| Citation: | ZOU Zheng-ping, LI Yu, LIU Huo-xing, ZHANG Zheng-qiu, YE Jian, LI Wei, CHEN Jing-wei. Key turbomachinery technology of civil high-bypass-ratio turbofan engine[J]. Journal of Aerospace Power, 2008, 23(8): 1504-1518.
|
| [1] |
方昌德.美国综合高性能涡轮发动机技术计划和我国的对策[R].中国航空工业第一集团第628研究所,HY99018,1999.
|
| [2] |
AIAA Position Paper.The integrated high performance turbine engine technology (IHPTET) initiative[R].AIAA.August 1991.
|
| [3] |
AIAA Position Paper.The versatile affordable advanced turbine engines (VAATE) initiative[R].AIAA,January 2006.
|
| [4] |
梁春华,刘红霞.美国超高效发动机技术计划[J].航空发动机,2002,(4):58.
|
| [5] |
梁春华.TECH56技术计划的发展[J].航空发动机,2002,(4):21.
|
| [6] |
孙广华.CFMI公司启动前沿航空推进(LEAP)技术计划[J].航空发动机,2006,32(1):4-4.
|
| [7] |
陈懋章.风扇/压气机技术发展和对今后工作的建议[C]//21世纪航空动力发展研讨会文集.北京:中国航空学会动力专业分会,2000:74-87.
|
| [8] |
邹正平,赵令德,陈懋章,等.叶轮机叶片的三维造型及其对叶片气动负荷的影响[J].航空动力学报,1998,13(3):12-17.ZOU Zhengping,ZHAO Lingde,CHEN Maozhang,et al.Three-dimensional blading and its influence on blade aerodynamic loading[J].Journal of Aerospace Power,1998,13(3):12-17.(in Chinese)
|
| [9] |
Cumpsty N A.Compressor aerodynamics[M].Harlow,Essex,England:Longman Scientific & Technical,1989.
|
| [10] |
Hall E J.Performance prediction of end wall treatment fan rotors with inlet distortion[R].AIAA Paper 9620244.
|
| [11] |
Mazzawy R S.Multiple segment parallel compressor model for circumferential flow distortion[R].AGARD,1977,CP2177.
|
| [12] |
郑宁,邹正平,徐力平.风扇进气畸变三维非定常数值模拟技术研究[J].航空动力学报,2007,22(1):60-65.ZHENG Ning,gOU Zhengping,XU Liping.3-D unsteady numerical simulation of fan/compressor with inlet distortion[J].Journal of Aerospace Power,2007,22(1):60-65.(in Chinese)
|
| [13] |
Gong Y.A computational model for rotating stall and inlet distortions in multi-stage compressors[D].Cambridge,MA:MIT,1998.
|
| [14] |
China R V.A three-dimensional unsteady CFD model of compressor stability[R].ASME 2006-GT-90040.
|
| [15] |
Xu L.Assessing viscous body forces for unsteady calculations[J].Trans.of ASME,Journal of Turbomsehinery,2003,125 (3):425-432.
|
| [16] |
周杨,牛为民,邹正平,等.轮毂封严气体对高压涡轮二次流动影响的数值模拟[J].推进技术,2006,27(6):515-520.ZHOU Yang,NIU Weimin,ZOU Zhengping,et al.Effects of coolant injection from rim seals on secondary flow in a high-pressure turbine[J].Journal of Propulsion Technology,2006,27(6):515-520.(in Chinese)
|
| [17] |
季路成.对转叶轮机技术挑战分析[J].推进技术,2007,28(1):40-44.JI Lucheng.Analysis for technique challenges on counterrotating turbomachinery[J].Journal of Propulsion Technology,2007,28(1):40-44.(in Chinese)
|
| [18] |
方祥军.轴流超跨声高载荷对转新概念涡轮设计探讨[D].北京:北京航空航天大学,2003.FANG Xiangjun.Aerodynamic analysis of supersonic and transonic highly loaded vane less contra-rotating axial new concept turbines[D].Beijing,Beijing University of Aeronautics and Astronautics,2003.(in Chinese)
|
| [19] |
綦蕾,邹正平.对转涡轮内部定常/非定常流动分析[R].北京:北京航空航天大学,2006.
|
| [20] |
Hodson H P.Blade row interactions in low pressure turbines,In:Blade row interference effects in axial t urbomachinery stages[R].VKI Lecture Series 1998-02,1998.
|
| [21] |
叶建,邹正平.低雷诺数下周期性尾迹/层流分离泡相互作用的大涡模拟[J].工程热物理学报,2007,28(2):215-218.YE Jian,ZOU Zhengping.Large-eddy simulation of periodic wake/laminar separation bubble interaction under low reynolds number conditions[J].Journal of Engineering Thermophysics,2007,28(2):215-218.(in Chinese)
|
| [22] |
邹正平,叶建,刘火星,等.低雷诺数低压涡轮内部流动及其气动设计研究进展[C]//第六届动力年会论文集.南京:中国航空学会动力专业分会,2006:293-305.
|
| [23] |
杨琳.低雷诺数低压涡轮内部复杂流动机理及气动设计方法研究[D].北京:北京航空航天大学,2006.YANG Lin.Investigations of complicated flow mechanism and aerodynamic design method in low pressure turbine at low Reynolds number[D].Beijing..Beijing University of Aeronautics and Astronautics,2006.(in Chinese)
|
| [24] |
Bernard L K.Gas turbine technology evolution-a designer's perspective[R].AIAA 2003-2722.
|
| [25] |
梁春华.现代典型军民用涡扇发动机的先进技术[J].航空科学技术,2004,(2):20-23.LIANG Chunhua.Advanced technologies of typical military and commercial turbofan engine[J].Aeronautical Science and Technology,2004,(2):20-23.(in Chinese)
|
| [26] |
DeCastro J A,Melcher K M.A study on the requirements for fast active turbine tip clearance control systems[R].Proceedings of the 40th Joint Propulsion Conference and Exhibit,AIAA-2004-4176,2004.
|
| [27] |
Steinetz B M,Lattime S B,Taylor S,et al.Evaluation of an active clearance control system concept[R].AIAA-2005-3989.
|
| [28] |
Kerrebrock J L,Drela M,Merchant A A,et al.A family of designs for aspirated compressors[R].ASME Paper 98-GT-196.
|
| [29] |
周杨,邹正平,刘火星,等.边界层吹吸气对高负荷扩压叶栅性能的影响[J].推进技术,2007,28:647-652.ZHOU Yang,ZOU Zhengping,LIU Huoxing,et al.Impact on highly-loaded compressor cascade performance due to co-flow jets in boundary layer[J].Journal of Propulsion Technology,2007,28:647-652.(in Chinese)
|
| [30] |
Suder K L,Hathaway M D,Thorp S A,et al.Compressor stability enhancement using discrete tip injection[R].ASME 2000-GT-650.
|
| [31] |
Envia E.Pan noise reduction:An overview[R].NASA/ TM-2001-210699,2001.
|
| [32] |
Brookfield J M.Turbofan rotor/stator interaction noise reduction through trailing edge blowing[D].Cambridge,MA:MIT,1998.
|
| [33] |
Blanco E R,Hall C A,Crichton D.Challenges in the silent aircraft engine design[R].AIAA 2007-454.
|
| [34] |
Jing X D,Sun X F.Experimental investigation of perforated liner with bias flow[J].Journal of the Acoustical Society of America,1999,106(5):2436-2441.
|
| [35] |
Jing X D,Sun X F.Numerical simulation on the nonlinear acoustic properties of an orifice[J].AIAA Journal,2000,38(9):1565-1572.
|
| [36] |
Li X D,Gao J H.Prediction and understanding of three-dimensional screech phenomenon from a circular nozzle[R].AIAA-2007-3637.
|
| [37] |
Heidmann J D,Kassab A J,Divo E A,et al.Conjugate heat transfer effects on a realistic film-cooled turbine vane[R].ASME Paper GT2003-G38553,
|
| [38] |
Montomoli F,Adami F,Gatta S D,et al.Conjugate heat transfer modelling in film cooled blades[R].ASME,GT2004-53177.
|
| [39] |
Bohn D,Bonhoff B,Schonenborn H.Combined aerodynamic and thermal analysis of a turbine nozzle guide vane[R].IGTC-Paper-108,Proceedings of the 1995 Yokohama International Gas Turbine Congress,1995.
|
| [40] |
Bohn D,Krüger U,Kusterer K.Conjugate heat transfer:an advance computational method for the cooling design of modern gas turbine blades and vanes[R].In "Heat Transfer in Gas Turbine",WIT Press,ISBN:1-85312-666-7,2002.
|
| [41] |
Kusterer K,Hagedorn T,Bohn D,et al.Improvement of a film-cooled blade by application of the conjugate calculation technique[J].Journal of Turbomachinery,2008,128 (3):572-578.
|
| [42] |
周驰,冯国泰,王松涛,等.涡轮叶栅气热耦合数值模拟[J].工程热物理学报,2003,24(2):224-227.ZHOU Chi,FENG Guotai,WANG Songtao,et al.Numerical simulation method of heat-flow coupling in turbine cascade[J].Journal of Engineering Thermophysics,2003,24 (2) z224-227.(in Chinese)
|
| [43] |
黄海波.涡轮叶片中流场和温度场计算及实验研究[D].北京:中国科学院研究生院,2002.HUANG Haibo.Numerical and experimental investigation on flow and heat fields in turbine cascade[D].Beijing:Graduate University of Chinese Academy of Sciences,2002.(in Chinese)
|
| [44] |
李宇,邹正平,叶建,等.二维流热耦合数值模拟程序及方法研究[J].燃气涡轮试验与研究,2007,22(2):18-26.LI Yu,ZOU Zhengping,YE Jian,et al.Two-dimensional conjugate heat transfer procedure and method study[J].Gas Turbine Experiment and Research,2007,22(2):18-26.(in Chinese)
|
| [45] |
Wisler D C.The technical and economic relevance of understanding blade row interaction effects in turbomachinery[R].VKI Lecture Ser.,1998-02.
|
| [46] |
Manwaring S R,Wisler D C.Unsteady aerodynamics and gust response in compressor and turbines[J].Trans.of the ASME,1993,115:724-740.
|
| [47] |
张正秋,邹正平.振荡叶栅非定常流动数值模拟[R].北京:北京航空航天大学,2006.
|
| [48] |
Sayma A I,Vahdati M,Imregun M.An integrated nonlinear approach for turbomachinery forced response prediction.Part Ⅰ:Formulation[J].Journal of Fluids and Structures,2000,14:103-125.
|
| [49] |
Vahdati M,Sayma A I,Imregun M.An integrated nonlinear approach for turbomachinery forced response prediction.Part Ⅱ:Case studies[J].Journal of Fluids and Structures,2000,14:103-125.
|
| [50] |
孟越,李琳.李其汉.尾流激振情况下叶片强迫响应瞬态分析方法[J].航空动力学报.2006,32(6):671-674.MENG Yue,LI Lin,LI Qihan.Transient analytical method of vane forcing response under stator-rotor wake influence[J].Journal of Aerospace Power,2006,32(6):671-674.(in Chinese)
|
| [51] |
王梅,江和甫,吕文林.在尾流激振情况下叶片振动应力预估技术[J].航空动力学报,2007,22(4):608-613.WANG Mei,JIANG Hefu,LU Wenlin.Prediction of vane forcing response under wake influence[J].Journal of Aerospace Power,2007,22(4):608-613.(in Chinese)
|
DownLoad: