| Citation: | LI Sheng-peng, FANG Zong-de, ZHANG Jin-liang, GUO Hui. Analysis of tooth root bending stress for spiral bevel gears[J]. Journal of Aerospace Power, 2007, 22(5): 843-848.
|
| [1] |
Dempsey P J,Handschuh R F,Afjeh A A.Spiral bevel gear damage detection using decision fusion analysis[R].NASA Technical Memorandum 211814,2002.
|
| [2] |
方宗德,杨宏斌.准双曲面齿轮弯曲应力过程的精确计算[J].汽车工程,2000,22(6):423-426.FANG Zongde,YANG Hongbin.Accurate calculation of time history of tooth bending stress for hypoid gears[J].Automotive Engineering,2002,22(6):423-426.
|
| [3] |
邓效忠,方宗德,魏冰阳.接触路径对弧齿锥齿轮接触应力和弯曲应力的影响[J].中国机械工程,2003,14(22):1895-1898.DENG Xiaozhong,FANG Zongde,WEI Bingyang.Analysis of contact stress and bending stress on spiral bevel gears of high contact ratio[J].China Mechanical Engineering,2003,14(22):1895-1898.
|
| [4] |
Litvin F L,Fuentes A,Fan Q,et al.Computerized design,simulation of meshing,and contact and stress analysis of face-milled formate generated spiral bevel gears[J].Mechanism and Machine Theory,2002 37:441-459.
|
| [5] |
邓效忠,方宗德,杨宏斌,等.高重合度弧齿锥齿轮的强度分析[J].航空动力学报,2002,17(3):367-372.DENG Xiaozhong,FANG Zongde,YANG Hongbin,et al.Analysis of meshing behavior and experiments of spiral bevel gears with high contact ratio[J].Journal of Aerospace Power,2002,17(3):367-372.
|
| [6] |
邓效忠,方宗德,张金良,等.弧齿锥齿轮的高重合度设计[J].中国机械工程,2002,13(9):791-795.DENG Xiaozhong,FANG Zongde,ZHANG Jingliang,et al.Design of spiral bevel gears with high contact ratio[J].China Mechanical Engineering,2002,13(9):791-795.
|
| [7] |
刘刚田,赵萍,杨耀山,等.弧齿锥齿轮的实体造型和有限元强度分析[J].矿山机械,2003,10:61-62.LIU Gangtian,ZHAO Ping,YANG Yaoshan,et al.Moulding of full size of the spiral bevel gears and its finite element strength analysis[J].Ming & Processing Equipment,2003,10:61-62.
|
| [8] |
龚曙光、谢桂兰.ANSYS操作命令与参数化编程[M].北京:机械工业出版社,2004.
|
DownLoad: