Volume 26 Issue 5
May  2011
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2011  >  26(5): 1194-1200
LI Tian-xing, DENG Xiao-zhong, LI Ju-bo, YANG Jian-jun. Automatic feedback correction and deviation analysis for tooth surface of spiral bevel and hypoid gear[J]. Journal of Aerospace Power, 2011, 26(5): 1194-1200.
Citation: LI Tian-xing, DENG Xiao-zhong, LI Ju-bo, YANG Jian-jun. Automatic feedback correction and deviation analysis for tooth surface of spiral bevel and hypoid gear[J]. Journal of Aerospace Power, 2011, 26(5): 1194-1200.
shu

Automatic feedback correction and deviation analysis for tooth surface of spiral bevel and hypoid gear

  • 1.

    School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 71007

  • 2.

    School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang Henan 47100

  • 3.

    School of Mechanical Engineering, Jiangsu University, Zhenjiang Jiangsu 212013, China

  • Received Date: 2010-04-25
  • Rev Recd Date: 2010-06-21
  • Publish Date: 2011-05-28
    Abstract
  • Based on the measurement information of tooth surface,the deviations and influential factors were identified and analyzed,and the corresponding relations between the machine-tool motion parameters and the tooth surface deviation were derived.An automatic identification system was developed to determine the deviation type and the corrected items of machine-tool motion parameters.By the model of 4-axis computerized numerical control (CNC) cutting machine and the application of numerical optimization method,the automatic correction and feedback were realized via the network between the measuring center and the cutting machine.Experiments and applications show that the expected results of effective reduction of tooth surface deviation can be achieved,the tooth surface accuracy can meet the design requirements,and the digital closed-loop manufacturing of spiral bevel and hypoid gear can be carried out effectively by means of automatic feedback correction of machine-tool motion parameters and automatic identification of tooth surface.

     

    • FullText(HTML)
  • loading
    • References(12)
  • [1]
    邓效忠,方宗德,魏冰阳,等.高重合度弧齿锥齿轮的性能分析与实验研究[J].航空动力学报,2003,18(6):744-748. DENG Xiaozhong,FANG Zongde,WEI Bingyang,et al.Analysis of meshing behavior and experiments of spiral bevel gears with high contact ratio[J].Journal of Aerospace Power,2003,18(6):744-748.(in Chinese)
    [2]
    樊奇,让·德福.格里森专家制造系统(GEMS)开创弧齿锥齿轮及双曲面齿轮数字化制造新纪元[J].世界制造技术与装备市场,2005(4):87-93. Fan Q,Ron D.Gleason expert manufacturing system (GEMS) opens a new era for digitized manufacturing of spiral bevel and hypoid gears[J].World Manufacturing Engineering & Market,2005(4):87-93.(in Chinese)
    [3]
    Tobisawa K,Kano M,Saiki K,et al.Real tooth contact analysis of loaded hypoid gear directly using measured tooth surfaces[J].Review of Automotive Engineering,2006,27(2):317-324.
    [4]
    Takeda R,Wang Z H,Kubo A,et al.Performance analysis of hypoid gears by tooth flank form management[J].Gear Technology,2002,19(4):26-30.
    [5]
    王军,王小椿,姜虹.螺旋锥齿轮齿面的三坐标测量[J].机械工程学报,2003,39(6):151-154. WANG Jun,WANG Xiaochun,JIANG Hong.Coordinate measurement of tooth surface of spiral bevel gear[J].Chinese Journal of Mechanical Engineering,2003,39(6):151-154.(in Chinese)
    [6]
    Simon V.Computer simulation of tooth contact analysis of mismatched spiral bevel gears[J].Mechanism and Machine Theory,2007,42(3):365-381.
    [7]
    王志永,曾韬.弧齿锥齿轮基于比例修正参数的齿形误差修正[J].机械工程学报,2010,46(1):43-47. WANG Zhiyong,ZENG Tao.Correction of tooth flank errors of spiral bevel gear based on proportional change parameters[J].Chinese Journal of Mechanical Engineering,2010,46(1):43-47.(in Chinese)
    [8]
    李敬财,王太勇,范胜波,等.基于数字化制造的螺旋锥齿轮齿面误差修正[J].农业机械学报,2008,39(5):174-185. LI Jingcai,WANG Taiyong,FAN Shengbo,et al.Error corrections of spiral bevel gear tooth surface based on digitized manufacturing[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(5):174-185.(in Chinese)
    [9]
    唐进元,卢延峰,周超.调整参数误差对齿面接触质量的影响[J].航空动力学报,2008,23(9):1718-1723. TANG Jinyuan,LU Yanfeng,ZHOU Chao.Effect of machine tool adjustment parameter errors on spiral bevel gears tooth contact quality[J].Journal of Aerospace Power,2008,23(9):1718-1723.(in Chinese)
    [10]
    李天兴,邓效忠,魏冰阳.基于一维测头准双曲面齿轮齿面偏差的测量[J].中国机械工程,2007,18(8):958-962. LI Tianxing,DENG Xiaozhong,WEI Bingyang.Tooth surface deviation measurement of hypoid gears based on one-dimensional probe[J].China Mechanical Engineering,2007,18(8):958-962.(in Chinese)
    [11]
    Litvin F L,Fuentes A.Gear geometry and applied theory[M].United Kingdom:Cambridge University Press,2004.
    [12]
    李聚波,邓效忠,徐爱军,等.异构数控系统的网络化集成制造技术[J].农业机械学报,2009,40(7):192-196. LI Jubo,DENG Xiaozhong,XU Aijun,et al.Networked integration manufacturing based on different numerical control systems[J].Transactions of the Chinese Society for Agricultural Machinery,2009,40(7):192-196.(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(1171.0KB)
    XML

    Article Metrics

    Article views (1861) PDF downloads(22) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return