Volume 23 Issue 8
Aug.  2008
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2008  >  23(8): 1438-1442
GUO Hui, ZHAO Ning, FANG Zong-de, SHEN Yun-bo. Research on bending strength of face-gear transmission based on contact finite element method[J]. Journal of Aerospace Power, 2008, 23(8): 1438-1442.
Citation: GUO Hui, ZHAO Ning, FANG Zong-de, SHEN Yun-bo. Research on bending strength of face-gear transmission based on contact finite element method[J]. Journal of Aerospace Power, 2008, 23(8): 1438-1442.
shu

Research on bending strength of face-gear transmission based on contact finite element method

  • School of Mechantronic Engineering, Northwestern Polytechnical University, Xi'an 710072, China

  • Received Date: 2007-08-06
  • Rev Recd Date: 2008-01-17
  • Publish Date: 2008-08-28
    Abstract
  • The fillet surface equation of face gears was presented when the top of the shaper tooth was rounded.A 'mesh filter method' was proposed in view of the particularity of face-gear's structure,and the distortion of the element shape was corrected.Based on tooth contact analysis(TCA),the variation of bending stresses during the cycle of meshing was computed with 3-Dcontact finite element method when some parameters changed.The results indicate that both of the nominal pressure angle and shaft adjustments of face-gear have significant influence on the bending strength.

     

    • FullText(HTML)
  • loading
    • References(8)
  • [1]
    Robert Dr,Bill C.Summary highlights of the advanced rotorcraft transmission (ART) program[R].AIAA Paper 92-3362,July 1992.
    [2]
    Litvin F L,Egelja A,Tan J,et al.Handbook of face gear drives with a spur involute pinion[R].NASA Final Contractor Report CR-209909,2000.
    [3]
    Litvin F L,Fuentes A,Howkins M.Design,generation and TCA of new type of asymmetric face-gear drive with modified geometry[J].Comput.Methods Appl.Mech.Engrg.,2001,190:5837-5865.
    [4]
    Litvin F L,Fuentes A,ganzi C,et al.Face-gear drive with spur involute pinion:Geometry,generation by a worm,stress analysis[J].Comput.Methods Appl.Mech.Engrg.,2002,191:2785-2813.
    [5]
    Guingand M,de Vaujany J P,Jacquin C Y.Quasi-static analysis of a face gear under torque[J].Comput.Methods Appl.Mech.Engrg.,2005,194,4301-4318.
    [6]
    杨连顺,朱如鹏,曾英.正交面齿轮弯曲应力的分析[J].机械科学与技术,1999,20(5):708-709.YANG Lianshun,ZHU Rupeng,ZENG Ying.Analysis of bending stress in perpendicular face gear[J].Mechanical Science and Technology,1999,20(5):708-709.(in Chinese)
    [7]
    朱如鹏,高德平.在面齿轮设计中避免根切和齿顶变尖的设计方法的研究[J].中国机械工程,1999,10(11):1274-1276.ZHU Rupeng,GAO Deping.Study on the method of avoiding dedendum undercutting and addendum pointing in face gear design[J].China Mechanical Engineering,1999,10(11):1274-1276.(in Chinese)
    [8]
    傅则绍.微分几何与齿轮啮合原理[M].东营:石油大学出版社,1999.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(1557.0KB)
    XML

    Article Metrics

    Article views (2368) PDF downloads(454) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return