| Citation: | ZHOU Kun-yuan, LUO Xiang, XU Guo-qiang. Numerical simulation of rotationally-induced ingress through turbine rim seals[J]. Journal of Aerospace Power, 2011, 26(12): 2704-2709.
|
| [1] |
曹玉璋,陶智,徐国强,等.航空发动机传热学[M].北京:北京航空航天大学出版社,2005.
|
| [2] |
Wang C Z,Johnson B V,De Jong F,et al.Comparison of flow characteristics in axial-gap seals for close- and wide-spaced turbine stages[C]//Proceedings of ASME Turbo Expo 2007.Montreal,Canada:Amer. Soc. Mechanical Engineers,2007:1219-1229.
|
| [3] |
Owen J M,Rogers R H.Flow and heat transfer in rotating-disc systems Volume 1:rotor-stator systems[M].UK:Research Studies Press,John Wiley and Sons,1989.
|
| [4] |
Bayley F J,Owen J M.The fluid dynamics of a shrouded disk system with a radial outflow of coolant[J].ASME J. Eng. Power,1970,92:335-341.
|
| [5] |
Graber D J,Daniels W A,Johnson B V.Disk pumping test,final report[R].Air Force Wright Aeronautical Laboratories,Report No.AFWAL-TR-87-2050,1987.
|
| [6] |
Daniels W A,Johnson B V,Graber D J,et al.Rim seal experiments and analysis for turbine applications[J].Journal of Turbomachinery,1992,114(2):426-432.
|
| [7] |
Phadke U P,Owen J M.Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems Part 1:the behaviour of simple shrouded rotating-disk systems in a quiescent environment[J].International Journal Heat Fluid Flow,1988,9(2):98-105.
|
| [8] |
Phadke U P,Owen J M.Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems Part 2:the performance of simple seals in a quasi-axisymmetric external flow[J].International Journal Heat Fluid Flow,1988,9(2):106-112.
|
| [9] |
Chew J W,Dadkhah S,Turner A B.Rim sealing of rotor-stator wheelspaces in the absence of external flow[J].Journal of Turbomachinery,1992,114(2):433-438.
|
| [10] |
Chew J W.A theoretical study of ingress for shrouded rotating disk systems with radial outflow[J].Journal of Turbomachinery,1991,113(1):91-97.
|
| [11] |
Dadkhah S,Turner A B,Chew J W.Performance of radial clearance rim seals in upstream and downstream rotor-stator wheelspaces[J].Journal of Turbomachinery,1992,114(2):439-445.
|
| [12] |
Owen J M.Prediction of ingestion through turbine rim seals Part Ⅰ:rotationally induced ingress[J].Journal of Turbomachinery,2011,133(3):031005(9 pages).
|
| [13] |
Owen J M.Prediction of ingestion through turbine rim seals Part Ⅱ: externally induced and combined ingress[J].Journal of Turbomachinery,2011,133(3):031006(9 pages).
|
| [14] |
Owen J M,Zhou K,Pountney O,et al.Prediction of ingress through turbine rim seals Part 1:externally-induced ingress[C]//Proceedings of ASME Turbo Expo 2010.Glasgow,Scotland,UK: Amer. Soc. Mechanical Engineers,2010: 1217-1234.
|
| [15] |
Owen J M,Pountney O,Lock G D.Prediction of ingress through turbine rim seals Part 2:combined ingress[C]//Proceedings of ASME Turbo Expo 2010.Glasgow,Scotland,UK:Amer. Soc. Mechanical Engineers,2010:1235-1245.
|
| [16] |
Bohn D,Rudzinski B,Surken N,et al.Influence of rim seal geometry on hot gas ingestion into the upstream cavity of an axial turbine stage[C]//Proceedings of ASME Turbo Expo 1999.Indiana,USA:Amer. Soc. Mechanical Engineers,1999.
|
DownLoad: