Volume 26 Issue 12
Dec.  2011
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2011  >  26(12): 2791-2797
LI Hui-guang, LIU Heng, YU Lie. Determination of preload force of circumferential distributed rod fastening rotor[J]. Journal of Aerospace Power, 2011, 26(12): 2791-2797.
Citation: LI Hui-guang, LIU Heng, YU Lie. Determination of preload force of circumferential distributed rod fastening rotor[J]. Journal of Aerospace Power, 2011, 26(12): 2791-2797.
shu

Determination of preload force of circumferential distributed rod fastening rotor

  • 1.

    School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China

  • 2.

    State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710049, China

  • Received Date: 2011-01-04
  • Rev Recd Date: 2011-05-08
  • Publish Date: 2011-12-28
    Abstract
  • Three dimensional finite element stress analysis of circumferential distributed rod fastening rotor considering contact was performed.The evolution laws of stress distribution and interface contact status were revealed with different preload forces and operation conditions.The calculation results show that contact interface may separate locally and slide when the rod fastening rotor transmits power and lateral load,which results in its carrying capacity less than integral rotor.With the increase of preload force,rod fastening rotor can transmit greater load,but the maximum stress increases significantly and the strength margin of material decreases.According to the obtained stress level of rod fastening rotor and contact stress distribution and the ratio between tangential force and normal force of contact interface,the method for determining preload force of rod is given to ensure structural integrity and structural strength requirements.The analysis also provides references for preload force determination of such rod fastening rotor.

     

    • FullText(HTML)
  • loading
    • References(13)
  • [1]
    Ibrahima R A,Pettitb C L.Uncertainties and dynamic problems of bolted joints and other fasteners[J].Journal of Sound and Vibration,2005,279(3):857-936.
    [2]
    Cao J J,Bell A J.Elastic analysis of a circular flange joint subjected to axial force[J].International Journal of Pressure Vessels and Piping,1993,55(3):435-449.
    [3]
    Cao J J,Bell A J.Experimental study of circular flange joints in tubular structures[J].The Journal of Strain Analysis for Engineering Design,1996,31(4):259-267.
    [4]
    Nassar S A,Virupaksha V L,Ganeshmurthy S.Effect of bolt tightness on the behavior of composite joints[J].Journal of Pressure Vessel Technology,2007,129(1):43-51.
    [5]
    Pirmoz A,Daryana A S,Mazaherib A,et al.Behavior of bolted angle connections subjected to combined shear force and moment[J].Journal of Constructional Steel Research,2008,64(4):436-446.
    [6]
    Abid M,Ullah B.Three-dimensional nonlinear finite-element analysis of gasketed flange joint under combined internal pressure and variable temperatures[J].Journal of Engineering Mechanics,2007,133(2):222-229.
    [7]
    Fukuoka T.Finite element analysis of the thermal and mechanical behaviors of a bolted joint[J].Journal of Pressure Vessel Technology,2005,127(4):402-407.
    [8]
    Pau M,Baldi A.Application of an ultrasonic technique to assess contact performance of bolted joints[J].Journal of Pressure Technology,2007,129(1):175-185.
    [9]
    Janssen M J,Joyce J S.35-year old splined-disc rotor design for large gas turbine[EB/OL].[2009-03-19].http://www.electricity-today.com/et/Oct96/turb.htm.
    [10]
    尹泽勇.现代燃气轮机转子循环对称接触有限元应力分析[M].北京:国防工业出版社,1994.
    [11]
    尹泽勇,胡柏安,吴建国,等.端齿连接转子轴向预紧力的确定[J].航空动力学报,1996,9(2):355-357. YIN Zeyong,HU Bai''an,WU Jianguo,et al.Determination of axial preloads of rotors with curvic couplings[J].Journal of Aerospace Power,1996,9(2):355-357.(in Chinese)
    [12]
    胡柏安,尹泽勇,徐友良.两段预紧的端齿连接转子轴向预紧力的确定[J].机械强度,1999,21(4):274-276. HU Bai''an,YIN Zeyong,XU Youliang.Determination of axial preloads of rotor with curvic couplings pretightened into two segments[J].Journal of Mechanical Strength,1999,21(4):274-276.(in Chinese)
    [13]
    郭飞跃,邓旺群,成晓鸣.涡轴发动机组合压气机转子轴向预紧力计算方法[J].航空动力学报,2004,19(5):623-629. GUO Feiyue,DENG Wangqun,CHENG Xiaoming.A method for calculating axial preload of turbo-shaft engine combined compressor rotor[J].Journal of Aerospace Power,2004,19(5):623-629.(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(1044.0KB)
    XML

    Article Metrics

    Article views (1575) PDF downloads(22) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return