| Citation: | WANG Zhen-xing, QIU Ming-xing, WANG Jian-jun. Sealing performance of pipeline connection under the tensile load[J]. Journal of Aerospace Power, 2011, 26(8): 1866-1870.
|
| [1] |
彭艳萍,曾凡昌,王俊杰,等.国外航空钛合金的发展应用及其特点分析[J].材料工程,1997(10):3-6. PENG Yanping,ZENG Fanchang,WANG Junjie,et al.Development,application and feature of titanium alloys in foreign aviation industry[J].Journal of Materials Engineering,1997(10):3-6.(in Chinese)
|
| [2] |
Adib A M L,Baptista C A R,Barboza M J R,et al.Aircraft engine bleed system tubes:material and failure mode analysis[J].Engineering Failure Analysis,2007,14(8):1605-1617.
|
| [3] |
李松梅,蒋唯沧,刘建华,等.新型航空T-31钛合金导管连接件在模拟服役环境中的抗腐蚀性能研究[J].材料工程,2004(2):32-36. LI Songmei,JIANG Weicang,LIU Jianhua,et al.Study on corrosion resistance of aircraft conduit connector of T-31 titanium alloy at simulated service environment[J].Journal of Materials Engineering,2004(2):32-36.(in Chinese)
|
| [4] |
李松梅,刘建华,孙忠志,等.模拟服役环境中航空导管连接件耐蚀性能研究[J].北京航空航天大学学报,2005,31(4):430-433. LI Songmei,LIU Jianhua,SUN Zhongzhi,et al.Study on corrosion resistance of aircraft conduit connector at simulated service environment[J].Journal of Beijing University of Aeronautics and Astronautics,2005,31(4):430-433.(in Chinese)
|
| [5] |
王小刚,张方晓,黄鹏.基于ANSYS的管路锥形密封结构参数分析[J].兵工自动化,2009,28(8):25-27. WANG Xiaogang,ZHANG Fangxiao,HUANG Peng.Analysis of parameters of pipeline cone sealing structures based on ANSYS[J].Ordnance Industry Automation,2009,28(8):25-27.(in Chinese)
|
| [6] |
王小刚,张方晓,黄鹏.基于ANSYS的锥头-锥孔管路锥形密封结构分析[J].机械,2009,36(8):37-40. WANG Xiaogang,ZHANG Fangxiao,HUANG Peng.Design of cone-head & cone-hole pipeline cone sealing structure based on ANSYS[J].Machinery,2009,36(8):37-40.(in Chinese)
|
| [7] |
冉光斌,张方晓.双锥形接头密封管路联接结构的稳健设计[J].润滑与密封,2008,33(5):88-90. RAN Guangbin,ZHANG Fangxiao.Robust design method of the sealing pipeline joint structure with double-cone pipe union[J].Lubrication Engineering,2008,33(5):88-90.(in Chinese)
|
| [8] |
张淼,孟庆春,张行.无扩口管路连接件疲劳寿命预估的损伤力学-有限元法[J].航空学报,2009,30(3):435-443. ZHANG Miao,MENG Qingchun,ZHANG Xing.Damage mechanics-finite element method for fatigue life prediction of flare-free pipeline connection assemblies[J].Acta Aeronautica et Astronautica Sinica,2009,30(3):435-443.(in Chinese)
|
| [9] |
李俊昇,罗建平,孙忠志,等.HB5966-2008 24°无扩口导管连接件通用规范[S].北京:中国航空综合技术研究所,2008:1-14.
|
| [10] |
李会勋,胡迎春,张建中.利用ANSYS模拟螺栓预紧力的研究[J].山东科技大学学报,2006,25(1):57-59. LI Huixun,HU Yingchun,ZHANG Jianzhong.Study on simulating bolt pretension by using ANSYS[J].Journal of Shandong University of Science and Technology,2006,25(1):57-59.(in Chinese)
|
| [11] |
祖炳辉,付光琦,徐玉梁,等.车用柴油机缸孔在缸盖螺栓预紧力下变形的数值模拟和试验研究[J].内燃机工程,2010,37(2):98-104. ZU Binghui,FU Guangqi,XU Yuliang,et al.Numerical simulation and expermental investigation on cylinder bore deformation of automotive diesel engines under cylineder-head bolt pretightened[J].Chinese Internal Combustion Engine Engineering,2010,37(2):98-104.(in Chinese)
|
| [12] |
李婕,蔡纪宁,张秋翔,等.机械密封环过盈联接的有限元分析[J]. 润滑与密封,2009,34(8):62-65. LI Jie,CAI Jining,ZHANG Qiuxiang,et al.The finite element analysis of interference fit in mechanical seal ring[J].Lubrication Engineering,2009,34(8):62-65.(in Chinese)
|
| [13] |
周鹤群,汪中厚,谢云波,等.基于FEA的传动轴过盈配合精密分析[J].机械传动,2010,34(1):60-65. ZHOU Hequn,WANG Zhonghou,XIE Yunbo,et al.Precision analysis of interference fits for drive shaft based on FEA[J].Journal of Mechanical Transmission,2010,34(1):60-65.(in Chinese)
|
DownLoad: