| Citation: | HU Hai-feng, BAO Fu-ting, CAI Qiang, LIU Yang. Analysis of thermo-structure for attitude liquid rocket engine in ground test[J]. Journal of Aerospace Power, 2011, 26(2): 442-447.
|
| [1] |
肖泽娟,程惠尔,李鹏.姿控发动机真空深冷环境中传热研究[J].热科学与技术,2005,4(2):101-105. XIAO Zejuan,CHENG Huier,LI Peng.Heat transfer research on gesture control engine in vacuum cryogenic environment [J].Journal of Thermal Science and Technology,2005,4(2):101-105.(in Chinese)
|
| [2] |
张忠利.姿控发动机热防护研究[J].火箭推进,2008,34(3):18-22. ZHANG Zhongli.Investigation on thermal protection for attitude correction liquid rocket engine[J].Journal of Rocket Propulsion,2008,34(3):18-22.(in Chinese)
|
| [3] |
方磊,刘伟.姿控用再生冷却推力室传热特性研究[J].火箭推进,2008,34(6):6-13. FANG Lei,LIU Wei.Research on heat transfer characteristic of regeneratively cooled attitude control engine thrust chamber [J].Journal of Rocket Propulsion,2008,34(3):18-22.(in Chinese)
|
| [4] |
董飞,何国强.铣槽结构液体火箭发动机推力室壳体热应力分析[J].火箭推进,2007,33(3):43-46. DONG Fei,HE Guoqiang.Thermal stress analyses of liquid propellant thruster chamber wall with milled slots[J].Journal of Rocket Propulsion,2007,33(3):43-46.(in Chinese)
|
| [5] |
孙威,方杰,郑力铭,等.N2O微推力器性能及喷管热结构分析[J].火箭推进,2008,34(5):5-9. SUN Wei,FANG Jie,ZHENG Liming,et al.N2O micro-thruster performance and the nozzle thermo-structure analysis[J].Journal of Rocket Propulsion,2008,34(5):5-9.(in Chinese)
|
| [6] |
魏鑫,孙冰,郑力铭,等.超燃冲压发动机进气道表面热结构设计与分析[J].航空动力学报,2008,23(11):1961-1965. WEI Xin,SUN Bing,ZHENG Liming,et al.Design and analysis of thermal structure of inlet of scramjet [J].Journal of Aerospace Power,2008,23(11):1961-1965.(in Chinese)
|
| [7] |
张贵田.高压补燃液氧煤油发动机[M].北京:国防工业出版社,2005.
|
| [8] |
Stechman R C,Oberstone J,Howell J C.Film cooling design criteria for small rocket engines .AIAA-1968-617,1968.
|
| [9] |
张锋,仲伟聪.膜冷却推力室传热计算研究[J].火箭推进,2009,35(4):34-37,48. ZHANG Feng,ZHONG Weicong.Computational investigation of heat transfer for film cooling thrust chamber[J].Journal of Rocket Propulsion,2009,35(4):34-37,48.(in Chinese)
|
| [10] |
ANSYS Inc.Release 11.0 documentation for ANSYS[M]. Canonsburg:ANSYS Inc.,2007.
|
| [11] |
TAN Dongyao.Torsional buckling analysis of thin and thick shells of revolution[J].International Journal of Solids and Structures,2000,37(22):3035-3078.
|
| [12] |
王新敏.ANSYS工程结构数值分析[M].北京:人民交通出版社,2007.
|
| [13] |
尤军锋,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,31(2):173-178. YOU Junfeng,CHEN Ruxun.Buckling analysis on rear dome of solid rocket motor case[J].Journal of Solid Rocket Technology,2008,31(2):173-178.(in English)
|
DownLoad: