| Citation: | WANG Qi, SHAN Peng. Integrated inverse problem optimization method of through-flow design/airfoil design/CFD simulation for centrifugal compressors[J]. Journal of Aerospace Power, 2007, 22(2): 291-297.
|
| [1] |
Pierret S,Van den Braembussche R A.Turbomachinery blade design using a Navier-Stokes solver and artificial neural network[R].International Gas Turbine & Aeroengine Congress & Exhibition,1998.
|
| [2] |
Koller U,Monig R,Kusters B,et al.Development of advanced compressor airfoils for heavy-duty gas turbines,part 1:desing and optimization[R].ASME 99-GT-95.
|
| [3] |
Ahn C S,Kim K Y.Aerodynamic design optimization of an axial flow compressor rotor[R].Proceedings of ASME Turboexpo,2002.
|
| [4] |
Abdelhamid H F,Shreeve R P.Sweep in a transonic rotor,part 1:3D geometry package[R].Proceedings of ASME Turboexpo,1998.
|
| [5] |
Abdelhamid H F,Shreeve R P.Sweep in a transonic rotor,part 2:CFD and stress analyses[R].Proceedings of ASME Turboexpo,1998.
|
| [6] |
陈波,袁新.基于NURBS三维造型的粘性气动最优化设计技术[A].中国工程热物理学会热机气动热力学学术会议论文集[C].北京:中国工程热物理学会,2004:345-350.
|
| [7] |
高学林,袁新,叶轮机械全三维粘性气动优化设计系统[A].中国工程热物理学会热机气动热力学学术会议论文集[C].北京:中国工程热物理学会,2004:351-355.
|
| [8] |
王晓锋,席光,王尚锦.离心压缩机叶轮的响应面法优化设计Ⅰ--优化设计方法[A].中国工程热物理学会热机气动热力学学术会议论文集[C].北京:中国工程热物理学会,2003:227-232.
|
| [9] |
席光,王晓锋,王尚锦.离心压缩机叶轮的响应面法优化设计Ⅱ-优化设计实例及讨论[A].中国工程热物理学会热机气动热力学学术会议论文集[C].北京:中国工程热物理学会,2003:233-238.
|
| [10] |
王琦,单鹏.径流及斜流压气机任意曲面叶型长短叶片的造型设计方法[J].航空动力学报,2006,21(4):747-753.WANG Qi,SHAN Peng.Design radial flow and mixed flow compressor rotor splitter-blades[J].Journal of Aerospace Power,2006,21(4):747-753.
|
DownLoad: