| Citation: | ZHANG Yan-feng, CHU Wu-li, LU Xin-gen. Numerical simulation of the flow characteristic of tip leakage flow in a transonic axial-flow compressor at near stall condition[J]. Journal of Aerospace Power, 2008, 23(7): 1293-1298. |
| [1] |
Hoying D A,Tan C S,Vo H D,et al.Role of blade passage flow structures in axial compressor rotating stall inception[J].ASME Journal of Turbomachinery,1999,121(4):735-742.
|
| [2] |
Vo H D,Tan C S,Greitzer E M.Criteria for spike initiated rotating stall[R].ASME Paper,2005-GT-68374,2005.
|
| [3] |
Hoffman W H,Ballman J.Some aspects of tip vortex behavior in a transonic turbocompressor[R].ISABE Paper,2003-1223,2003.
|
| [4] |
Hoffman W H,Ballman J.Flow mechanisms in a transonic turbocompressor at conditions near stall[R].ISABE Paper,2005-1139,2005.
|
| [5] |
Yamada K,Furukawa M,lnoue M,et al.Unsteady three-dimensional flow phenomena due to breakdown of tip leakage vortex in a transonic axial compressor rotor[R].ASME Paper,GT2004-53745.
|
| [6] |
Bergner J,Kinzel M,Schiffer H,et al.Short length-scale rotating stall inception in a transonic axial compressor-experimental investigation[R].ASME Paper,2006-GT-90209,2006.
|
| [7] |
Hah C,Bergner J,Schiffer H.Short length-scale rotating stall inception in a transonic axial compressor-criteria and mechanisms[R].ASME Paper,2006-GT-90045,2006.
|
| [8] |
贾希诚,王正明,叶轮机械中间隙流与通道二次流相互作用的数值研究[J].航空动力学报,2002,17(4):439-403.JIA Xicheng,WANG Zhengming.Numerical study of interaction between clearance flow and passage secondary flow in turbomachinery[J].Journal of Aerospace Power 2002,17(4):439-403.(in Chinese)
|
| [9] |
聂超群,桂幸民,于清,等.跨音压气机近失速状态的非定常特征,工程热物理学报[J].1999,20(2):171-175.NIE Chaoqun,GUI Xingmin,YU Qing,et al.Unsteady flow behavior of near-stall states in a transonic axial compressor[J].Journal of Engineering Thermophysics,1999,20(2):171-175.(in Chinese)
|
| [10] |
卢新根.轴流压气机内部流动失稳及其被动控制策略研究[D].西安:西北工业大学,2007.LU Xingen.Flow Instability and its passive control strategies in axial-flow compressor[D].Xi'an:Northwestern Polytechnical University,2007.(in Chinese)
|