| Citation: | LI Qing-liang, LIU Bao-jie. Modification of the turbulence model of DENTON code[J]. Journal of Aerospace Power, 2008, 23(5): 834-839.
|
| [1] |
Denton J D.The calculation of three-dimensional viscous flow through multistage turbomachines[J].ASME Journal of Turbomaehinery,1992,114:18-26.
|
| [2] |
Dawes W N.Toward improved throughflow capability:The use of three-dimensional viscous flow solvers in a multistage environment[J].ASME Journal of Turbomachinery,1992,114:8-17.
|
| [3] |
Rhie D M,Gleixner A J,Fischberg C J,et al.Development and application of a multistage Navier-Stokes solver Part 1:Multistage modeling using bodyforces and deterministric stresses[R].ASME 95-GT-342.
|
| [4] |
Rhie D M,Gleixner A J,Fischberg C J,et al.Development and application of a multistage Navier-Stokes solver part 2:Application to a high pressure compressor design[R].ASME 95-GT-343.
|
| [5] |
Adamczyk J J.Aerodynamic analysis of multistage turbomachinery flows in support of aerodynamic design[R].ASME 99-GT-80.
|
| [6] |
刘宝杰,邹正平,严明,等.叶轮机计算流体动力学技术现状与发展趋势[J].航空学报,2002,23(5):394-404.LIU Baojie,ZOU Zhengping,YAN Ming,et al.Present status and future development of CFD turbomachinery[J].Acta Aeronautica et Astronautica Sinica,2002,23(5):394-404.
|
| [7] |
Gallimore S J,Bolger J J,Cumpsty N A,et al.The use of sweep and dihedral in multistage axial flow compressor blading Part I:University research and methods development[J].Journal of Turbomachinery,2002,124:521-532.
|
| [8] |
Denton J D.Lessons from rotor37[J].Journal of Thermal Science,1997,6(1):1-13.
|
| [9] |
李鹏年.叶轮机内部流动湍流模型的研究[D].北京:北京航空航天大学,2006.
|
| [10] |
Fottner L.Test cases for computation of internal flows in aero engine components[R].AGARD-AR-275,1990.
|
| [11] |
Strazisar A J,Wood J R,Hathaway M D,et al.Laser anemometer measurement in a transonic axial-flow fan rotor[R].NASA-Tp-2879,1989.
|
| [12] |
Suder K L,Chima R V,Strazisar A J,et al.The effect of adding roughness and thickness to a transonic axial compressor rotor[R].ASME 94-GT-339.
|
| [13] |
Suder K L,Celestina M J.Experimental and computational investigation of the tip clearance flow in a transonic axial compressor rotor[R].AsME 94-GT-365.
|
DownLoad: