| Citation: | GAO Jin-zhong, ZHU Ru-peng, LI Zheng-min-qing. Research on singularities of base worm thread surface for hobbing or grinding face gear[J]. Journal of Aerospace Power, 2011, 26(10): 2394-2400.
|
| [1] |
Litvin F L,Zhang Y,Wang J C,et al.Design and geometry of face-gear drives[J].Transactions of ASME,Journal of Mechanical Design,1992,114(4):642-647.
|
| [2] |
Heath G F,Filler R R,Tan J.Development of face gear technology for industrial and aerospace power transmission .NASA/CR-2002-211320,2002.
|
| [3] |
Litvin F L,Wang J C,Bossler R B Jr.,et al.Application of face-gear drives in helicopter transmission[J].ASME Joutnal of Mechanical Design,1994,116(3):672-676.
|
| [4] |
Litvin F L,Alfonso F,Claudio Z,et al.Face-gear drive with spur involute pinion:geometry,generation by a worm,stress analysis .NASA/CR-2002-211362,2002.
|
| [5] |
Lewicki D G,Heath G F,Filler R R,et al.RDS-21 face-gear surface durability tests .NASA/TM-2007-214970,2007.
|
| [6] |
Litvin F L,Alfonso F,Ignacio G P,et al.Face gear drive with helical involute pinion:geometry,generation by a shaper and a worm,avoidance of singularities and stress anaysis .NASA/CR-2005-213443,2005.
|
| [7] |
Litvin F L.Theory of pearing .NASA/RP-1212(AVSCOM 88-C-C035),1989.
|
| [8] |
Tan J.Apparatus and method for improved precision grinding of face gears:U.S.,5823857 .1998-01-22.
|
| [9] |
Litvin F L,Chen Y D,Heath G F,et al.Apparatus for precision grinding face gear:U.S.,6146253 .2000-11-14.
|
| [10] |
Heath G F,Bossler R B Jr.Advanced rotorcraft transmission (ART) program final report .NASA/CR-191057,1993.
|
| [11] |
Litivin F L,Egelja A,Tan J,et al.Handbook on face gear drives with a spur involute pinion .NASA/CR-2000-209909,2000.
|
| [12] |
朱如鹏,潘升材,高德平.面齿轮传动的研究现状与发展[J].南京航空航天大学学报,1997,29(3):358-361. ZHU Rupeng,PAN Shengcai,GAO Deping.Current state and development of research on face gear drive[J].Journal of Nanjing University of Aeronautics & Astronautics,1997,29(3):358-361.(in Chinese)
|
| [13] |
李政民卿,朱如鹏.面齿轮滚磨刀具基蜗杆研究[J].机械科学与技术,2009,28(1):99-101. LI Zhengminqing,ZHU Rupeng.A study of worm of hobbing or grinding wheel for face gear[J].Mechanical Science and Technology for Aerospace Engineering,2009,28(1):99-101.(in Chinese)
|
| [14] |
王延忠,吴灿辉,葛旭阳,等.面齿轮滚刀基本蜗杆的设计方法[J].北京航空航天大学学报,2009,35(2):166-169. WANG Yanzhong,WU Canhui,GE Xuyang,et al.Basalworm designing method of face-gear hob[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):166-169.(in Chinese)
|
| [15] |
郭辉,赵宁,方宗德,等.基于接触有限元的面齿轮传动弯曲强度研究[J].航空动力学报,2008,23(8):1438-1422. GUO Hui,ZHAO Ning,FANG Zongde,et al.Research on bending strength of face gear transmission based on contact finite element method[J].Journal of Aerospace Power,2008,23(8):1422-1438.(in Chinese)
|
DownLoad: