| Citation: | LU Wen, NIE Chao-qun, LIN Feng. Investigation of a new combined type compressor's feasibility[J]. Journal of Aerospace Power, 2011, 26(5): 1111-1117.
|
| [1] |
周支柱.大功率发电用燃气轮机的发展概况[J].发电设备,2010,24(1):6-11. ZHOU Zhizhu.Development status of large capacity gas turbines for power generation[J].Power Equipment,2010,24(1):6-11.(in Chinese)
|
| [2] |
糜洪元.国内外燃气轮机发电技术的发展现况与展望[J].电力设备,2006,7(10):8-10. MI Hongyuan.Development and prospect of gas turbine generation technology both in domestic and international[J].Electrical Equipment,2006,7(10):8-10.(in Chinese)
|
| [3] |
陈矛章.风扇/压气机技术发展和对今后工作的建议[J].航空动力学报,2002,17(1):1-15. CHEN Maozhang.Development of fan/compressor techniques and suggestions on further researches[J].Journal of Aerospace Power,2002,17(1):1-15.(in Chinese)
|
| [4] |
吴玉林,陈庆光,刘树红.通风机和压缩机[M].北京:清华大学出版社,2005.
|
| [5] |
方昌德.航空发动机的发展历程[M].北京:航空工业出版社,2007.
|
| [6] |
方昌德.美国综合高性能涡轮发动机技术计划和我国的对策 .北京:中国航空工业发展研究中心,HY99018,1999.
|
| [7] |
卢新根,楚武利,朱俊强,等.轴流压气机机匣处理研究进展及评述[J].力学进展,2006,36(2):222-232. LU Xingen,CHU Wuli,ZHU Junqiang,et al.A review of studies on casing treatment of axial-flow compressor[J].Advances in Mechanics,2006,36(2):222-232.(in Chinese)
|
| [8] |
童志庭,聂超群,朱俊强.微喷气提高轴流压气机稳定性的研究[J].工程热物理学报,2006,27(1):121-124. TONG Zhiting,NIE Chaoqun,ZHU Junqiang.Investigation on miro tip injection improving the stability of an axial compressor[J].Journal of Engineering Thermophysics,2006,27(1):121-124.(in Chinese)
|
| [9] |
徐立华.船舶柴油机[M].哈尔滨:哈尔滨工程大学出版社,2006.
|
| [10] |
Boger K M,King P I,Copenhaver W W.Stall inception in single stage high-speed compressor with straight and swept leading edges .AIAA 93-1870,1993.
|
| [11] |
Sparks C R.On the transient interaction of centrifugal compressors and their piping systems .ASME Paper 83-GT-236,1983.
|
| [12] |
舒士甄,朱力,柯玄龄,等.叶轮机械原理[M].北京:清华大学出版社,1999.
|
| [13] |
Anderson J D.Modern compressible flow with historical perspective[M].New York:McGraw-Hill,2003.
|
DownLoad: