| Citation: | FENG Yin-li, WU Chang-bo, GAO Wei-qiang, CHEN Wei. Analysis technology and experiment for FGH96 disc’s LCF life[J]. Journal of Aerospace Power, 2012, 27(3): 628-634.
|
| [1] |
宋兆泓.航空发动机典型故障分析[M].北京:北京航空航天大学出版社,1993.
|
| [2] |
Tresa M P,Sammy T.Nickel-based superalloys for advanced turbine engines:chemistry,microstructure,and properties[J].Journal of Propulsion and Power,2006,22(2):361-373.
|
| [3] |
Thomas A C,Sankaran M,Robert G T,et al.Fatigue reliability of gas turbine engine structure Part Ⅰ.NASA/CR-97-206215,1997.
|
| [4] |
张学仁.粉末冶金涡轮盘蠕变/疲劳寿命预测中的几个问题 //第九届航空发动机结构强度振动学术会议论文集.武夷山,福建:中国航空学会航空发动机结构强度振动专业委员会.1998:61-66.
|
| [5] |
Grison J,Remy L.Fatigue failure probability in a powder metallurgy Ni-based superalloy[J].Engineering Fracture and Mechanics,1997,57(1):41-55.
|
| [6] |
Bussac A D,Lautridou J C.A probabilistic model for prediction of LCF surface crack initiation in PM alloys[J].Fatigue and Fracture of Engineering Materials & Structures,1993,16(8):861-874.
|
| [7] |
Luo J,Bowen P.Small and long fatigue crack growth behavior of a PM Ni-based superalloy Udimet 720[J].International Journal of Fatigue,2004,26(2):113-124.
|
| [8] |
徐凌志,吕文林.粉末冶金涡轮盘裂纹扩展失效概率分析[J].机械科学与技术,2000,19(2):210-212. XU Lingzhi,LV Wenlin.Crack growth failure probability of PM turbine disk[J].Mechanical Science and Techology,2000,19(2):210-212.(in Chinese)
|
| [9] |
宋迎东.粉末冶金涡轮盘强度与寿命研究.南京:南京航空航天大学,1997. SONG Yingdong.Study on strength and life of power metallurgy turbine disc.Nanjing:Nanjing University of Aeronautics and Astronautics,1997.(in Chinese)
|
| [10] |
赵勇铭,宋迎东.夹杂对粉末高温合金裂纹扩展寿命的影响[J].航空动力学报,2005,20(5):772-777. ZHAO Yongming,SONG Yingdong.Influence of inclusions on crack growth life of powder metallurgy[J]. Journal of Aerospace Power,2005,20(5):772-777.(in Chinese)
|
| [11] |
魏大盛,杨晓光,王延荣.基于缺陷概率特点的粉末冶金材料寿命预测概率模型[J].航空动力学报,2005,20(6):951-957. WEI Dasheng,YANG Xiaoguang,WANG Yanrong.Aprobabilistic model for prediction of life based on probabilistic character of defect in PM alloys[J].Journal of Aerospace Power,2005,20(6):951-957.(in Chinese)
|
| [12] |
蔚夺魁.粉末冶金材料轮盘定寿方法初探[J].航空发动机,1998(4):36-42. YU Duokui.Research for life forecasting method of P/M disk[J].Aeroengine,1998(4):36-42.(in Chinese)
|
| [13] |
冯引利,曹凤兰,王卫国,等.FGH96 亚尺寸粉末冶金盘低循环疲劳寿命可靠性分析及试验研究[J].燃气涡轮试验与研究,2007,20(2):53-57. FENG Yinli,CAO Fenglan,WANG Weiguo,et al.Reliability analysis on a FGH96 P/M sub-scale disk and experimental investigation[J].Gas Turbine Experiment and Research,2007,20(2):53-57.(in Chinese)
|
| [14] |
曹凤兰,卿华,古远兴,等.FGH96 粉末高温合金亚尺寸轮盘研制及试验验证[J].燃气涡轮试验与研究,2007,20(3):15-17. CAO Fenglan,QING Hua,GU Yuanxing et al.Research and experiment on FGH96 P/M superalloy sub-scale disk[J].Gas Turbine Experiment and Research,2007,20(3):15-17.(in Chinese)
|
DownLoad: