Volume 22 Issue 4
Apr.  2007
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2007  >  22(4): 653-659
ZHAO Xiao-lu, TANG Fei. Development trend of short-duration turbine experiments[J]. Journal of Aerospace Power, 2007, 22(4): 653-659.
Citation: ZHAO Xiao-lu, TANG Fei. Development trend of short-duration turbine experiments[J]. Journal of Aerospace Power, 2007, 22(4): 653-659.
shu

Development trend of short-duration turbine experiments

  • Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100080, China

  • Received Date: 2006-03-27
  • Rev Recd Date: 2006-11-07
  • Publish Date: 2007-04-28
    Abstract
  • The development and expansion of overseas short-duration turbine testing techniques were summarized and analyzed by comparing the advantages and disadvantages of short-/long-duration turbine testing techniques. Spurred by the demand of developing high performance aeroengine, the short-duration turbine testing technique was improved greatly to achieve the measurement accuracy of long-duration turbine testing technique.The purpose of short-duration turbine testing technique is to replace partially long-duration turbine testing technique by developing from a mechanics investigation platform into a performance investigation platform. As an important basic study platform, short-duration turbine testing platform has developed in the mechanism research field and has now been applied to validation of new design concept and check of CFD software.

     

    • FullText(HTML)
  • loading
    • References(34)
  • [1]
    Haldeman C W,Dunn M G,Abhari R S,et al.Experimental and computational investigation of the time-averaged and time-resolved pressure loading on a vaneless count-rotating turbine[R].ASME Paper 2000-GT-0445.
    [2]
    Haldeman C W,Dunn M G,Barter J W,et al.Experimental investigation of vane clocking in a one and 1/2 stage high pressure turbine[R].ASME Paper GT2004-53477.
    [3]
    Billiard N,Paniagua G,Dénos R.Effect of clocking on the heat transfer distribution of a second stator tested in a one and half stage HP turbine[R].ASME Paper GT2005-68462.
    [4]
    唐菲,陈党慧.1+1/2对转涡轮短周期试验台性能测试[A].中国工程热物理学会第十一届年会论文集[C].北京:热机气动热力学分卷,2005:520-526.
    [5]
    陈党慧,唐菲,赵晓路,等.暂冲式短周期试验台涡轮性能及不确定度分析[J].中北大学学报(自然科学版),2006,27(3):253-257.CHEN Danghui,TANG Fei,ZHAO Xiaolu,et al.Turbine performance measurement method and its uncertainty estimate on a blow-down short duration rig[J].Journal of North University of China,2006,27(3):253-257.
    [6]
    Povey T,Chana K S,Jones T V,et al.The effect of hot-streaks on HP vane surface and endwall heat transfer:An experimental and computational study[R].ASME Paper GT2005-69066.
    [7]
    Castillon L,Laroche E,Sgarzi O.Unsteady three-dimensional navier-stokes analysis of a hot streak transport through an axial high pressure turbine stage[R].ISABE 2003-1063.
    [8]
    Chana K S,Povey T,Terry P.The design,developmentand testing of a non-uniform inlet temperature generator for the QinetiQ transient turbine research facility[R].ASME Paper GT2003-38469.
    [9]
    Barringer M D,Thole K A,Polanka M D.Developing acombustor simulator for investigating high pressure turbine aerodynamics and heat transfer[R].ASME Paper GT2004-53613,2004.
    [10]
    Shan T,Epstein A H.Analysis of hot streak effects onturbine rotor heat load[R].ASME Paper 96-GT-118.
    [11]
    Weaver M M,Manwaring S R.Forcing function measurements and predictions of a transonic vaneless counter rotating turbine[R].ASME Paper 2000-GT-375.
    [12]
    Kielb J J,Reza S A.Experimental study of aerodynamic and structural damping in a full scale rotating turbine[R].ASME Paper 2001-GT-0262.
    [13]
    Kielb J J,Reza S A.Experimental and numerical study of forced response in a fullscale rotating turbine[R].ASME Paper No.2001-GT-0263.
    [14]
    Haldeman C W,Dunn M G,Barter J W,et al.Aerodynamic and heat-flux measurements with predictions on a modern one and 1/2 stage high pressure transonic turbine[R].ASME Paper GT2004-53478.
    [15]
    Smith G C,Hilditch M A.Heat transfer computations for high pressure turbine[R].ASME Paper 2001-GT-0172.
    [16]
    Haldeman C W,Dunn M G.Heat transfer measurements and predictions for the vane and blade of a rotating high pressure stage[R].ASME Paper GT2003-38726.
    [17]
    Tallman J A.CFD heat transfer predictions for a high-pressure turbine stage[R].ASME Paper GT2004-53654.
    [18]
    Bergholz R F,Dunn M G,Steuber G D.Rotor/stator heat transfer measurements and CFD predictions for short-duration turbine rig tests[R].ASME Paper 2000-GT-0208.
    [19]
    Dunn M G,Haldeman C W.Time-averaged heat flux for a recessed tip,lip,and platform of a Transonic turbine blade[R].ASME Paper 2000-GT-0197.
    [20]
    Chana K S,Jones T V.An investigation on turbine tip and shroud heat transfer[R].ASME Paper GT-2002-30554.
    [21]
    Polanka M D,Clark J P,White A L,et al.Turbine tip and shroud heat transfer and loading part B:Comparisons between prediction and measurement including insteady effects[R].ASME Paper GT-2003-38916.
    [22]
    Steven J,Thorpe R J,Miller.The effect of work processes on the casing heat transfer of a rotating turbine[R].ASME Paper GT2005-68437.
    [23]
    Didier F,Dénos R,Arts T.Unsteady rotor heat transfer in a transonic turbine stage[R].ASME Paper GT-2002-30195.
    [24]
    Iliopoulou V,Dénos R,Billiard N,et al.Time-averaged and time-resolved heat flux measurements on a turbine stator blade using two-layered thin-film gauges[R].ASME Paper GT2004-53437.
    [25]
    William A,Ainsworth R,Thorpe S.Unsteady heat transfer measurements from transonic turbine blades at engine representative conditions in a transient facility[R].ASME Paper GT2004-53835.
    [26]
    Keogh R C,Guenette G R,Spadaccini C M,et al.Aerodynamic performance measurements of a film-cooled turbine stage-experimental results[R].ASME Paper GT-2002-30344.
    [27]
    Chana K S,Hilditch M A,Anderson J.An investigation of the effects of film cooling in a high-pressure aeroengine turbine stage[R].ASME Paper GT2005-68564.
    [28]
    Dénos R,Arts T,Paniagua G,et al.Investigation of the unsteady rotor aerodynamics in a transonic turbine stage[R].ASME Paper 2000-GT-435.
    [29]
    Clark J P,Stetson G M,Magge S S,et al.The effect of airfoil scaling on the predicted unsteady loading on the blade of a 1 and 1/2 stage transonic turbine and a comparison with experimental results[R].ASME Paper 2000-GT-0446.
    [30]
    Valenti E,Halama J,Denos R,et al.Investigation of the 3D unsteady rotor pressure field in a HP turbine stage[R].ASME Paper GT-2002-30365.
    [31]
    Brian R,Green J W,Barter C,et al.Time-averaged and time-accurate aero-dynamics for the recessed tip cavity of a high-pressure turbine blade and the outer stationary shroud:domparison of computational and experimental results[R].ASME Paper GT2004-53443.
    [32]
    Keogh R C,Guenette G R,Sommer T P.Aerodynamic performance measurements of a fully-scaled turbine in a short duration facility[R].ASME Paper 2000-GT-486.
    [33]
    Atkins N R,Miller R J,Ainsworth R W.The development of aerodynamic performance measurements in a transient test facility[R].ASME Paper GT2004-53813.
    [34]
    Atkins N R,Ainsworth R W.The measurement of shaft power in a fully scaled transient turbine test facility[R].ASME Paper GT2005-68998.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(666.0KB)
    XML

    Article Metrics

    Article views (1503) PDF downloads(432) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return