| Citation: | ZHANG Xiao-ying, CAI Guo-biao, ZHU Ding-qiang. Numerical calculation of the radiative heat transfer and wall temperature of the rocket nozzle[J]. Journal of Aerospace Power, 2008, 23(1): 195-200.
|
| [1] |
Alhama F,Campo A.Network simulation of the rapid temperature changes in the composite nozzle wall of an experimental rocket engine during a ground firing test[J].Applied Thermal Engineering,2003,23:37-47.
|
| [2] |
Brown,Andrew M.Temperature-dependent modal test/analysis correlation of X-34 FASTRAC composite rocket nozzle[J].Journal of Propulsion and Power,2002,18(2):284-288.
|
| [3] |
Melia P F.A detailed thermal analysis of a large soled propellant rocket nozzle[R].AIAA 85-1186.
|
| [4] |
Jia Linxiang.An analytical and experimental inverstigation of nozzle deposition heat transger in aluminized solid rocket motors[R].AIAA87-2232.
|
| [5] |
Edwards J W.ASRM nozzle design and development[R].AIAA91-2070.
|
| [6] |
Maw J F,Buttars R L.Thermal analysis of ASRM nozzle[R].TWR-62159 RevA,July 28,1992,97-205.
|
| [7] |
Nool A K,Burton S.Accuracy of critical-temperature sensitivity coefficients predicted by mutilayered composite plate theories[J].AIAA Journal,1992,3(9):197-205.
|
| [8] |
Berdoyes M.SRM nozzle design breakthroughs with advanced composite material[R].AIAA93-2009.
|
| [9] |
孙菊芳,孙冰,相升海.固体火箭发动机复合结构喷管温度场与应力场理论计算[J].推进技术,1994,15(1):23-31.SUN Jufang,SUN Bing,XIANG Shenghai.Theoretical calculation of complex nozzle's temperature profile and stress profile in solid rocket motor[J].Journal of Propulsion Technology,1994,15(1):23-31.
|
| [10] |
张津,吴护林.发动机喷管隔热涂层的设计和计算[J].兵工学报,2002,23(2):209-211.ZHANG Jing.WU Hulin.Design and simulation for thermal barring coating on high temperature engine nozzles[J].Acta Armamentarii,2002,23(2):209-211.
|
| [11] |
翁中杰.小型固体火箭发动机喷管内壁表面瞬态温度的测量[J].推进技术,1984,5(1):51-55.WENG Zhongjie.Measurement of the transient temperature on inside wall of small typed rocket nozzle[J].Journal of Propulsion Technology,1984,5(1):51-55.
|
| [12] |
候小利,蔡体敏.在烧蚀条件下固体火箭发动机复合喷管的温度预示[J].推进技术,1988,9(6):18-23.HOU Xiaoli,CAI Timin.The temperature prediction for composite nozzle of solid rocket motor under ablation[J].Journal of Propulsion Technology,1988,9(6):18-23.
|
| [13] |
陶文铨.数值传热学[M].西安:西安交通大学出版社,2001.TAO Wenquan.Numerical heat transfer[M].Xi'an:Xi'an Jiaotong University Press,2001:92-93.
|
| [14] |
珪英,胡克娴.固体火箭发动机[M].北京:北京理工大学出版社,1990:113-114.GUI Ying,Hu Kexian.Solid rocket engines[M].Beijing:Beijing Institute of Technology Press,1990,113-114.
|
| [15] |
冯文澜,张远君.液体火箭发动机原理[M].北京:北京航空航天大学出版社,1991.FENG Wenlan,ZHANG Yuanjun.Principle of liquid rocket engine[M].Beijing:Beijing University of Aeronautics and Astronautics Press,1991.
|
| [16] |
Collins M W,Stasiek J.The application of a transformational zone method to the calculation of radiation heat transfer inside a piston-cylinder system[J].International Journal of Heat and Fluid Flow,1992,13(4):380-389.
|
| [17] |
方丁酉,夏智勋,姜春林.C/C喉衬稳态烧蚀的工程计算[J],固体火箭技术,2000,23(2):24-27.FANG Dingyou,XIA Zhixun,JIANG Chunlin.Engineering calculating of C/C throat insert ablation[J].Journal of Solid Rocket Technology,2000,23(2):24-27.
|
DownLoad: