| Citation: | JIA Wei, LIU Huo-xing. Effect of tip injection on the flow of near-stall condition in a transonic rotor[J]. Journal of Aerospace Power, 2011, 26(12): 2731-2740.
|
| [1] |
Pouagare M,Lazarus K,Weinhold W P.Tip leakage reduction through tip injection in turbomachines[R].AIAA-1986-1746,1986.
|
| [2] |
Leinhos D C,Scheidler S,Fottner L.Active stabilization of a low pressure compressor in a turbofan engine with constant air injection[R].AIAA-2001-3312,2001.
|
| [3] |
SHENG Chunhua,Remotigue M.Numerical simulation of rotor 35 with and without tip injection using an arbitrary Mach number flow solver[R].AIAA-2004-372,2004.
|
| [4] |
Suder K,Hathaway M D,Thorp S,A,et al.Compressor stability enhancement using discrete tip injection[J].Journal of Turbomachinery,2001,123(1):14-23.
|
| [5] |
Weigl H J,Paduano J D,Frechette L G,et al.Active sta-bilization of rotating stall and surge in a transonic single stage axial compressor[J].Journal of Turbomachinery,1998,120(4):625-636.
|
| [6] |
Koch C C,Smith L H.Experimental evaluation of outer casing blowing or bleeding of single stage axial flow compressor Part Ⅳ:performance of bleed insert configuration No.3[R].NASA-CR-54590,2008.
|
| [7] |
Lee N K W,Greitzer E M.Effects of endwall suction and blowing on compressor stability enhancement[J].Journal of Turbomachinery,1990,112(1):133-144.
|
| [8] |
Khaleghi H,Teixeria J A,Tousi A M,et al.Parametric study of injection angle effects on stability of transonic axial compressors[J].Journal of Propulsion and Power,2008,24(5):1100-1107.
|
| [9] |
Beheshti B H,Ghorbanian K,Farhanieh B,et al.A new design for tip injection in transonic axial compressors[R].ASME Paper GT 2006-90007,2006.
|
| [10] |
童志庭,聂超群.微喷气提高轴流压气机稳定性的研究[J].工程热物理学报,2006,27(3):121-123. TONG Zhiting,NIE Chaoqun.Investigation on micro tip injection improving the stability of an axial compressor[J].Journal of Engineering Thermophysics,2006,27(3):411-413.(in Chinese)
|
| [11] |
徐纲,聂超群,黄伟光,等.低速轴流压气机顶部微量喷气控制失速机理的数值模拟[J].工程热物理学报,2004,25(1):37-40. XU Gang,NIE Chaoqun,HUANG Weiguang, et al.Numerical simulation of micro injection in a low-speed axial compressor[J].Journal of Engineering Thermophysics,2004,25(1):37-40.(in Chinese)
|
| [12] |
耿少娟,朱俊强,戴冀,等.叶尖喷气影响低离心压气机特性的数值分析[J]. 工程热物理学报,2006,27(3):411-413. GENG Shaojuan,ZHU Junqiang,DAI Ji,et al.Numerical study of the effects of steady tip injection on the performance of low-speed centrifugal compressor[J].Journal of Engineering Thermophysics,2006,27(3):411-413.(in Chinese)
|
| [13] |
耿少娟,张宏武,朱俊强,等.喷气对低速轴流压气机转子叶顶区域流动的影响[J].工程热物理学报,2007,28(3):395-398. GENG Shaojuan,ZHANG Hongwu,ZHU Junqiang,et al. Effects of micro air injection on rotor tip flow in a low-speed isolated axial compressor rotor[J].Journal of Engineering Thermophysics,2007,28(3):395-398.(in Chinese)
|
| [14] |
马文生,顾春伟.轴流压气机跨声级转子叶顶喷气的流动特性[J].推进技术,2009,30(3):302-307. MA Wensheng,GU Chunwei.Tip injection in transonic axial compressor rotor[J].Journal of Propulsion Technology,2009,30(3):302-307.(in Chinese)
|
| [15] |
Khalrghi H,Boroomand M,Teixeria J A,et al.A nume-rical study of the effects of injection velocity on stabi-lity improvement in high-speed compressors[J].Proceedings of the Institution of Mechanical Engineers Part A:Journal of Power and Energy,2008,222(2):189-198.
|
| [16] |
Leihman B A,Cumpsty N A,Denton J D.Effects of bleed rate and endwall location on the aerodynamic behavior of a circular hole bleed off-take[R].ASME Paper GT-2004-54719,2004.
|
| [17] |
Moove R D,Moore,Lonnie R.Performance of single-stage axial-flow transonic compressor with rotor and stator aspect ratios of 1.19 and 1.26,respectively,and with design pressure ratio of 2.05[R].NASA Technical Paper 1659,1980.
|
| [18] |
Hathaway M D.Self-recirculating casing treatment concept for enhanced compressor performance[R].ASME Paper GT 2002-30368,2002.
|
DownLoad: