Volume 23 Issue 1
Jan.  2008
Turn off MathJax
Article Contents
PENG Hao, SUN Zhi-jiang, LING Xiang. Numerical and experimental study on flow and heat transfer performance of some compact surface recuperators[J]. Journal of Aerospace Power, 2008, 23(1): 138-144.
Citation: PENG Hao, SUN Zhi-jiang, LING Xiang. Numerical and experimental study on flow and heat transfer performance of some compact surface recuperators[J]. Journal of Aerospace Power, 2008, 23(1): 138-144.

Numerical and experimental study on flow and heat transfer performance of some compact surface recuperators

  • Received Date: 2006-12-26
  • Rev Recd Date: 2007-04-20
  • Publish Date: 2008-01-28
  • A unit control model was established using computational fluid dynamic(CFD) method,while the heat transfer and fluid flow performances on primary surface of recuperator(stainless steel serrated fin and cross corrugated(CC) primary surface) were simulated numerically and also compared with the experimental results.The results show good consistency between numerical simulation and experimental data.To this end,the effect of CCsurface structural parameters on heat transfer performance was discussed,and then the heat transfer and flow characteristics were compared for different structural scales and surface arrangements,thus providing a basis for design optimization of recuperators.

     

  • loading
  • [1]
    McDonald C F.Low cost recuperator concept for microturbine applications[R].ASME 2000-GT-167,2000.
    [2]
    Gunnar L,Max X.High performance and cost effective recuperator for micro-gas turbines[R].ASME GT-2002-30402,2002.
    [3]
    Ciofalo M,Stasiek J,Collins M W.Investigation of flow and heat transfer in corrugated passages-Ⅰ experimental results[J].International Journal of Heat Mass transfer,1996,39:149-164.
    [4]
    Utriainen E,Sunden B.Evaluation of the cross corrugated and some other candidate heat transfer surfaces for microturbine recuperators[J].ASME Journal of Engineering for Gas Turbines and Power,2002,12:550-560.
    [5]
    Campbell J F,Rohsenow W M.Gas turbine regenerators:a method for selecting the optimum plate-finned surface pair for minimum core volume[J].International Journal of Heat Mass Transfer,1992,35:3441-3450.
    [6]
    Shan R K.Compact heat exchanger technology and applications[M]//Heat Exchange Engineering:Vol.2,London:Ellis Horwood Limited,1991.
    [7]
    Sparrow E M,Hajiloo A.Measurements of heat transfer and pressure drop for an array of staggered plates aligned parallel to an air flow[J].Transactions of the ASME,1980,102:426-432.
    [8]
    Sparrow E M,Liu C H.Heat transfer pressure drop and performance relationships for inline,staggered and continuous plate heat exchangers[J].Int.J.Heat Mass Transfer,1979,22:1613-1625.
    [9]
    Joshi H M,Webb R L.Heat transfer and friction in the offset strip-fin heat exchanger[J].International Journal of Heat Mass Transfer,1987,30:69-84.
    [10]
    Manglik R M,Bergles A E.Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger[J].Experimental Thermal and Fluid Science,1995,10:171-180.
    [11]
    Utriainen E.Investigation of some heat transfer surface for gas turbine recuperator[R].Sweden,Lund:Lund Institute of Technology,2001.
    [12]
    Ciofalo M,Collins M W,Henry F S.Laminar and turbulent flow and heat transfer in crossed corrugated heat exchangers[J].In Numerical Methods for Thermal Problems,1991,8:622-638.
    [13]
    NIE Song,QU Wei.Numerical simulation on heat transfer and flow performances of CC primary surface recuperator[J].Journal of Engineering Thermophysics,2004,25(6):899-991
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1371) PDF downloads(460) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return