| Citation: | TANG Zi-jie, DING Shui-ting, DU Fa-rong. Simulation of fluid-solid coupled heat transfer of cylinder of a small two-stroke air-cooled aero-engine[J]. Journal of Aerospace Power, 2011, 26(1): 42-47.
|
| [1] |
秦有方.车辆内燃机原理[M].北京:北京理工大学出版社,1997.
|
| [2] |
周龙保.内燃机学[M].北京:机械工业出版社,2000.
|
| [3] |
荆晓东,徐寒清.航空活塞发动机使用[J].中国科技信息,2005(19A):77. JING Xiaodong,XU Hanqing.Use of the aero piston engine[J].China Science and Technology Information,2005(19A):77.(in Chinese)
|
| [4] |
李卫东,赵廷渝.航空活塞动力装置[M].成都:西南交通大学出版社,2004.
|
| [5] |
Morel T,Fort E,Blumberg P.Effect of insulation strategy and design parameters on diesel heat rejection and performance .SAE Trans.850506,1985.
|
| [6] |
XIN Jun,Shih S,Itano E.Integration of 3D combusion simulation and conjugate heat transfer analysis to quantitatively evaluate component temperatures .SAE Paper 2003-01-3128,2003.
|
| [7] |
陶文铨.数值传热学[M].2版.西安:西安交通大学出版社,2004.
|
| [8] |
陈红岩,李迎,俞小莉.柴油机流固耦系统稳态传热数值仿真[J].农业机械学报,2007,38(2):56-60. CHEN Hongyan,LI Ying,YU Xiaoli.Numerical simulation study on steady heat transfer of fluid-solid coupled system in diesel engine[J].Transactions of the Chinese Society for Agricultural Machinery,2007,38(2):56-60.(in Chinese)
|
| [9] |
赵宏国,白敏丽.耦合法在柴油机传热研究中的应用[J].小型内燃机与摩托车,2007,36(6):1-5. ZHAO Hongguo,BAI Minli.Application of coupled methods on heat transfer of diesel engine[J].Small Internal Combustion Engine and Motorcycle,2007,36(6):1-5.(in Chinese)
|
| [10] |
姜明.基于ANSYS的内燃机活塞-缸套耦合系统的传热模拟[J].科学技术与工程,2008,8(6):1437-1440. JIANG Ming.Simulation of coupled methods on heat transfer of internal combustion engine based on ANSYS[J].Science Technology and Engineering,2008,8(6):1437-1440.(in Chinese)
|
| [11] |
陈红岩,李迎,李孝禄.柴油机流固耦合传热仿真研究[J].中国计量学院学报,2006,17(4):284-288. CHEN Hongyan,LI Ying,LI Xiaolu.Simulation study on the fluid-solid coupled heat transfer of diesel engine[J].Journal of China Jiliang University,2006,17(4):284-288.(in Chinese)
|
| [12] |
李迎,俞小莉.发动机冷却系统流固耦合稳态传热三维数值仿真[J].内燃机学报,2007,25(3):252-257. LI Ying,YU Xiaoli.3-D simulation of steady heat transfer of fluid-solid coupled system in engine coolant system[J].Transactions of CSICE,2007,25(3):252-257.(in Chinese)
|
| [13] |
赵立峰,李云清.风冷航空发动机的活塞形状恢复研究[J].航空动力学报,2009,24(10):2255-2259. ZHAO Lifeng,LI Yunqing.Piston reshapes study for the air-cooled engine of aerial vehicle[J].Journal of Aerospace Power,2009,24(10):2255-2259.(in Chinese)
|
| [14] |
钟春敏.内燃机燃烧过程数学模拟的研究现状及其发展[J].科技与经济,2004,6(10):36-38. ZHONG Chunmin.Research on mathematics simulation during the combustion for internal combustion engine[J].Technology and Economy in Aeras of Communications,2004,6(10):36-38.(in Chinese)
|
| [15] |
Woshni G,Fieger J.Determination of local heat transfer coefficients at the piston of a high speed diesel engine by evaluation of measured temperature distribution .SAE Paper 790834,1979.
|
| [16] |
俞小莉,郑飞,严兆大.内燃机气缸体内表面稳态传热边界条件的研究[J].内燃机学报,1987,5(4):324-332. YU Xiaoli,ZHENG Fei,YAN Zhaoda.Study on steady heat transfer condition of cylinder surface in internal combustion engine[J].Transactions of CSICE,1987,5(4):324-332.(in Chinese)
|
| [17] |
郑飞,严兆大.风冷柴油机的传热与热负荷[J].内燃机学报,1985,3(1):77-88. ZHENG Fei,YAN Zhaoda.Study on heat transfer and heat duty of air-cooled engine[J].Transactions of CSICE,1985,3(1):77-88.(in Chinese)
|
| [18] |
朱访君,吴坚.内燃机工作过程数值计算及其优化[M].北京:国防工业出版社,1997.
|
DownLoad: