| Citation: | YANG Jian-jun, DENG Xiao-zhong, WEI Bing-yang, FANG Zong-de. Study and experiments of dynamic mechanism of excited gear lapping of spiral bevel gear[J]. Journal of Aerospace Power, 2010, 25(12): 2839-2845.
|
| [1] |
Jiang Q,Gosselin C,Masseth J.Simulation of hypoid gear lapping[J].Journal of Mechanical Design,2008,130(11):112601.(10 pages)
|
| [2] |
Jack M,Mohsen K.Lapping and superfinishing effects on hypoid gears surface finish and transmission errors //Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.Las Vegas,Nevada,USA:ASME,2007.
|
| [3] |
WEI Bingyang,DENG Xiaozhong,FANF Zongde.The lapping mechanism of hypoid gears[J].Journal of Materials Processing Technology,2009,209(6):3001-3008.
|
| [4] |
杨建军,邓效忠,方宗德.螺旋锥齿轮振动研齿系统的拍击响应[J].航空动力学报,2009,24(12):2839-2845. YANG Jianjun,DENG Xiaozhong,FANG Zongde.Rattling response of vibration lapping of sprial bevel gear[J].Journal of Aerospace Power,2009,24(12):2839-2845.(in Chinese)
|
| [5] |
王三民,沈允文,董海军.含间隙和时变啮合刚度的弧齿锥齿轮传动系统非线性振动特性研究[J].机械工程学报,2003,39(2):28-32. WANG Sanmin,SHEN Yunwen,DONG Haijun.Nonlinear dynamical characteristics of a spiral bevel gear system with backlash and time-varying stiffness[J].Chinese Journal of Mechanical Engineering,2003,39(2):28-32.(in Chinese)
|
| [6] |
杨宏斌,高建平,邓效忠,等.弧齿锥齿轮和准双曲面齿轮的非线形动力学研究[J].航空动力学报,2004,19(1):54-59. YANG Hongbin,GAO Jianping,DENG Xiaozhong,et al.Nonlinear dynamics of spiral bevel gears and hypoid gear drives[J].Journal of Aerospace Power,2004,19(1):54-59.(in Chinese)
|
| [7] |
WANG Jun,Lim T C,Li M.Dynamics of a hypoid gear pair considering the effects of time-varying mesh parameters and backlash nonlinearity[J].Journal Sound and Vibration,2007,308(1-2):302-329.
|
| [8] |
WANG Jun.Nonlinear time-varying gear mesh and dynamic analysis of hypoid and bevel geared rotor systems .Cincinnati:The University of Cincinnati,2007.
|
| [9] |
Krenzer T J.Tooth contact analysis of spiral bevel and hypoid gears under load .Rochester,NY:The Gleason Works,Society of Automotive Engineers,1981.
|
| [10] |
魏冰阳,邓效忠,杨建军,等.超声研齿的材料去除机理与试验研究[J].中国机械工程,2006,17(10):995-999. WEI Bingyang,DENG Xiaozong,YANG Jianjun,et al.Study on material removal mechanism and experiments of ultrasonic lapping of gears[J].China Mechanical Engineering,2006,17(10):995-999.(in Chinese)
|
| [11] |
李天兴,邓效忠,魏冰阳.基于一维测头准双曲面齿轮齿面偏差的测量[J].中国机械工程,2007,18(8):958-961. LI Tianxing,DENG Xiaozhong,WEI Bingyang.Tooth surface deviation measurement of hypoid gears based on one-dimensional probe[J].China Mechanical Engineering,2007,18(8):958-961.(in Chinese)
|
| [12] |
曹雪梅,王军,张海英.弧齿锥齿轮齿面误差检测与实验验证[J].中国机械工程,2009,20(15):1799-1801. CAO Xuemei,WANG Jun,ZHANG Haiying.Geometric error measurement of spiral bevel gears and experimental test[J].China Mechanical Engineering,2009,20(15):1799-1801.(in Chinese)
|
DownLoad: