| Citation: | XIONG Wen-bo, LIU Yu, XIE Kan, LIAO Hui. Application of SolidWorks API of grain burning surface calculation[J]. Journal of Aerospace Power, 2008, 23(8): 1536-1540.
|
| [1] |
王元有.固体火箭发动机设计[M].北京:国防工业出版社,1984.
|
| [2] |
Dunn S S,Coats D E.3-D grain design and ballistic analysis using the SPP97 code[R].AIAA-3340,1997.
|
| [3] |
江洪,魏峥.SolidWorks2003二次开发基础与实例教程[M].北京:电子工业出版社,2003.
|
| [4] |
于胜春,赵汝岩,周红梅,等.基于Pro/E特征造型技术的固体发动机装药燃面计算[J].固体火箭技术,2005,28(2):108-111.YU Shengchun,ZHAO Ruyan,ZHOU Hongmei,et al.Burning area regression simulation and calculation of solid rocket motor grains based on Pro/E feature modeling technology[J].Journal of Solid Rocket Technology,2005,28(2):108-111.(in Chinese)
|
| [5] |
董新刚,陈林泉,侯晓.基于PRO/E平台下的同发装药CAD软件[C]//2002年中国宁航学会固体推进专业委员会年会论文集(上).昆明:中国宇航学会,2002:109-114.
|
| [6] |
杨石林,富婷婷,李健,等.基于SolidWorks平台嵌金属丝药柱装药计算[C]//中国宇航学会固体火箭推进第22届年会论文集.成都:中国宇航学会,2005:62-65.
|
| [7] |
熊文波,刘宇,杨劲松,等.基于SolidWorks二次开发的嵌金属丝药柱燃面计算[J].北京航空航天大学学报,2007,33(12):1400-1403.XIONG Wenbo,LIU Yu,YANG Jinsong,et al.Burning Surface calculation for grain embedded metal wires based on SolidWorks API[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(12):1400-1403.(in Chinese)
|
| [8] |
熊文波,刘宇,杨劲松,等.某嵌金属丝药柱主要装药设计参数的影响[J].固体火箭技术,2008,31(1):38-42.XIONG Wenbo,LIU Yu,YANG Jinsong,et al.Effects of main grain design parameters of an embedded metalwire grain[J].Journal of Solid Rocket Technology,2008,31 (1):38-42.(in Chinese)
|
DownLoad: