| Citation: | DU Hui, TENG Jin-fang. Study on the flow mechanisms of casing treatment on a transonic single stage axial-flow compressor[J]. Journal of Aerospace Power, 2011, 26(9): 2089-2094. |
| [1] |
Pundhir D S,Sharma P B.Effect of casing treatment on aerodynamic performance of a contra-rotating axial compressor stage[J].Proceedings of the Institution of Mechanical Engineers,1990,240(1):46-55.
|
| [2] |
Fujita H,Takata H.A study on configurations of casing treatment for axial flow compressors[J].Bulletin of the JSME,1984,27(230):1675-1681.
|
| [3] |
楚武利,朱俊强,刘志伟.折线斜缝式机匣处理的实验研究及机理分析[J].航空动力学报,1999,14(3):270-274. CHU Wuli,ZHU Junqiang,LIU Zhiwei.Experimental research and analysis of sloped slotted casing treatment[J].Journal of Aerospace Power,1999,14(3):270-274.(in Chinese)
|
| [4] |
李玲,于清,陆亚钧.处理机匣在单级跨声速风扇上的实验研究[J].推进技术,2000,21(3):49-52. LI Ling,YU Qing,LU Yajun.Experimental research of casing treatment on single stage transonic fan[J].Journal of Propulsion Technology,2000,21(3):49-52.(in Chinese)
|
| [5] |
Wilke I,Kau H P.A numerical investigation of the flow mechanisms in a HPC front stage with axial slots .ASME Paper,GT-2003-38481,2003.
|
| [6] |
Wilke I,Kau H P.A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage .ASME Paper,GT-2002-30642,2002.
|
| [7] |
卢新根,楚武利,朱俊强,等.轴向斜缝机匣处理与转子通道之间耦合流动分析[J].工程热物理学报,2006,27(2):226-228. LU Xingen,CHU Wuli,ZHU Junqiang,et al.Analysis of the coupled flow through axial skewed slots casing treatment and rotor passage[J].Journal of Engineering Thermophysics,2006,27(2):226-228.(in Chinese)
|
| [8] |
祝剑虹,朴英,周建兴,等.跨声压气机缝式处理机匣非定常 模拟研究[J].航空动力学报,2008,23(5):882-888. ZHU Jianhong,PIAO Ying,ZHOU Jianxing,et al.Unsteady numerical simulation on transonic compressor with screwed slots casing treatment[J].Journal of Aerospace Power,2008,23(5):882-888.(in Chinese)
|
| [9] |
Engel K,Zscherp C,Wolfrum N,et al.CFD simulations of the TP400 IPC with enhanced casing treatment in off- design operating conditions .ASME Paper,GT-2009- 60324,2009.
|
| [10] |
Schnell R,Voges M,Mönig R.Investigation of blade tip interaction with casing treatment in a transoniccompressor Part 2:numerical results .ASME Paper,GT-2008-50212,2008.
|
| [11] |
Emmrich R,Kunte R,Hönen H,et al.Time resolved investigation of an axial compressor with casing treatment Part 2:simulation .ASME Paper,GT-2007-27582,2007.
|
| [12] |
Hembera M,Kau H P,Johann E.Simulation of casing treatments of a transonic compressor stage[J].International Journal of Rotating Machinery,2008,2008(1):1-10.
|