| Citation: | CHEN Yun-yong, LIU Bo, MA Cong-hui, GAO Li-min, SHI Jian-cheng, WEN Quan. Three-dimension blade optimization of multi-blade fan/compressor[J]. Journal of Aerospace Power, 2008, 23(3): 516-521.
|
| [1] |
李晓娟,桂幸民.风扇/增压级带间隙三维粘性流场数值模拟[J].北京航空航天大学学报,2006,32(1):4-7.LI Xiaojuan,GUI Xingmin.Numerical simulation of three dimension viscous flow of fan/compressor with tip clearance[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32 (1):4-7.
|
| [2] |
刘波,王强.不同分流比下风扇/压气机组合体性能预估研究[J].西北工业大学学报,2001,19(3):349-352.LIU Bo,WANG Qiang.On predicting effect of by-pass ratio on fan/compressor performance[J].Journal of North-western Polytechnical University,2001,19(3):349-352.
|
| [3] |
Christopher H,David A,Ricardo B,et al.Fan flow control for noise reduction.Part I-Advanced trailing edge blowing concepts[R].AIAA 2005-3025.
|
| [4] |
Ryman J F,O'Brien W F,Rabe D C.Multi-stage fan and compressor transfer of inlet total pressure distortion with emphasis on high cycle fatigue[R].AIAA 2003-4979.
|
| [5] |
Yin J,Hales R,Pilidis P,et al.Shaft high-bypass ratio turbofan performance calculation using a new 2-D fan model[R].AIAA 2001-3302.
|
| [6] |
Cesnik C E S,Mok J,Parikh A S.Optimization design framework for integrally twisted helicopter blades[R].AIAA 2004-1761.
|
| [7] |
Leoviriyakit K,Kim S,Jameson A.Viscous aerodynamic shape optimization of wingsincluding planform variables[R].AIAA 2003-3498.
|
| [8] |
Dang T Q,Van Rooij M.Design of aspirated compressor blades using three-dimensional inverse method[R].NASA/TM-2003-212212.
|
| [9] |
尉涵,袁新.轴流压气机多叶片排的气动优化设计[J].热能动力工程,2005,20(6):603-606.YU Han,YUAN Xin.Optimized aerodynamic design ofmulti-blade rows of an axial compressor[J].Journal of Engineering for Thermal Energy and Power,2005,20 (6):603-606.
|
| [10] |
伊卫林,黄鸿雁,韩万金.轴流压气机叶片优化设计[J].热能动力工程,2006,21(2):140-144.YI Weilin,HUANG Hongyan,HAN Wanjin.Optimized design of compressor blades[J].Journal of Engineering for Thermal Energy and Power,2006,21(2):140-144.
|
DownLoad: