Volume 26 Issue 5
May  2011
Turn off MathJax
Article Contents
CHEN Wei, DU Fa-rong, DING Shui-ting, HAN Shu-jun, LI Yun-qing. Research on vibration absorber for a super-high speed rotor system[J]. Journal of Aerospace Power, 2011, 26(5): 1135-1141.
Citation: CHEN Wei, DU Fa-rong, DING Shui-ting, HAN Shu-jun, LI Yun-qing. Research on vibration absorber for a super-high speed rotor system[J]. Journal of Aerospace Power, 2011, 26(5): 1135-1141.

Research on vibration absorber for a super-high speed rotor system

  • Received Date: 2010-03-16
  • Rev Recd Date: 2010-07-01
  • Publish Date: 2011-05-28
  • A kind of freely assembled dry friction vibration absorber was presented to solve the problems of instability and rubbing faults for a super-high speed rotor system based on theory of dry friction dissipating energy from rotor vibration.In this structure,a wave-shaped elastic pad and some dry friction pads were freely assembled on shaft,and axial normal force was provided for elastic pad and dry friction pads by pre-loaded moment for nut.When friction pads moved with shaft,the relative movements between them could dissipate vibration energy from rotor system,absorb vibration and enhance system stability.The configuration format meeting the stability in engineering for the damper of the studied rotor system has been acquired by testing different groups of dry friction pads and pre-loaded moment.The results show that dry friction damper is suitable for high speed and light loaded rotor system to restrain vibration and enhance its stability.The testing routine is helpful to find a comfortable configuration format in engineering of dry friction damper.

     

  • loading
  • [1]
    范天宇.弹性支撑干摩擦阻尼器减振研究 .西安:西北工业大学,2006. FAN Tianyu,Vibratiom reduction by elastic support dry friction damper .Xi'an:Northwestern Polytechnical University.2006.(in Chinese)
    [2]
    周年发.某型发动机的减振与监控方法分析[J].航空发动机,2007(增刊):23-27. ZHOU Nianfa.Analysis for a engine vibration reduction and detection method[J].Aeroengine,2007(supplement):23-27.(in Chinese)
    [3]
    何衍宗.柔性转子受简谐扭矩激励时的涡动[J].振动工程学报,1991,4(3):1-9. HE Yanzong.Whirling of a flexible rotor excited by harmonic torque[J].Journal of Vibration Engineering,1991,4(3):1-9.(in Chinese)
    [4]
    闻邦椿,顾家柳,夏松波,等.高等转子动力学[M].北京:机械工业出版社,2000.
    [5]
    Rodriguez C G,Egusquiza E,Santos I F.Frequencies in the vibration induced by the rotor stator interaction in a centrifugal pump turbine[J].Journal of Fluid Engineering,2007,129(11):1428-1435.
    [6]
    Green I,Casey C.Crack detection in a rotor dynamic system by vibration monitoring Part Ⅰ:analysis[J].Journal of Engineering for Gas Turbines and Power,2005,127(2):425-436.
    [7]
    夏兆旺,单颖春,刘献栋,等.颗粒阻尼应用于平板叶片减振试验[J].振动测试与诊断.2008,30(3):269-272. XIA Zhaowang,SHAN Yingchun,LIU Xiandong,et al.Particle damping tests on cast steel plates[J].Journal of Vibration,Measurement & Diagnosis,2008,30(3):269-272.(in Chinese)
    [8]
    Lopez I,Busturia J M,Nijmeijer H.Energy dissipation of a friction damper[J].Journal of Sound and Vibration,2004,278(3):539-561.
    [9]
    Den Hartog J P.Forced vibrations with combined coulomb and viscous friction[J].Applied Mechan.J.AMSE,1931,53:107-115.
    [10]
    Pratt T K,Williams R.Nonlinear analysis of stick/slip motion[J].Journal of Sound and Vibration,1981,74(4):531-542.
    [11]
    Akay A.Acoustics of friction[J].Journal of the Acoustical Society of America,2002,11(4):1525-1548.
    [12]
    Beards C F,WoowatA.The control of frame vibration by friction damping in joints[J].Journal of Vibration,Acoustics Stress and Reliability in Design,1985,107(1):27-32.
    [13]
    Deimling K,Szilgyi P.Periodic solutions of dry-friction problems[J].Zeitschrift für Angewandte Mathematik und Physik(ZAMP),1994,45(1):53-60.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1811) PDF downloads(18) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return