| Citation: | WANG Zhi-li, LIANG Xiao-feng, HUANG Qi-wu. Two-dimensional model mathematical simulation of brush seals[J]. Journal of Aerospace Power, 2008, 23(8): 1461-1465.
|
| [1] |
Lelli D,Chew J W,Cooper P.Combined three-dementional fluid dynamic and mechanical modeling of brush seals[J].Journal of Turbomachinery,2006,128:188-195.
|
| [2] |
Turner M T,Chew J W,Long C A.Experiment investigation and modeling of clearance brush seal[J].Journal of Engineering for Gas Turbines and Power,1998,120:573-579.
|
| [3] |
Ferguson,J G.Brushes as high performance gas turbine seals[R].ASME Paper 88-GT-182.
|
| [4] |
Chew J W,Lapworth B L,Millener P J.Mathematical modeling of brush seals[J].Int.J.Heat and Fluid Flow,1995,16(6):493-500.
|
| [5] |
帕坦卡S V.传热与流体流动的数值模拟[M].张政,译.北京:科学出版社,1984.Patankar S V.Numerical heat transfer and fluid flow[M].ZHANG Zheng.Beijing:Science Press,1984.(in Chinese)
|
| [6] |
黄其武.刷式密封设计方法与性能研究[D].北京:北京航空航天大学,2007.HUANG Qiwu.Design method and performance of brush seals[D].Beijing:Beijing University of Aeronautics and Astronautics,2007.(in Chinese)
|
| [7] |
孙晓萍.刷式密封性能和耐久性试验研究[J].航空发动机,2002(3):37-41.SUN Xiaoping.Experimental investigation of performance and durability of brush seal[J].Aeroengine,2002(3):37-41.(in Chinese)
|
| [8] |
李人宪.有限体积法基础[M].北京;国防工业出版社,2005.LI Renxian.The based of finite volume method[M].Beijing:National Defence Industry Press,2005.(in Chinese)
|
DownLoad: