| Citation: | HUA Yan-hong, YUAN Wei-xing, YUAN Xiu-gan, YANG Chun-xin, CHEN Jiang. Numerical simulation of the flow-field and performance of amicro-flowrate centrifugal compressor impeller[J]. Journal of Aerospace Power, 2008, 23(10): 1896-1902.
|
| [1] |
叶振帮,常鸿寿.离心式制冷压缩机[M].北京:机械工业出版社,1980:1-11,91-92.
|
| [2] |
于志强,袁卫星.高转速离心式制冷压缩机研究现状及前景[J].制冷与空调,2005,5(3):1-3.YU Zhiqiang,YUAN Weixing.Current state of high rotation speed centrifugal compressor[J].Refrigeration and Air-Conditioning,2005,5(3):1-3.(in Chinese)
|
| [3] |
Krain H.A CAD method for centrifugal compressor impellers[J].Transaction of ASME,Journal of Engineering for Gas Turbines and Power,1984,106(2):150-157.
|
| [4] |
Hathaway M D,Chriss R M,Wood J R,et al.Laser anemometer measurements of the three-dimensional rotor flow field in the NASA Low-Speed centrifugal compressor JR3.NASA Technical Paper 3527,June 1995.
|
| [5] |
席光,王晓锋,蒋三红,等.基于三维粘性流动分析的离心压缩机叶轮设计方法[J].工程热物理学报,2002,23(增刊):55-57.XI Guang,WANG Xiaofeng,JIANG Sanhong,et al.Design method of centrifugal compressor impellers based on 3-D viscous flow analysis[J].Journal of Engineering Thermophysics,2002,23(Supplement):55-57.(in Chinese)
|
| [6] |
初雷哲,杜建-,汤华,等.计及几何参数变化的离心压缩机特性分析[J].工程热物理学报,2006,27(3):405-407.CHU Leizhe,DU Jianyi,TANG Hua,et al.Charcteristic analysis of a centrifugal compressor with different geometry parameters[J].Journal of Engineering Thermophysies,2006,27(3):405-407.(in Chinese)
|
| [7] |
缪骏,谷传纲,王彤,等.PDA技术在离心压缩机叶轮内部流场测量中的应用[J].通用机械,2003,4:66-68.MIU Jun,GU Chuangang,WANG Tong,et al.Application of PDA technique in the measurement of flow field inside centrifugal compressor impellers[J].General Machinery,2003,4:66-68.(in Chinese)
|
| [8] |
杨策,施新.径流式叶轮机械理论及设计[M].北京:国防工业出版社,2004.
|
| [9] |
Gui F L,Reinarts T R,Searnge R P.Design and experimental study of high-speed low-flow-rate centrifugal compressors[R].IECEC Paper No.CT-39,ASME 1995.
|
| [10] |
Hathaway M D,Chriss R M,Wood J R,et al.Esperimental and computational investigation of the NASA lowspeed centrifugal compressor flow field[J].ASME Journalof Turbomachinery,1993,115(3):527-542.
|
| [11] |
张楚华,王宝潼,栾辉宝,等.叶顶间隙对离心叶轮气动性能影响研究EJl.流体机械,2006,34(12):13-16.ZHANG Chuhua,WANG Baotong,LUAN Huibao,et al.Study of influence of tip clearance on aerodynamic performance of centrifugal impeller[J].Fluid Machinery,2006,34(12):13-16.(in Chinese)
|
| [12] |
杨策,马朝臣,王航,等.离心压缩机叶轮设计方法研究进展[J].内燃机工程,2002,23(2):54-59.YANG Ce,MA Chaochen,WANG Hang,et al.Centrifugal compressor design methods progress[J].Chinese Internal Combustion Engine Engineering,2002,23(2):54-59.(in Chinese)
|
DownLoad: