| Citation: | QI Hong-yu, LIU Jin-long, YANG Xiao-guang, WANG Jing-ke. Investigation on residual stress of plasma sprayed thermal barrier coatings based on moire interferometry and hole drilling method[J]. Journal of Aerospace Power, 2011, 26(3): 617-621.
|
| [1] |
齐红宇,王亚梅,杨晓光,等.等离子工艺热障涂层的热疲劳分析[J].失效分析与预防,2008,3(1):15-18. QI Hongyu,WANG Yamei,YANG Xiaoguang,et al.Thermal fatigue of atmospheric plasma sprayed thermal barrier coatings[J].Failure Analysis and Prevention,2008,3(1):15-18.(in Chinese)
|
| [2] |
魏洪亮,杨晓光,齐红宇,等.等离子涂层热疲劳失效模式及失效机理研究[J].航空动力学报,2008,23(2):270-275. WEI Hongliang,YANG Xiaoguang,QI Hongyu,et al.Study of failure mode and failure mechanisms on thermal fatigue of plasma sprayed thermal barrier coatings[J].Journal of Aerospace Power,2008,23(2):270-275.(in Chinese)
|
| [3] |
魏洪亮,杨晓光,齐红宇.等离子涂层涡轮导向叶片热疲劳寿命预测研究[J].航空动力学报,2008,23(1):1-8. WEI Hongliang,YANG Xiaoguang,QI Hongyu.Study on thermal fatigue life prediction for plasma sprayed thermal barrier coatings on the surface of turbine vane[J].Journal of Aerospace Power,2008,23(1):1-8.(in Chinese)
|
| [4] |
耿瑞,周柏卓,齐红宇,等.热障涂层结合强度及失效模式研究[J].航空动力学报,2003,18(6):50-53. GENG Rui,ZHOU Baizhuo,QI Hongyu,et al.The bonding strength and failure modes of thermal barrier coatings[J].Journal of Aerospace Power,2003,18(6):50-53.(in Chinese)
|
| [5] |
陈晓鸽,杨树森,张红松,等.大气等离子喷涂ZrO2 与Sm2Zr2O7 热障涂层的残余热应力分析[J].铸造技术,2009,30(9):1148-1152. CHEN Xiaoge,YANG Shusen,ZHANG Hongsong,et al.Analysis of residual thermal stresses of plasma sprayed ZrO2 and Sm2Zr2O7 thermal barrier coatings[J].Foundry Technology,2009,30(9):1148-1152.(in Chinese)
|
| [6] |
亚敏,戴福隆,吕坚.搅拌摩擦焊接头残余应力的试验[J].焊接学报,2002,23(5):53-56. YA Min,DAI Fulong,LV Jian.Study on residual stress of friction stir welding by moiré interferometry and hole-drilling method[J].Transactions of the China Welding Institution,2002,23(5):53-56.(in Chinese)
|
| [7] |
戴福隆,亚敏,谢惠民,等.云纹干涉与钻孔法测量残余应力的实验方法与系统[J].实验力学,2003,18(3):313-318. DAI Fulong,YA Min,XIE Huimin,et al.An experimental method and system for residual stress measurement with moiré interferometry and hole drilling[J].Journal of Experimental Mechanics,2003,18(3):313-318.(in Chinese)
|
| [8] |
Morita Y,Arakawa K,Todo M.Experimental analysis of thermal displacement and strain distributions in a small outline J-leaded electronic package by using wedged-glass phase-shifting moire interferometry[J].Optics and Lasers in Engineering,2008,46(1):18-26.
|
| [9] |
Wood J D,Sobolewski P,Thakur V,et al.Measurement of microstrains across loaded resin-dentin interfaces using microscopic moire interferometry[J].Dental Materials,2008,24(7):859-866.
|
| [10] |
Pignatiello F,de Rosa M,Ferraro P,et al.Measurement of the thermal expansion coefficients of ferroelectric crystals by a moire interferometer[J].Optics Communications,2007,277(1):14-18.
|
| [11] |
Mollenhauer D H,Fredrickson B M,Schoeppner G A,et al.Moire interferometry measurements of composite laminate repair behavior:influence of grating thickness on interlaminar response[J].Composites Part A:Applied Science and Manufacturing,2008,39(8):1322-1330.
|
| [12] |
王亮,王铀,田伟,等.等离子喷涂纳米结构与传统结构热障涂层的残余应力对比研究[J].材料保护,2009,42(3):58-62. WANG Liang,WANG You,TIAN Wei,et al.Comparative study of the residual stress in plasma sprayed nanostructure and conventional structure coatings[J].Materials Protection,2009,42(3):58-62.(in Chinese)
|
| [13] |
常红,姚河省,候丽丽.相移云纹法与盲孔法相结合检测复合材料的残余应力[J].力学季刊,2006,27(3):511-514. CHANG Hong,YAO Hesheng,HOU Lili.Combined phase shift moire interence method with bind hole method to expect composite materials' residual stress[J].Chinese Quarterly of Mechanics,2006,27(3):511-514.(in Chinese)
|
| [14] |
朱甫金,陶宝祺.小孔法测量正交各向异性材料残余应力[J].复合材料学报,1998,15(2):93-97. ZHU Pujin,TAO Baoqi.Measurement of residual stresses in orthotropic materials by the hole drilling method[J].Acta Materiea Compositae Sinica,1998,15(2):93-97.(in Chinese)
|
| [15] |
航空材料研究院.航空发动机设计用材料数据活页手册[M].北京:中国航空发动机总公司,2000.
|
DownLoad: