu-zhen, LIU. Study of overall cooling effectiveness of discrete holes with different angles to concave wall[J]. Journal of Aerospace Power, 2007, 22(2): 210-215.
|
| [1] |
Eriksen V L,Glodstein R J.Heat transfer and film cooling fooling injection through inclined circular tubes[R].ASME Paper 74-HT-V-1974.
|
| [2] |
方韧,李彬,林宇震,等.多斜孔壁气膜冷却绝热温比传热传质类比实验研究[J].航空动力学报,1998,13(1):65-68.FANG Ren,LI Bin,LIN Yuzhen,et al.An experimental investigation of adiabatic effectiveness of inclined multihole wall full-coverage film cooling with heat-mass transfer analogy method[J].Journal of Aerospace Power,1998,13(1):65-68.
|
| [3] |
徐红洲,王尚锦,刘松龄,等.气膜冷却喷孔附近的流场实验研究.西安交通大学学报,1998,32(7):46-50.XU Hongzhou,WANG Shangjin,LIU Songling,et al.Flow field behavior at exit of film cooling hole[J].Journal of Xi'an Jiaotong University,1998,32(7):46-50.
|
| [4] |
Goldstein R J,Jin P.Film cooling downstream of a row of discrete holes with compound angle[R].ASME 2000-GT-248.
|
| [5] |
宋波,林宇震,刘高恩,等.不同排列方式多斜孔壁气膜冷却绝热温比研究[J].航空动力学报,1999,14(1):91-94.SONG Bo,LIN Yuzhen,LIU Gaoen,et al.An investigation on film cooling effectiveness of inclined-mutihole walls with different patterns[J].Journal of Aerospace Power,1999,14(1):91-94.
|
| [6] |
林宇震,宋波,李彬,等.不同倾斜角多斜孔壁冷却方式绝热温比研究[J].航空学报,1999,20(3):201-204.LIN Yuzhen,SONG Bo,LI Bin,et al.Investigation of adiabatic wall effectivenessof the inclined multihole wall film cooling with different angles to the wall surface[J].Acta Aeronautica et Astronautica Sinica,1999,20(3):201-204.
|
| [7] |
徐靖中,姚永庆,贾建国,等.凸表面单排孔30°喷射气膜冷却流场近场特性的实验研究[J].工程热物理学报,1984,4(2):182-186.XU Jingzhong,YAO Yongqing,JIA Jianguo,et al.Experimental investigation on the near-field character of film cooling with 30° injection from a row of holes ona convex surface[J].Journal of Engineering Thermophysics,1984,4(2):182-186.
|
| [8] |
Berhe M K,Patankar S V.Investigation of discrete-hole film cooling parameters using curved-plate models[R].ASME 98-GT-374.
|
| [9] |
CHEN Pinghei,DING Peipei,HUANG Minsheng,et al.Film cooling over a concave surface through a row of expanded holes[R].ASME 99-GT-33.
|
| [10] |
李彬,胡正义,林宇震,等.多斜孔壁整体冷却效率实验研究[J].航空动力学报,1999,14(2):157-160.LI Bin,HU Zhengyi,LIN Yuzhen,et al.Cooling effectiveness of inclined multiholesplates[J].Journal of Aerospace Power,1999:14(2):157-160.
|
| [11] |
胡娅萍,吉洪湖.致密多孔壁冷流入射角对冷却效果影响的数值研究[J].航空动力学报,2005,20(1):116-119.HU Yaping,JI Honghu.Numerical study of the blowing angle effect on effusion cooling effectiveness[J].Journal of Aerospace Power,2005,20(1):116-119.
|
| [12] |
樊洪明,何钟怡,王小华.弯曲管段内流动的大涡[J].水动力学研究与进展,2001,11(1):78-83.FAN Hongming,HE Zhongyi,WANG Xiaohua.Large eddy simulation of a curved duct flow[J].Journal of Hydrodynamics,2001,11(1):78-83.
|
DownLoad: