| Citation: | QUE Xiao-bin, HOU An-ping, ZHOU Sheng. Aerodynamic performance investigation of a compact compression system for turbofan engine[J]. Journal of Aerospace Power, 2011, 26(2): 297-303.
|
| [1] |
Hosny W M,Steenken W G.TF34 engine compression system computer study-simulation of flow stability .NASA-CR-159889,1979.
|
| [2] |
Dawes W N.Multi-blade row Navier-Stokes simulation of fan-bypass configurations .ASME Paper 91-GT-148,1991.
|
| [3] |
Sayma A I.Steady-flow analysis of low pressure compression system for turbofan engines .ASME Paper 2007-GT-27625,2007.
|
| [4] |
Vahdati M,Sayma A I,Freeman C,et al.On the use of atmospheric boundary conditions for axial-flow compressor stall simulations[J].Journal of Turbomachinery,2005,127(2):349-351.
|
| [5] |
Turner M G.Full 3D analysis of the GE90 turbofan primary flowpath .NASA/CR 2000-209951,2000.
|
| [6] |
Turner M G,Ryder R,Norris A.High fidelity 3D turbofan engine simulation with emphasis on turbomachinery-combustor coupling .AIAA 2002-3769,2002.
|
| [7] |
Turner M G,Norris A,Veres J P.High fidelity 3D simulation of the GE90 .AIAA 2003-3996,2003.
|
| [8] |
李晓娟,桂幸民.风扇／增压级设计与非设计性能数值模拟[J].推进技术,2005,26(6):522-525. LI Xiaojuan,GUI Xingmin.Numerical simulation of fan/compressor design and off-design performance[J].Journal of Propulsion Tchnology,2005,26(6):522-525.(in Chinese)
|
| [9] |
李晓娟,桂新民.风扇／增压级带间隙三维粘性流场数值模拟[J].北京航空航天大学报,2006,32(1):4-7. LI Xiaojuan,GUI Xingmin.Numerical simulation of three dimension viscous flow of fan／compressor with tip clearance[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(1):4-7.(in Chinese)
|
| [10] |
赵永辉.涡扇发动机风扇及内外涵道匹配的数值分析 .北京:中国科学院,2005. ZHAO Yonghui.Numerical analysis on matching between internal and external bypass and fan of aero-engine .Beijing:Chinese Academy of Sciences,2005.(in Chinese)
|
| [11] |
WU Hong,LI Qiushi,ZHOU Sheng.Optimization of highly loaded fan rotor based on throughflow model .ASME Paper 2007-GT-27603,2007.
|
| [12] |
YANG Yantao,WU Hong,LI Qiushi,et al.Vorticity dynamics in axial compressor flow diagnosis and design[J].Journal of Fluids Engineering,2008,130(4):1-9.
|
| [13] |
吴宏.高负荷风扇/压气机涡量动力学设计方法的应用研究 .北京:北京航空航天大学,2009. WU Hong.Design method based on vorticity dynamics for highly loaded fan/compressor .Beijing:Beijing University of Aeronautics and Astronautics,2009.(in Chinese)
|
| [14] |
陈玉春,徐思远,刘振德.涡扇发动机加减速控制规律设计的功率提取法[J].航空动力学报,2009,24(4):868-874. CHEN Yuchun,XU Siyuan,LIU Zhende.Power extraction method for acceleration and deceleration control law design of turbofan engine[J].Journal of Aerospace Power,2009,24(4):868-874.(in Chinese)
|
| [15] |
Riegler C,Bauer M,Kurzke J.Some aspects of modeling compressor behavior in gas turbine performance calculations .ASME GT2000-574,2000.
|
| [16] |
Adamczyk J J,Greitzer E M.The role of tip clearance in high-speed fan stall[J].Journal of Turbomachinery,1993,115(1):28-38.
|
DownLoad: