Volume 26 Issue 2
Feb.  2011
Turn off MathJax
Article Contents
SHEN Xiao-long, CHEN Guo-ding, SU Hua. Sealing performances analysis for a herringbone-grooved finger gas seal structure and working parameter[J]. Journal of Aerospace Power, 2011, 26(2): 416-421.
Citation: SHEN Xiao-long, CHEN Guo-ding, SU Hua. Sealing performances analysis for a herringbone-grooved finger gas seal structure and working parameter[J]. Journal of Aerospace Power, 2011, 26(2): 416-421.

Sealing performances analysis for a herringbone-grooved finger gas seal structure and working parameter

  • Received Date: 2009-12-28
  • Rev Recd Date: 2010-06-28
  • Publish Date: 2011-02-28
  • An analysis model of a herringbone-grooved finger gas seal system was presented for its structure and working parameter.The dynamic leakage and dynamic load capacity were subsequently calculated.With this model,analysis and calculation were performed with the change of different herringbone-grooved parameters and working conditions for the sealing performance of the seal.The calculated results indicate that the sealing performance is straightly affected by herringbone-grooved parameters.Rotor speed and windage have different influences on the leakage and load capacity.The above results are validated by comparing with the test data in references,thus providing a better basis for design of the seal.

     

  • loading
  • [1]
    Proctor M P,Delgado I R.Leakage and power loss test results for competing turbine engine seals .NASA TM-2004-213049,2004.
    [2]
    Braun M J,Plerson H M,Kudriavtsev V V.Finger seal solid modeling design and some solid/fluid interaction considerations [J].Triblogy Transactions,2003, 46(4):566- 575.
    [3]
    苏华,陈国定.指尖密封的温度场及热结构耦合分析[J].航空动力学报,2009,24(1):196-203. SU Hua,CHEN Guoding.Analysis of temperature field and coupled thermal and structure for finger seal [J].Journal of Aerospace Power,2009,24(1):196-206.(in Chinese)
    [4]
    Fleming D P.Gas seal pad with herringbone grooved rotor stiffness and load capacity .NASA TM-2006-214133,2006.
    [5]
    Arora G K. Noncontacting finger seal with hydrodynamic foot portion: USA, US5755445 . 1998-05-26.
    [6]
    Arora G K. Dual pressure balanced non-contacting finger seal: USA, US6364316 . 2002-04-02.
    [7]
    Proctor M P,Delgado I R.Preliminary test results of a non-contacting finger seal on a herringbone-grooved Rotor .AIAA Paper 2008-4506,2008.
    [8]
    马晓林,陈国定.基于等效模型的流体动压指尖密封动力学及泄漏量分析[J] .航空学报,2008,29 (5):1356-1363. MA Xiaolin,CHEN Guoding.Dynamic and leakage analysis of padded finger seal base on equivalent model[J].Acta Aeronautica et Astronautica Sinica,2008,29(5):1356-1363.(in Chinese)
    [9]
    张延超,陈国定,申晓龙.指尖密封动态性能分析与泄漏量计算[J].航空学报,2009,30(11):2193-2199. ZHANG Yanchao,CHEN Guoding,SHEN Xiaolong.Analysis of dynamic performance and leakage for finger seal[J].Acta Aeronautica et Astronautica Sinica,2009,30(11):2193-2199.(in Chinese)
    [10]
    安胜利,杨黎明.转子现场动平衡技术[M].北京:国防工业出版社,2007.
    [11]
    顾永泉.流体动密封(下册)[M].北京:石油大学出版社,1990.
    [12]
    航空制造工程手册总编委会.航空制造工程手册[M].北京:航空工业出版社,1996.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1785) PDF downloads(18) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return