| Citation: | LI Guo, HAN Shu-jun, DING Shui-ting, DU Fa-rong. Complex lubrication and cooling technology of rolling bearing on micro aero-engines[J]. Journal of Aerospace Power, 2011, 26(8): 1736-1743.
|
| [1] |
郑龙席,王茉瑚.油雾润滑在微型航空涡轮发动机上的应用[J].润滑与密封,2003(4):87-89. ZHENG Longxi,WANG Mohu.Application of oil mist lubrication technology on micro turbo engine[J].Lubrication Engineering,2003(4):87-89.(in Chinese)
|
| [2] |
田爱华,王毅间,关金贵,等.气液两相流体润滑技术在滚动轴承中的试验研究[J].吉林化工学院学报,2003,20(3):73-75. TIAN Aihua,WANG Yijian,GUAN Jingui,et al.Experimental study on the bubbly liquid lubrication technology in the spindle bearing[J].Journal of Jilin Institute of Chemical Technology,2003,20(3):73-75.(in Chinese)
|
| [3] |
Prince M J,Blanch H W.Bubble coalescence and break-up in air-sparged bubble columns[J].AIChE Journal,1990,36(10):1485-1499.
|
| [4] |
Lee C W,Palma P C,Simmons K,et al.Comparison of computational fluid dynamics and particle image data for the airflow in an aeroengine bearing chamber[J].Transactions of the ASME,Journal of Engineering for Gas and Turbines Power,2005,127(10):697-703.
|
| [5] |
杨和中,刘厚飞.Turbolub油气润滑技术(一)[J].润滑与密封,2003(1):107-110. YANG Hezhong,LIU Houfei.Turbolub oil-air lubrication technology Part 1[J].Lubrication Engineering,2003(1):107-110.(in Chinese)
|
| [6] |
吴昊天,陈国定.轴承腔油气两相泡沫流动的数值研究[J].机械工程学报,2008,44(9):70-75. WU Haotian,CHEN Guoding.Numerical research on two-phase gas/oil bubble flow in bearing chamber[J].Chinese Journal of Mechanical Engineering,2008,44(9):70-75.(in Chinese)
|
| [7] |
吴昊天,陈国定.气液两相流对发动机主轴承润滑性能影响的分析[J].机械科学与技术,2007,26(2):217-220. WU Haotian,CHEN Guoding.Influence of gas/liquid two-phase flow on lubrication performance of an engine bearing[J].Mechanical Science and Technology,2007,26(2):217-220.(in Chinese)
|
| [8] |
Maqableh A,Simmons K,Hibberd S,et al.CFD modeling of three-component air/oil flow and heat transfer in a rotating annulus //Proceedings of the 11th International Conference of CFD.Vancouver,Canada:IME,2003:192-200.
|
| [9] |
Busam S,Glahn A,Witting S.Internal bearing chamber wall heat transfer as a function of operating conditions and chamber geometry[J].Transactions of the ASME,Journal of Engineering for Gas Turbines and Power,2000,122(4):314-320.
|
| [10] |
何立东,闫通海,王凡.气液两相流体润滑机理的试验研究[J].润滑与密封,1996(1):33-36. HE Lidong,YAN Tonghai,WANG Fan.Experimental study on lubrication mechanism of bubby liquid[J].Lubrication Engineering,1996(1):33-36.(in Chinese)
|
| [11] |
Glahn A,Witting S.Two-phase flow in aero engine bearing chambers:characterization of oil film flows[J].Transactions of the ASME,Journal of Engineering for Gas and Turbines Power,1996,118(7):578-583.
|
| [12] |
康宁,曾文彬.空气压力对油雾发生器雾化特性的影响[J].润滑与密封,2009,34(8):14-16. KANG Ning,ZENG Wenbin.Effect of air pressure on mist characteristics of oil mist lubrication device[J].Lubrication Engineering,2009,34(8):14-16.(in Chinese)
|
| [13] |
康宁,曾文彬.温度及油温对油雾发生器雾化特性的影响[J].润滑与密封,2009,34(12):14-17. KANG Ning,ZENG Wenbin.Effect of air temperature and oil temperature on mist characteristics of oil mist lubrication device[J].Lubrication Engineering,2009,34(12):14-17.(in Chinese)
|
| [14] |
ANSYS,Inc.Multiphase flow modeling[M]//ANSYS CFX-Solver Modeling Guide ANSYS CFX Release 11.0.Canonsburg,PA:ANSYS,Inc.,2006:141-178.
|
| [15] |
ANSYS,Inc.Multiphase flow theory[M]//ANSYS CFX-Solver Theory Guide ANSYS CFX Release 11.0.Canonsburg,PA:ANSYS,Inc.,2006:123-184.
|
| [16] |
Astridge D G,Smith C F.Heat generation in high-speed cylindrical roller bearings //Proceedings of the Institute of Mechanical Engineers,Elasto-hydrodynamic Lubrication.Leeds,UK:IME,1973:83-94.
|
| [17] |
刘志全,张永红,苏华.高速滚动轴承热分析[J].润滑与密封,1998(4):66-68. LIU Zhiquan,ZHANG Yonghong,SU Hua.Thermal analysis of high speed rolling bearings[J].Lubrication Engineering,1998(4):66-68.(in Chinese)
|
DownLoad: