| Citation: | WANG Zhen-pei, WANG Dan, ZHU Ji-hong, ZHANG Wei-hong. Parametrical FE modeling of blade and design optimization of its gravity center eccentricity[J]. Journal of Aerospace Power, 2011, 26(11): 2450-2458.
|
| [1] |
蔡肇云,金六周.航空发动机强度设计、试验手册(试用本):叶片强度与振动计算[M].北京:第三机械工业部第六研究院,1981.
|
| [2] |
《航空发动机设计手册》总编委会.航空发动机设计手册 第18册:叶片轮盘及主轴强度分析[M].北京:航空工业出版社,2001.
|
| [3] |
王咏梅,陈葆实.罩量调节对风扇压气机气动性能和强度影响的研究[J].航空发动机,2000,26(1):6-11. WANG Yongmei,CHEN Baoshi.The effect of the modification of gravity center eccentricity on aerodynamic performance and structural strength of fan/compressor[J].Aeroengine,2000,26(1):6-11.(in Chinese)
|
| [4] |
张正秋,邹正平,刘宝杰.高负荷风扇叶片重心线调节对叶片强度和气动性能的影响分析[J].航空学报,2006,27(3):380-385. ZHANG Zhengqiu,ZOU Zhengping,LIU Baojie.Influence of gravity center modification on structural strength and aerodynamic performance of blade in high load fan blade design[J].Acta Aeronoutica et Astronautica Sinica,2006,27(3):380-385.(in Chinese)
|
| [5] |
段海波,马枚.压气机叶片罩量优化的数学模型研究 //中国航空学会第八届发动机结构强度振动学术会议论文集.西安:西北工业大学出版社,1996:80-83.
|
| [6] |
王荣桥,林丹,樊江,等.基于特征的压气机叶片结构设计[J]. 航空发动机,2004,30(2):5-9. WANG Rongqiao,LIN Dan,FAN Jiang,et al.Feature-based structure design of compressor blades[J].Aeroengine,2004,30(2):5-9.(in Chinese)
|
| [7] |
Ahn C S,Kim K Y.Aerodynamic design optimization of a compressor rotor with Navier-Stokes analysis[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2003,217(2):179-184.
|
| [8] |
Jang C M,Kim K Y.Optimization of a stator blade using response surface method in a single-stage transonic axial compressor[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2005,219(8):595-603.
|
| [9] |
Jang C M,Li P,Kim K Y.Optimization of blade sweep in a transonic axial compressor rotor[J].JSME International Journal-Series B,2005,48(4):793-801.
|
| [10] |
Samad A,Kim K Y.Multi-objective optimization of an axial compressor blade[J].Journal of Mechanical Science and Technology,2008,22(5):999-1007.
|
| [11] |
Samad A,Kim K Y.Shape optimization of an axial compressor blade by multi-objective genetic algorithm[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2008,222(6):599-611.
|
| [12] |
Oyama A,Liou M S,Obayashi S.Transonic axial-flow blade shape optimization using evolutionary algorithm and three-dimensional Navier-Stokes solver .AIAA Paper 2002-5642,2002.
|
| [13] |
周正贵.压气机/风扇叶片自动优化设计的研究现状和关键技术[J].航空学报,2008,29(2):257-266. ZHOU Zhenggui.Current situations and key techniques of automatic aerodynamic design of compressor/fan blades[J].Acta Aeronoutica et Astronautica Sinica,2008,29(2):257-266.(in Chinese)
|
| [14] |
杨军刚.压力载荷作用下的结构拓扑形状联合优化 .西安:西北工业大学,2009. YANG Jungang.Simultaneous topology and shape optimization of structure under pressure loads .Xi'an:Northwestern Polytechnical University,2009.(in Chinese)
|
| [15] |
ZHANG Weihong,WANG Dan,YANG Jungang.A parametric mapping method for curve shape optimization on 3D panel structures[J].International Journal for Numerical Methods in Engineering,2010,84(4):485-504.
|
DownLoad: