| Citation: | CAO Guang-zhou, JI Hong-hu, YUAN Yan-ping. A porous medium model for simulating leakage flows through brush seals[J]. Journal of Aerospace Power, 2008, 23(3): 443-447.
|
| [1] |
Chupp R E,Holle G F.Generalizing circular brush seal leakage through a randomly distributed bristle bed[J].Journal of Turbomachinery,1996,118:153-161.
|
| [2] |
Chew J W,Hogg S I.Porosity modeling of brush seals[J].ASME Journal of Tribology,1997,119:769-775.
|
| [3] |
丁水汀,陶智,徐国强.刷式封严流动和换热的数值模拟[J].推进技术,1999,20(1):65-67.DING Shuiting,TAO Zhi,XU Guoqiang.Numerical simulation on fluid flow and heat transfer of a brush seal configuration[J].Journal of Propulsion Technology,1999,20(1):65-67.
|
| [4] |
黄学民,史伟,王洪铭.刷式密封中泄漏流动的多孔介质数值模型[J].航空动力学报,2000,15(1):55-58.HUANG Xuemin,SHI Wei,WANG Hongming.Porous medium leakage flow model of brush seal[J].Journal of Aerospace Power,2000,15(1):55-58.
|
| [5] |
王之栎,王宗根,孙丽霞.刷密封内流动与密封特性的研究[J].润滑与密封,2005(6):114-116.WANG ghili,WANG Zonggen,SUN Lixia.Research on flow and seal character in brush seal[J].Lubrication Engineering,2005 (6):114-116.
|
| [6] |
谢晓俊,康宁.低泄漏高寿命刷式封严的数值计算[J].航空动力学报,2003,18(6):824-826.XIE Xiaojun,KANG Ning.Numerical computation of low leakage and high endurance brush seal[J].Journal of Aerospace Power,2003,18(6):824-826.
|
| [7] |
Short J F,Basu P,Data A,et al.Advanced brush seal development[R].AIAA Paper 96-2907.
|
| [8] |
FLUENT User's Guidel[Z].Fluent Inc.,2003.
|
| [9] |
林瑞泰.多孔介质传热传质引论[M].北京:科学出版社,1995.
|
DownLoad: