| Citation: | GAO Jian-hui, WEN Wei-dong, CUI Hai-tao. Optimal design for temperature and structure of the float-wall of flame tube[J]. Journal of Aerospace Power, 2012, 27(3): 588-594.
|
| [1] |
梁春华.现代典型军民用涡扇发动机的先进技术[J].航空科学技术,2004,90(2):20-24. LIANG Chunhua.Modern typical military and civilian use advanced technology of turbofan engine[J].Aviation Science and Technology,2004,90(2):20-24.(in Chinese)
|
| [2] |
赵清杰,李彬.浮动瓦块冷却结构在燃烧室中的应用和发展[J].燃气涡轮试验与研究,2001,14(1):10-13. ZHAO Qingjie,LI Bin.Application and development of floating panel cooling structure in combustors[J].Gas Turbine Experiment and Research,2001,14(1):10-13.(in Chinese)
|
| [3] |
胡超,许全宏,徐剑,等.冲击/发散冷却壁温分布和冷却效率研究[J].航空动力学报,2008,23(10):1800-1804. HU Chao,XU Quanhong,XU Jian,et al.Investigation of the wall temperature distribution and cooling efficiency for impingement/effusion cooling scheme[J].Journal of Aerospace Power,2008,23(10):1800-1804.(in Chinese)
|
| [4] |
Cho H H,Rhee D H,Goldstein R J.Effect of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing.ASME GT2004-53685,2004.
|
| [5] |
陈焱,吉洪湖,胡娅萍,等.致密微孔壁绝热冷却效果研究[J].工程热物理学报,2006,27(增2):25-28. CHEN Yan,JI Honghu,HU Yaping,et al.Investigation of adiabatic cooling effectiveness of an effusion cooled plate[J].Journal of Engineering Thermophysics,2006,27(Suppl 2):25-28.(in Chinese)
|
| [6] |
林宇震,俞文利,刘高恩,等.冲击加发散双层壁冷却方式压降分配对斜孔内对流换热影响的研究[J].航空学报,2003,24(2):97-101. LIN Yuzhen,YU Wenli,LIU Gaoen,et al.Influence of pressure drop distribution on the convection heat transfer inside the inclined hole of impingement/effusion cooling[J].Acta Aeronautica et Astronautica Sinica,2003,24(2):97-101.(in Chinese)
|
| [7] |
宋双文,杨卫华,胡好生,等.冲击+逆向对流+气膜冷却传热特性的研究[J].航空动力学报,2007,22(9):1418-1421. SONG Shuangwen,YANG Weihua,HU Haosheng,et al.Experimental study of the heat transfer characteristics of combined cooling of impingement+reversed[J].Journal of Aerospace Power,2007,22(9):1418-1421.(in Chinese)
|
| [8] |
李彬,吉洪湖,江义军.冲击-发散冷却火焰筒浮动瓦片三维壁温计算分析[J].航空动力学报,2007,22(3):370-374. LI Bin,JI Honghu,JIANG Yiju.Numerical analysis of 3D temperature field of an impingement-effusion cooled flame tube floating tile[J].Journal of Aerospace Power,2007,22(3):370-374.(in Chinese)
|
| [9] |
李彬.冲击-致密微孔浮动壁火焰筒冷却研究.南京:南京航空航天大学,2007. LI Bin.Investigation of impingement/effusion float-wall cooling of flame tube.Nanjing:Nanjing University of Aeronautics and Astronautics,2007.(in Chinese)
|
| [10] |
张宏建.燃烧室浮动壁结构优化方法研究.南京:南京航空航天大学,2005. ZHANG Hongjian.Structure optimization method of the float-tile.Nanjing:Nanjing University of Aeronautics and Astronautics,2005.(in Chinese)
|
| [11] |
王伟,杨伟,赵美英,等.基于神经网络与杂交算法的机翼结构优化设计[J].机械设计,2007,24(8):49-52 WANG Wei,YANG Wei,ZHAO Meiying,et al.Optimization design of aerofoil structure based on neural network and hybridization algorithm[J].Journal of Machine Design,2007,24(8):49-52.(in Chinese)
|
| [12] |
王维刚,龙飞.基于BP神经网络和改进遗传算法的蒸发器支座结构优化设计[J].化工机械,2009,36(4):317-322. WANG Weigang,LONG Fei.Optimum design of support brackets of evaporators based on BP neural network and improved genetic algorithm[J].Chemical Engineering and Machinery,2009,36(4):317-322.(in Chinese)
|
| [13] |
邓江华,刘献栋,冯国胜.基于神经网络和遗传算法的车身骨架结构优化设计[J].农业机械学报,2007,38(6):26-29. DENG Jianghua,LIU Xiandong,FENG Guosheng.Optimal design of bus frame structure on the basis of ANN and GE[J].Transactions of the Chinese Society of Agricultural Machinery,2007,38(6):26-29.(in Chinese)
|
DownLoad: