| Citation: | ZHANG Bo, LI Ji-bao, JI Hong-hu, SHANG Shou-tang, CHENG Ming, WANG Yan-li. Numerical and experimental investigation on effect of distance between impingement and effusion plates on heat transfer characteristics of impingement-effusion composite cooling[J]. Journal of Aerospace Power, 2011, 26(8): 1713-1718.
|
| [1] |
Mellor A M.Design of modern gas turbine combustor[M].New York:Academic Press,1990.
|
| [2] |
李继保,胡正义.高温升高热容燃烧室设计技术分析[J].燃气涡轮试验与研究,2000,13(4):5-8.
|
| [3] |
胡娅萍,吉洪湖.孔阵排列疏密度对致密多孔壁冷却效果的影响[J].推进技术,2005,26(1):28-33. HU Yaping, JI Honghu.Effect of porosity of holes array on cooling effectiveness of effusion cooling[J].Journal of Propulsion Technology,2005,26(1):28-33.(in Chinese)
|
| [4] |
Myers G,Geest J V D.Comparison of advanced cooling concepts using color thermography.AIAA 85-1289,1985.
|
| [5] |
Andrews G E,Asere A A.Full coverage discrete hole film cooling:the influence of the number of holes and pressure loss.ASME 90-GT-61,1990.
|
| [6] |
Andrews G E,Bazdidi-Tehrahi F.Small diameter film cooling heat transfer:the influence of the holes length.ASME 91-GT-344,1991.
|
| [7] |
张勃,李继保,吉洪湖.开孔面积比对冲击-多斜孔壁复合冷却形式冷却特性影响的数值模拟研究[J].航空动力学报,2009,24(10):2235-2240. ZHANG Bo,LI Jibao,JI Honghu.Effect of area ratio of impingement hole to effusion hole on heat transfer characteristics of impingement-effusion composite cooling[J].Journal of Aerospace Power,2009,24(10):2235-2240.(in Chinese)
|
| [8] |
张勃,李继保,吉洪湖.冲击多斜孔壁中冲击孔与多斜孔相对开孔位置对换热特性的影响[J].南京航空航天大学学报,2011,43(1):25-29. ZHANG Bo,LI Jibao,JI Honghu.Effect of relative position of impinging hole to effusion hole on heat transfer characteristics of impinging/effusion composite cooling[J].Journal of Nanjing University of Aeronautics and Astronautics,2011,43(1):25-29.(in Chinese)
|
| [9] |
林宇震,俞文利,刘高恩,等.冲击加发散双层壁冷却方式压降分配对斜孔内对流换热影响的研究[J].航空学报,2003,24(2):97-101. LIN Yuzhen,YU Wenli,LIU Gaoen,et al.Influence of pressure drop distribution on the convection heat transfer inside the inclined hole of impingement/effusion cooling[J].Acta Aeronautica et Astronautica Sinca,2003,24(2):97-101.(in Chinese)
|
| [10] |
许全宏,林宇震,刘高恩.冲击加多斜孔双层壁冷却方式冲击传热系数[J].大连理工大学学报,2001,41(1):63-66. XU Quanhong,LIN Yuzhen,LIU Gaoen.Heat transfer coefficient of impingement/effusion double wall cooling method[J].Journal of Dalian University of Technology,2001,41(1):63-66.(in Chinese)
|
| [11] |
Gerendas M,Hoeschler K,Schilling T.Development and modeling of angled effusion cooling for the BR715 low emission staged combustor core demonstrator. ADA419282,2001.
|
| [12] |
Sellers J P,Jr.Gaseous film cooling with multiple injection stations[J].AIAA Journal,1963,1(9):2154-2156.
|
DownLoad: