Volume 26 Issue 12
Dec.  2011
Turn off MathJax
Article Contents
WU Hong, LIU Yu-sheng, XU Guo-qiang. Experimental investigation on heat transfer in complex internal cooling blade channel with leading-edge[J]. Journal of Aerospace Power, 2011, 26(12): 2641-2647.
Citation: WU Hong, LIU Yu-sheng, XU Guo-qiang. Experimental investigation on heat transfer in complex internal cooling blade channel with leading-edge[J]. Journal of Aerospace Power, 2011, 26(12): 2641-2647.

Experimental investigation on heat transfer in complex internal cooling blade channel with leading-edge

  • Received Date: 2010-12-28
  • Rev Recd Date: 2011-04-12
  • Publish Date: 2011-12-28
  • Heat transfer characteristics of complex serpentine channels with leading-edge impingement in static turbine blade were investigated using the transient thermochromic liquid crystal technique under different Reynolds numbers.Distributions of local heat transfer coefficient at different positions were obtained on both pressure and suction sides.Experimental results show that:local heat transfer between two ribs is stronger than that in smooth region on inner surface of blade channels.A single heat transfer peak occurs between two adjacent ribs along the flow direction.With increase of Reynolds number,heat transfer is enhanced on all surfaces and centrifugal effect of fluid is strengthened in non-rib area downstream the bend,resulting in uneven distribution of local heat transfer there.However,ribs after the bend can reduce this effect significantly.Besides,mainstream speed changes caused by expansion and contraction of channel cross-section also influence the values and distributions of local heat transfer.

     

  • loading
  • [1]
    Huh M,Lei J,Liu Y H,et al.High rotation number effects on heat transfer in a rectangular(AR=2:1) two pass channel[R].ASME Paper GT2009-59421,2009.
    [2]
    Zehnder F,Schüler M,Weigand B,et al.The effect of turning vanes on pressure loss and heat transfer of a ribbed rectangular two-pass internal cooling channel[R].ASME Paper GT2009-59482,2009.
    [3]
    Rallabandi A P,Yang H T,Han J C.Heat transfer and pressure drop correlations for square channels with 45 deg ribs at high Reynolds numbers[J].Journal of Heat Transfer,2009,131(7):071703-1-10.
    [4]
    Tanda G,Abram R.Forced convection heat transfer in channels with rib turbulators inclined at 45 deg[J].Journal of Turbomachinery,2009,131(2):021012(10 pages).
    [5]
    Chanteloup D,Blcs A.Flow characteristics in two-leg internal coolant passages of gas turbine airfoils with film-cooling hole ejection[J].Journal of Turbomachinery,2002,124(3):499-507.
    [6]
    Babu C S,Das P,Prabhu S V.Local heat transfer distribution in a square channel with single walled and double walled ribs[R].AIAA Paper 2002-3088,2002.
    [7]
    Sch?ler M,Zehnder F,Weigand B,et al.The effect of side wall mass extraction on pressure loss and heat transfer of a ribbed rectangular two-pass internal cooling channel[R].ASME Paper GT2009-59481,2009.
    [8]
    Liu Y H,Han J C,Huh M,et al.High rotation number effect on heat transfer in a triangular channel with 45?,inverted 45?,and 90? ribs[R].ASME Paper GT2009-59216,2009.
    [9]
    Lee S W,Ahn H S,Lau S C.Heat(mass) transfer distribution in a two-pass trapezoidal channel with a 180 deg turn[J].Journal of Heat Transfer,2007,129(11):1529-1537.
    [10]
    刘湘云,丁水汀,陶智,等.变截面U形通道内肋高对换热特性影响的实验[J].航空动力学报,2007,22(7):1138-1141. LIU Xiangyun,DING Shuiting,TAO Zhi,et al.Experimental study of heat transfer in snake-shaped variable cross-section channels with different ribs heights[J].Journal of Aerospace Power,2007,22(7):1138-1141.(in Chinese)
    [11]
    周雷声,朱惠人,杨祺,等.带射流的收缩型通道内部换热特性液晶瞬态实验[J].航空学报,2010,31(1):35-40. ZHOU Leisheng,ZHU Huiren,YANG Qi,et al.Internal heat transfer experiment with liquid crystal transient technique in contraction channel with jet[J].Acta Aeronautica et Astronautica Sinica,2010,31(1):35-40.(in Chinese)
    [12]
    杨通海,朱惠人,张丽,等.窄通道内冲击冷却局部换热特性的瞬态液晶测量[J].航空学报,2009,30(11):2031-2036. YANG Tonghai,ZHU Huiren,ZHANG Li,et al.Local heat transfer measurements in narrow impingement channel by transient liquid crystal technique[J].Acta Aeronautica et Astronautica Sinica,2009,30(11):2031-2036.(in Chinese)
    [13]
    Wagner G,Kotulla M,Ott P,et al.The transient liquid crystal technique:influence of surface curvature and finite wall thickness[J].Journal of Turbomachinery,2005,127(1):175-182.
    [14]
    Metzger D E,Larson D E.Use of melting point surface coatings for local convection heat transfer measurements in rectangular channel flows with 90-deg turns[J].Journal of Heat Transfer,1986,108(1):48-54.
    [15]
    Schabacker J,Blcs A,Johnson B V.PIV investigation of the flow characteristics in an internal coolant passage with 45?rib arrangement[R].ASME Paper 99-GT-120,1999.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (2150) PDF downloads(14) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return