| Citation: | WANG Dan-yong, WEN Wei-dong. Damage failure analysis for composite bolted joints with tightening torque subjected to static loadings[J]. Journal of Aerospace Power, 2008, 23(10): 1835-1841.
|
| [1] |
Conti P.Influence of geometic parameters on the stress distribution around a pin-loaded hole in a composite lamihate[J].Composites Science and Technology,1986,25:1-19.
|
| [2] |
Eriksson LI.Contact stresses in bolted joints of composite laminates[J].Composite Structures,1986,6:57-75.
|
| [3] |
Ramamurthy T S.Recent studies on the behaviour of in terference fit pins in composite plates[J].Composite Structures,1989,13:81-99.
|
| [4] |
Whitney J M,Nuismer R J.Stress fracture criteria for 1aminated composites containing stress concentrations[J].Journal of Composite Materials,1974,8;253-265.
|
| [5] |
Chang F K,Chang K Y.Post-failure analysis of bolted composite joints in tension or shear-out mode failure[J].Journal of Composite Materials,1987,21:809-833.
|
| [6] |
Lessard L B,Shokrieh M M.Two-dimensional modeling of composite pinned-joint failure[J].Journal of Composite Materials,1995,29;671-697.
|
| [7] |
Tserpes K I,I.abeas G,Papanikos P,et al.Stength prediction of bolted joints in graphite/epoxy composite laminates[J].Composites:Part B,2002,33:521-529.
|
| [8] |
Cooper C,Turvey G J.Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material[J].Composite Structures,1995,(32):217-226.
|
| [9] |
Matthews F L,Kilty P F,Godwin E W.Load-carrying joints in fibre reinforced plastics[J 3.Plastic and Rubber Process and Application,1982,2:19-25.
|
| [10] |
Kretsis G,Matthews F L.The strength of bolted joints in glass fibre/epoxy laminates[J].Composites,1985,16:92-105.
|
| [11] |
Chen W H,Lee S S,Yeh J T.Three-dimensional contact stress analysis of a composie laminate with bolted joint[J].Composite Structures,1995,30:287-297.
|
| [12] |
王丹勇,温卫东,崔海涛.复合材料单钉接头三维逐渐损伤破坏分析[J].复合材料学报,2005,22(3):168-174.WANG Danyong.WEN Weidong,CUI Haitao.Three-dimension-al progressive damage analysis of single fastener joints in composite laminates[J].Acta Materiae Compositae Sinica,2005,22(3):168-174.(in Chinese)
|
| [13] |
王丹勇,温卫东,崔海涛.含材料非线性的复合材料单钉接头累积损伤分析[J].固体力学学报,2006,27(2):186-190.WANG Danyong,WEN Weidong,CUI Haitao.Progressive damage analysis considering the material nonlinearity of composite laminates containing a hole[J].Acta Mechanica Solida Sinica,2006,27(2):186-190.(in Chinese)
|
| [14] |
Hashin z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47:329-335.
|
| [15] |
王丹勇.层合板接头损伤失效与疲劳寿命研究[D].南京;南京航空航天大学,2006.WANG Danyong.Research on prediction of damage failure and fatigue fife for composite bolted joints[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2006.(in Chinese)
|
| [16] |
汪裕炳,张全纯.复合材料的结构连接[M].北京:国防工业出版社,1992:11-12.
|
| [17] |
王丹勇,温卫东.复合材料单钉接头损伤失效试验[J].航空动力学报,2007,23(2):286-292.WANG Danyong,WEN Weidong.Experiments on damage failure of single bolted joints in composite laminates[J].Journal of Aerospace Power,2007,23(2):286-292.(in Chinese)
|
DownLoad: