Volume 26 Issue 4
Apr.  2011
Turn off MathJax
Article Contents
FAN Jiang, ZENG Wei-wei, WANG Rong-qiao, SHEN Xiu-li, CHEN Zhi-ying. Optimization design of the turbine blade shroud based on iSIGHT software[J]. Journal of Aerospace Power, 2011, 26(4): 745-751.
Citation: FAN Jiang, ZENG Wei-wei, WANG Rong-qiao, SHEN Xiu-li, CHEN Zhi-ying. Optimization design of the turbine blade shroud based on iSIGHT software[J]. Journal of Aerospace Power, 2011, 26(4): 745-751.

Optimization design of the turbine blade shroud based on iSIGHT software

  • Received Date: 2010-03-08
  • Rev Recd Date: 2010-06-22
  • Publish Date: 2011-04-28
  • Based on the established turbine blade shroud parametric model,this article choosed iSIGHT as an optimization platform,and employed the model building software and finite element method (FEM) software to construct the procedure of the shroud optimization.It successfully reduced the shroud's mass (at least 1.0%) on the condition of keeping its structural strength by use of this procedure.In addition,this research shows some relationships among different parameters’ combinations,such as the included angle α and the pressure on the damp faces.It also provides an effective method to design and optimize the similar complicated models.

     

  • loading
  • [1]
    孟憬非,黄庆南,赵光电,等.某型发动机新件涡轮叶片叶冠掉块故障分析[J].航空发动机,2006,32(2):17-22. MENG Jingfei,HUANG Qingnan,ZHAO Guangdian,et al.Failure analysis of turbine blade shroud loss for an aeroengine[J].Aeroengine,2006,32(2):17-22.(in Chinese)
    [2]
    李桂英,闻雪友,李东明,等.燃气轮机带冠涡轮动叶故障分析及改进[J].热能动力工程,2008,23(1):28-31. LI Guiying,WEN Xueyou,LI Dongming,et al.Failure analysis and improving of turbine blade with shroud for a gas turbine[J].Journal of Engineering for Thermal Energy and Power,2008,23(1):28-31.(in Chinese)
    [3]
    《航空发动机设计手册》总编委会.航空发动机设计手册(第10册):涡轮[M].北京:航空工业出版社,2001.
    [4]
    汤凤,孟光.带冠涡轮叶片的接触分析[J].噪声与振动控制,2005(4):5-7,17. TANG Feng,MENG Guang.Contact analysis of shrouded turbine blade[J].Noise and Vibration Control,2005(4):5-7,17.(in Chinese)
    [5]
    郑君,罗贵火.某型发动机涡轮盘片叶冠有限元边界条件的计算对比分析[J].振动工程学报,2004,17(增刊):110-112. ZHENG Jun,LUO Guihuo.Finite element method contrast and analysis of turbine with different blases’ boundary conditions[J].Journal of Vibration Engineering,2004,17(supl.):110-112.(in Chinese)
    [6]
    朱永新.带冠叶片摩擦减振特性研究 .南京:南京航空航天大学,2007. ZHU Yongxin.Research on characteristic of the forced response of shrouded blades .Nanjing:Nanjing University of Aeronautics and Astronautics,2007.
    [7]
    杨鑫.带冠涡轮叶片动力响应设计技术研究 .北京:北京航空航天大学,2008. YANG Xin.Study on design technology of dynamic response of shrouded turbine blade .Beijing:Beijing University of Aeronautics and Astronautics,2008.
    [8]
    Porreca L,Kalfas A I,Abhari R S.Optimized shroud design for axial turbine aerodynamic performance[J].Journal of Turbomachinery,2008,130(3):031016.1-031016.12.
    [9]
    Porreca L,Behr T,Schlienger J,et al.Fluid dynamics and performance of partially and fully shrouded axial turbines[J].Journal of Turbomachinery,2005,127(4):668-678.
    [10]
    田文正,王荣桥.基于MDO体系的涡轮叶片热-结构耦合分析[J].航空发动机,2008,34(2):5-9,12. TIAN Wenzheng,WANG Rongqiao.Coupled thermal-structural analysis of turbine blade based on MDO system[J].Aeroengine,2008,34(2):5-9,12.(in Chinese)
    [11]
    蔡显新,尹泽勇,高德平.航空发动机涡轮叶片的多学科设计优化[J].航空动力学报,2004,20(5):795-801. CAI Xianxin,YIN Zeyong,GAO Deping.MDO technology applied to the aeroengine turbine blade design[J].Journal of Aerospace Power,2004,20(5):795-801.(in Chinese)
    [12]
    EGD-3斯贝MK202发动机应力标准[M].丁爱祥,吴君,译.北京:国际航空编辑部,1979.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1868) PDF downloads(25) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return